Instructions to FlashSD card if you don't have a physical computer about content HOT 3 CLOSED

I did this and flashed successfully. However when put the micro sd card in the Raspberry PI 2 it does not boot up (just red and green light come on, no blinking)..... Any help would be appreciated.

Note about the sd card, its Samsung UHS-I card 32 gb. Its showing up as 60~ MB in windows explorer after flashing, diskpart lists it as 29 gb and 7gb used though... Not sure if any of that matters.

Thanks,

UPDATE: Okay reflashed and I got it working, thanks.

from content.

Hi Jeremy

First boot takes a while. I successfully booted . I think it took 10 minutes and one restart.

You didn't say if you had a monitor keyboard and mouse attached,

What version of OS are you running?

I think the issue is outside of using Dism from the Windows 10 ADK.

On May 3, 2015, at 4:05 PM, Jeremy [email protected] wrote:

I did this and flashed successfully. However when put the micro sd card in the Raspberry PI 2 it does not boot up (just red and green light come on, no blinking)..... Any help would be appreciated.

Note about the sd card, its Samsung UHS-I card 32 gb. Its showing up as 60~ MB in windows explorer after flashing, diskpart lists it as 29 gb and 7gb used though... Not sure if any of that matters.

Thanks,

—
Reply to this email directly or view it on GitHub.

from content.

We are considering alternatives, but at this time Windows 10 is the supported solution.

from content.