Check if injected is present about octoprint-multicolors HOT 9 CLOSED

Can you post the setting you use ? The GCODE and the REGEX ?

from octoprint-multicolors.

Hello @MoonshineSG ,
this is the GCODE:

G28 X Y
M117 Change filament
M0

and this is the REGEX:
layer {layer},.*?

from octoprint-multicolors.

and inside your code there are lines that match layer {layer},.*? ?

from octoprint-multicolors.

After download the file from octoprint I don't have any line that match with layer {layer},.*?

from octoprint-multicolors.

no... before that....

from octoprint-multicolors.

Where I check it without download the gcode?

from octoprint-multicolors.

hmmm... you need to make sure the regex will match the line in the slicer generated gcode. you need to do this once, and if you don't change the slicer, you probably wont need to touch it again.

from octoprint-multicolors.

ok, but how I check if the injection are effect?

from octoprint-multicolors.

there are 2 way. download the gcode (after you run the replacement) and check the lines ,or view it in octoprint and you will see the "pause" (head moves to 0,0) at the selected layer

from octoprint-multicolors.