mplaban Goto Github PK

-cisc-processor-min-architecture-

The project aimed to design a CISC processor with a given MIN Architecture (Custom Architecture) with a given set of instructions (ADD, SUB, BRANCH, LOAD & STORE) with three addressing modes: Register direct, Memory to Register, and Memory to Memory.

-sequential-implementation-of-risc-v-instruction-set

•The project aimed to design the RV32I RISC instruction set using the given MIN Architecture. •The RTL Hardware flowcharts method determined the number of states required to complete an instruction. Each state was executed in one clock cycle.

androidbeginners-lesson1

androidbeginners-lesson2

awesomerobot

This project will provides the robot with the logic.

ball-tracking-using-opencv

This repository contains the code which tracks a ball and traces its path

car-count-system-in-parking-lot-using-fpga--

Designed and implemented an FPGA-based system to count the number of cars in a parking lot. Implemented logic to increment or decrement the car count based on the input from the sensors and debounce the generated pulses from two push buttons on FPGA (i.e pressure senors) Generated a 4-bit signal "CarCount" as the output.

competitive-programming

This repository contains some useful codes, techniques, algorithms and problem solutions helpful in Competitive Coding. Join with me on telegram group https://t.me/joinchat/GL4Y8RREZbz-Cp78R869CQ

encoder-mapping

eyrc20_survey-and-rescue

This repository contains the code for the theme Survey and Rescue of eYRC 19-20. The theme focused on simulating the survey operation by a drone in a disaster scenario.

fingerprint-door-lock

gsm-sim800a

holonomic-2d-mapping

The bot is programmed to have holonomic motion which can be controlled using a PS4 controller and is able to trace back a 2D mapped path in which it traverses.

holonomic-motion

VSSUT Robotics

holonomic-motion-with-ps4

hsc

hx711

An Arduino library to interface the Avia Semiconductor HX711 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales.

imutils

A series of convenience functions to make basic image processing operations such as translation, rotation, resizing, skeletonization, and displaying Matplotlib images easier with OpenCV and Python.

introduction-to-embbeded-systems

This repo contains the solutions of assignment completed during the mentioned coursera course.

k-means-clustering-project

This is practice project on the topic of K Means Clustering

lane_detection_example

This code helps in detecting lane using opecv techniques with a video or an image.

led-blink-with-555-timer

line-follower-and-color-sensing-bot

This was bot built using Arduino mega board for participating in the maze solving and line following event at NSSC, IIT Kharagpur-2018

mask_detector

medic

min-execution-unit-rtl-

The aim was to design the execution unit of the MIN (CISC) Processor with a given set of Instructions . Write a testbench to test the execution of an Instruction using Verilog Code. Software used for the project was QuestaSim

mnist-train

This repository contains code of a neural network from scratch without using any framework APIs like tensorflow and using torch tensors for calculations wherever possible using pytorch library.

motion_2019-2020

motortest-library

multihop_routing

nodes are available out of which one is the coordinator . The nodes can be configured with any address. On network startup the coordinator will transmit the information (payload upto max packet size). The nodes should discover the nearest neighbor and transmit the information to the last node in a multihop fashion