Comments (15)
mscdex
commented on June 26, 2024
Can you provide a simple example that reproduces this? Also what node version are you using?
from ssh2.
rferro
commented on June 26, 2024
I'm using node v0.10.12.
See this example:
var ssh2 = require('ssh2');
var conn = new ssh2();
function exec(conn, cmd, callback) {
conn.exec(cmd, function(err, stream) {
if (err) throw err;
var out = "";
stream.on('data', function(data, extended) {
console.log('> DATA', cmd);
out += data.toString();
});
stream.on('exit', function(code, signal) {
console.log('> EXIT', cmd);
callback(null, out.split("\n"));
});
});
};
conn.on('ready', function() {
exec(conn, 'echo 1; seq 3', function(err, out) {
console.log('> 1 OUT', out);
exec(conn, 'echo 2; seq 3', function(err, out) {
console.log('> 2 OUT', out);
conn.end();
});
});
});
conn.connect({
host: 'host',
port: 22,
username: 'user',
privateKey: require('fs').readFileSync('key.pem')
});Most of the time the output is:
> DATA echo 1; seq 3
> DATA echo 1; seq 3
> EXIT echo 1; seq 3
> 1 OUT [ '1', '1', '2', '3', '' ]
> DATA echo 2; seq 3
> DATA echo 2; seq 3
> EXIT echo 2; seq 3
> 2 OUT [ '2', '1', '2', '3', '' ]
But sometimes the output is:
> DATA echo 1; seq 3
> DATA echo 1; seq 3
> EXIT echo 1; seq 3
> 1 OUT [ '1', '1', '2', '3', '' ]
> DATA echo 2; seq 3
> EXIT echo 2; seq 3
> 2 OUT [ '2', '' ]
> DATA echo 2; seq 3
The second 'data' event of command "echo 2; seq 3" was triggered after the event 'exit'.
from ssh2.
rferro
commented on June 26, 2024
sorry, I closed this issue by mistake.
from ssh2.
mscdex
commented on June 26, 2024
Can you set debug: console.log in the settings passed to connect() and post the output here?
from ssh2.
rferro
commented on June 26, 2024
DEBUG: Parser: STATE_INIT
DEBUG: Parser: STATE_GREETING
DEBUG: Parser: STATE_HEADER
DEBUG: Connection: Server ident: 'SSH-2.0-OpenSSH_4.7p1 Debian-8ubuntu3'
DEBUG: Parser: STATE_PACKETBEFORE (expecting 8)
DEBUG: Connection: Sent KEXINIT
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 776
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: KEXINIT
DEBUG: Connection: Comparing KEXInits...
DEBUG: Connection: Sent KEXDH_INIT
DEBUG: Parser: STATE_PACKETBEFORE (expecting 8)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 824
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: KEXDH_REPLY
DEBUG: Connection: Sent NEWKEYS
DEBUG: Parser: STATE_PACKETBEFORE (expecting 8)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 8
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: NEWKEYS
DEBUG: Connection: Sent SERVICE_REQUEST
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 16
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: SERVICE_ACCEPT
DEBUG: Connection: Sent USERAUTH_REQUEST (publickey -- check)
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 288
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: USERAUTH_PK_OK
DEBUG: Connection: Sent USERAUTH_REQUEST (publickey)
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 0
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: USERAUTH_SUCCESS
DEBUG: Connection: Sent CHANNEL_OPEN
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 16
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_OPEN_CONFIRMATION
DEBUG: Channel: Sent CHANNEL_REQUEST (exec)
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 16
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_WINDOW_ADJUST
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 0
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_SUCCESS
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 16
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_DATA
> DATA echo 1; seq 3
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 32
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_REQUEST
> EXIT echo 1; seq 3
> 1 OUT [ '1', '' ]
DEBUG: Connection: Sent CHANNEL_OPEN
DEBUG: Channel: Sent CLOSE
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 16
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_DATA
> DATA echo 1; seq 3
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 0
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_EOF
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 0
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_CLOSE
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 16
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_OPEN_CONFIRMATION
DEBUG: Channel: Sent CHANNEL_REQUEST (exec)
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 16
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_WINDOW_ADJUST
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 0
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_SUCCESS
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 16
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_DATA
> DATA echo 2; seq 3
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 16
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_DATA
> DATA echo 2; seq 3
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 32
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_REQUEST
> EXIT echo 2; seq 3
> 2 OUT [ '2', '1', '2', '3', '' ]
DEBUG: Connection: Sent DISCONNECT
DEBUG: Channel: Sent CLOSE
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 0
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_EOF
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
DEBUG: Parser: STATE_PACKET
DEBUG: Parser: remainLen === 0
DEBUG: Parser: STATE_PACKETDATA
DEBUG: Parser: hmacSize === 16
DEBUG: Parser: STATE_PACKETDATAVERIFY
DEBUG: Parser: STATE_PACKETDATAAFTER, packet: CHANNEL_CLOSE
DEBUG: Parser: STATE_PACKETBEFORE (expecting 16)
from ssh2.
mscdex
commented on June 26, 2024
You should really use the 'close' event on the stream instead of 'exit' if you're buffering data like this. Like node's child_process.spawn(), when 'exit' is emitted, the stdout/stderr "streams" can still be open.
from ssh2.
rferro
commented on June 26, 2024
Tks
from ssh2.
atd
commented on June 26, 2024
I am having same problem. Using node v0.10.29 and close event.
If I run it invoking gulp from shell, everything goes fine. But jenkins fails with
....
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
data:
undefined:0
^
SyntaxError: Unexpected end of input
at Object.parse (native)
at Channel.<anonymous> (/var/lib/jenkins/jobs/Pear2Pear/workspace/gulpfile.js:499:32)
at Channel.emit (events.js:95:17)
at SSH2Stream.<anonymous> (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/lib/Channel.js:124:14)
at SSH2Stream.g (events.js:180:16)
at SSH2Stream.emit (events.js:92:17)
at parsePacket (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/node_modules/ssh2-streams/lib/ssh.js:3437:10)
at SSH2Stream._transform (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/node_modules/ssh2-streams/lib/ssh.js:555:13)
at SSH2Stream.Transform._read [as __read] (_stream_transform.js:179:10)
at SSH2Stream._read (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/node_modules/ssh2-streams/lib/ssh.js:213:15)
Code:
connection.on('ready', function() {
connection.exec('docker inspect ' + config.deploy.swellrt.name, function(err, stream) {
if (err) { throw err ; }
var data = '';
stream.
on('data', function(d) {
data += d;
console.log(data);
}).
on('close', function() {
console.log('data: ' + data);
var container = JSON.parse(data)[0];
if (container) {
if (container.Config.Image === taggedImage) {
// Right image is deployed
console.log('swellrt already running');
done();
connection.end();
} else {
console.log('updating swellrt');
stop(container.Id, function() {
start();
});
}
} else {
console.log('swellrt not running');
start();
}
}).
stderr.on('data', function(data) { console.log('STDERR: ' + data); });
});
}).connect(config.deploy.swellrt.ssh);Debug output:
DEBUG: Client: Connected
DEBUG: Parser: IN_INIT
DEBUG: Parser: IN_GREETING
DEBUG: Parser: IN_HEADER
DEBUG: Remote ident: 'SSH-2.0-OpenSSH_6.7p1 Debian-5'
DEBUG: Outgoing: Writing KEXINIT
DEBUG: Parser: IN_PACKETBEFORE (expecting 8)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: pktLen:940,padLen:8,remainLen:936
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: IN_PACKETDATAAFTER, packet: KEXINIT
DEBUG: Comparing KEXINITs ...
DEBUG: (local) KEX algorithms: diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
DEBUG: (remote) KEX algorithms: [email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha1
DEBUG: KEX algorithm: diffie-hellman-group14-sha1
DEBUG: (local) Host key formats: ssh-rsa,ssh-dss
DEBUG: (remote) Host key formats: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
DEBUG: Host key format: ssh-rsa
DEBUG: (local) Client->Server ciphers: aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,blowfish-cbc,3des-cbc,arcfour256,arcfour128,cast128-cbc,arcfour
DEBUG: (remote) Client->Server ciphers: aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected],[email protected]
DEBUG: Client->Server Cipher: aes256-ctr
DEBUG: (local) Server->Client ciphers: aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,blowfish-cbc,3des-cbc,arcfour256,arcfour128,cast128-cbc,arcfour
DEBUG: (remote) Server->Client ciphers: aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected],[email protected]
DEBUG: Server->Client Cipher: aes256-ctr
DEBUG: (local) Client->Server HMAC algorithms: hmac-md5,hmac-sha1,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-sha1-96,hmac-md5-96
DEBUG: (remote) Client->Server HMAC algorithms: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
DEBUG: Client->Server HMAC algorithm: hmac-sha1
DEBUG: (local) Server->Client HMAC algorithms: hmac-md5,hmac-sha1,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-sha1-96,hmac-md5-96
DEBUG: (remote) Server->Client HMAC algorithms: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
DEBUG: Server->Client HMAC algorithm: hmac-sha1
DEBUG: (local) Client->Server compression algorithms: none
DEBUG: (remote) Client->Server compression algorithms: none,[email protected]
DEBUG: Client->Server compression algorithm: none
DEBUG: (local) Server->Client compression algorithms: none
DEBUG: (remote) Server->Client compression algorithms: none,[email protected]
DEBUG: Server->Client compression algorithm: none
DEBUG: Outgoing: Writing KEXDH_INIT
DEBUG: Parser: IN_PACKETBEFORE (expecting 8)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: pktLen:828,padLen:7,remainLen:824
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: IN_PACKETDATAAFTER, packet: KEXDH_REPLY
DEBUG: Checking host key format
DEBUG: Checking signature format
DEBUG: Verifying host fingerprint
DEBUG: Host accepted by default (no verification)
DEBUG: Verifying signature
DEBUG: Outgoing: Writing NEWKEYS
DEBUG: Parser: IN_PACKETBEFORE (expecting 8)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: pktLen:12,padLen:10,remainLen:8
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: IN_PACKETDATAAFTER, packet: NEWKEYS
DEBUG: Outgoing: Writing SERVICE_REQUEST (ssh-userauth)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:28,padLen:10,remainLen:16
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: Decrypting
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: SERVICE_ACCEPT
DEBUG: Outgoing: Writing USERAUTH_REQUEST (publickey -- check)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:300,padLen:4,remainLen:288
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: Decrypting
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: USERAUTH_PK_OK
DEBUG: Outgoing: Writing USERAUTH_REQUEST (publickey)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:12,padLen:10,remainLen:0
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: USERAUTH_SUCCESS
DEBUG: Outgoing: Writing CHANNEL_OPEN (0, session)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:28,padLen:10,remainLen:16
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: Decrypting
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: CHANNEL_OPEN_CONFIRMATION
DEBUG: Outgoing: Writing CHANNEL_REQUEST (0, exec)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:28,padLen:18,remainLen:16
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: Decrypting
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: CHANNEL_WINDOW_ADJUST (0, 2097152)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:12,padLen:6,remainLen:0
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: CHANNEL_SUCCESS (0)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:4732,padLen:11,remainLen:4720
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: Decrypting
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: CHANNEL_DATA (0)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:12,padLen:6,remainLen:0
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: CHANNEL_EOF (0)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:44,padLen:18,remainLen:32
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: Decrypting
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: CHANNEL_REQUEST (0, exit-status)
DEBUG: Outgoing: Writing CHANNEL_CLOSE (0)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:12,padLen:6,remainLen:0
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
data:
from ssh2.
mscdex
commented on June 26, 2024
@atd Can you use console.dir(data); instead? I'm not sure if that undefined:0 is part of data or if it's part of the exception message. Also, you might try logging the data from the stream.stderr stream to see if docker is spitting anything out on stderr.
from ssh2.
atd
commented on June 26, 2024
Thank you @mscdex
I though I was logging stream.stderr (see code in previous comment). If not, could you please provide me with more specific code?
I changed the code a little bit for logging the data along with the events:
stream.
on('data', function(d) {
data += d;
console.dir('on data: ' + data);
}).
on('close', function() {
console.log('on close: ' + data);
var container = JSON.parse(data)[0];
[....]There is no sign of the data event in the output:
[...]
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:44,padLen:18,remainLen:32
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: Decrypting
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: CHANNEL_REQUEST (0, exit-status)
DEBUG: Outgoing: Writing CHANNEL_CLOSE (0)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:12,padLen:6,remainLen:0
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
'on close: '
undefined:0
^
SyntaxError: Unexpected end of input
at Object.parse (native)
at Channel.<anonymous> (/var/lib/jenkins/jobs/Pear2Pear/workspace/gulpfile.js:500:32)
at Channel.emit (events.js:95:17)
at SSH2Stream.<anonymous> (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/lib/Channel.js:124:14)
at SSH2Stream.g (events.js:180:16)
at SSH2Stream.emit (events.js:92:17)
at parsePacket (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/node_modules/ssh2-streams/lib/ssh.js:3437:10)
at SSH2Stream._transform (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/node_modules/ssh2-streams/lib/ssh.js:555:13)
at SSH2Stream.Transform._read [as __read] (_stream_transform.js:179:10)
at SSH2Stream._read (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/node_modules/ssh2-streams/lib/ssh.js:213:15)
from ssh2.
atd
commented on June 26, 2024
Waiting 5s inside the close callback solves the issue
stream.
on('data', function(d) {
data += d;
console.dir('on data: ' + data);
}).
on('close', function() {
setTimeout(function() {
console.log('on close: ' + data);
var container = JSON.parse(data)[0];
[....]
}, 5000);from ssh2.
mscdex
commented on June 26, 2024
Can you try the master branch (removing your 5s timeout too) and let me know if that works for you?
from ssh2.
atd
commented on June 26, 2024
Sorry @mscdex but it still fails. Two tries, the first one passed but the job remained alive (I think the output was not closed). The second one failed with the usual behaviour
from ssh2.
mscdex
commented on June 26, 2024
@atd Can you provide debug output with the master branch? I want to verify that it's not closing the channel early still.
from ssh2.
atd
commented on June 26, 2024
Here it is
[...]
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: CHANNEL_EOF (0)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:44,padLen:18,remainLen:32
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: Decrypting
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
DEBUG: Parser: IN_PACKETDATAAFTER, packet: CHANNEL_REQUEST (0, exit-status)
DEBUG: Outgoing: Writing CHANNEL_CLOSE (0)
DEBUG: Parser: IN_PACKETBEFORE (expecting 16)
DEBUG: Parser: IN_PACKET
DEBUG: Parser: Decrypting
DEBUG: Parser: pktLen:12,padLen:6,remainLen:0
DEBUG: Parser: IN_PACKETDATA
DEBUG: Parser: HMAC size:20
DEBUG: Parser: IN_PACKETDATAVERIFY
DEBUG: Parser: Verifying MAC
DEBUG: Parser: IN_PACKETDATAVERIFY (Valid HMAC)
'on close: '
undefined:0
^
SyntaxError: Unexpected end of input
at Object.parse (native)
at Channel.<anonymous> (/var/lib/jenkins/jobs/Pear2Pear/workspace/gulpfile.js:500:32)
at Channel.emit (events.js:95:17)
at SSH2Stream.<anonymous> (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/lib/Channel.js:124:14)
at SSH2Stream.g (events.js:180:16)
at SSH2Stream.emit (events.js:92:17)
at parsePacket (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/node_modules/ssh2-streams/lib/ssh.js:3437:10)
at SSH2Stream._transform (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/node_modules/ssh2-streams/lib/ssh.js:555:13)
at SSH2Stream.Transform._read [as __read] (_stream_transform.js:179:10)
at SSH2Stream._read (/var/lib/jenkins/jobs/Pear2Pear/workspace/node_modules/ssh2/node_modules/ssh2-streams/lib/ssh.js:213:15)
from ssh2.
Related Issues (20)
- Issue Connecting to MongoDB via SSH Tunnel in Node.js HOT 1
- Issue/Suggestion :- Adding of maxEventListner on all the event HOT 4
- allow server to connect to forwarded agent from client HOT 1
- ecdsa-sha2-nistp256 private key support
- "Key auth required before password auth" error when connecting HOT 2
- READDIR hangs indefinitely HOT 12
- Specify `node-gyp` as a dependency. HOT 3
- SSH Client fails handshake when using publickey method HOT 7
- pm2 restart 0 No data is returned HOT 4
- Cannot find the bashrc source configuration when using ssh2 connect to the server HOT 3
- SSH version string "SSH-2.0-" is not accepted HOT 1
- Question: how to make gulp-ssh compatible with ssh2 HOT 5
- Handshake failed: no matching host key format HOT 2
- diffie-hellman-group-exchange-sha256 is very slow and take ~30 seconds HOT 5
- Error: Unsupported algorithm: arcfour256 HOT 1
- Error: (SSH) Channel open failure: open failed - upon third sftp operation, probably open connection leak HOT 1
- Generating ed25519 key pair can produce key pairs not readable by parseKey
- Access virtual machine on Teleport HOT 3
- "Instance unusable after fatal error" - Connection working for the first call, then failing HOT 3
- Check failed: node->IsInUse() HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ssh2.