Comments (11)
So, I was initially not using a virtual environment, and originally had the v0.4.0.0 installed to run the depthai_demp.py
, and got the same issue "X_LINK_DEVICE_NOT_FOUND" even after installing the requirements.txt
.
I don't understand how, but I managed to get it working after switching between versions by editing the requirements.txt
, then
switching back to the same version that was originally listed in the requirements.txt
(see below log). I did the following:
- originally had
0.4.0.0
installed to run thedepthai_demp.py
(got by runninginstall_requirements.py
in the main repo). (this isn't recorded in the log) - installed
0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
(this isn't recorded in the log) - installed
0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
(start of log) - installed
0.0.2.1+57205e4dad905895090ef51237deea0905390e66
- installed
0.0.2.1+6974a181509ca15bfb4fbb57bffbdecf87ff2448
- installed
0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
again, which "fixed" it (end of log)
I also tried it in a virtual environment just now and that seems to work just fine, but I'm not sure if accidentally "fixed" something earlier when I was messing around, rather than the virtual environment fixing it.
I'm on Windows 10, and just cloned the repo today.
Click to show log
Microsoft Windows [Version 10.0.19041.685]
(c) 2020 Microsoft Corporation. All rights reserved.
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python -m pip install -r requirements.txt
Looking in indexes: https://pypi.org/simple, https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/
Ignoring opencv-python: markers 'platform_machine == "armv7l"' don't match your environment
Collecting depthai==0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
Downloading https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/depthai/depthai-0.0.2.1%2Bb9918c481abaaeac51dd1d2b80fe6a150612f90a-cp38-cp38-win_amd64.whl (4.1 MB)
|████████████████████████████████| 4.1 MB 6.4 MB/s
Collecting opencv-python==4.2.0.34
Using cached opencv_python-4.2.0.34-cp38-cp38-win_amd64.whl (33.1 MB)
Requirement already satisfied: numpy>=1.17.3 in c:\users\drojf\appdata\local\programs\python\python38\lib\site-packages (from opencv-python==4.2.0.34->-r requirements.txt (line 1)) (1.19.3)
Installing collected packages: opencv-python, depthai
Attempting uninstall: opencv-python
Found existing installation: opencv-python 4.4.0.46
Uninstalling opencv-python-4.4.0.46:
Successfully uninstalled opencv-python-4.4.0.46
Attempting uninstall: depthai
Found existing installation: depthai 0.4.0.0
Uninstalling depthai-0.4.0.0:
Successfully uninstalled depthai-0.4.0.0
Successfully installed depthai-0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a opencv-python-4.2.0.34
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python main.py
Traceback (most recent call last):
File "main.py", line 20, in <module>
raise ValueError("Missing inference source! Either use \"-cam\" to run on DepthAI camera or \"-vid <path>\" to run on video file")
ValueError: Missing inference source! Either use "-cam" to run on DepthAI camera or "-vid <path>" to run on video file
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python main.py -cam
Loading pipeline...
Creating pipeline...
Creating Color Camera...
Creating Face Detection Neural Network...
Creating Landmarks Detection Neural Network...
Creating Head Pose Neural Network...
Creating Gaze Estimation Neural Network...
Pipeline created.
Traceback (most recent call last):
File "main.py", line 327, in <module>
Main(camera=args.camera).run()
File "main.py", line 104, in __init__
self.start_pipeline()
File "main.py", line 176, in start_pipeline
self.device = depthai.Device(self.pipeline)
RuntimeError: Failed to find device after booting, error message: X_LINK_DEVICE_NOT_FOUND
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python -m pip install -r requirements.txt
Looking in indexes: https://pypi.org/simple, https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/
Ignoring opencv-python: markers 'platform_machine == "armv7l"' don't match your environment
Requirement already satisfied: opencv-python==4.2.0.34 in c:\users\drojf\appdata\local\programs\python\python38\lib\site-packages (from -r requirements.txt (line 1)) (4.2.0.34)
Collecting depthai==0.0.2.1+57205e4dad905895090ef51237deea0905390e66
Downloading https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/depthai/depthai-0.0.2.1%2B57205e4dad905895090ef51237deea0905390e66-cp38-cp38-win_amd64.whl (4.1 MB)
|████████████████████████████████| 4.1 MB 6.8 MB/s
Requirement already satisfied: numpy>=1.17.3 in c:\users\drojf\appdata\local\programs\python\python38\lib\site-packages (from opencv-python==4.2.0.34->-r requirements.txt (line 1)) (1.19.3)
Installing collected packages: depthai
Attempting uninstall: depthai
Found existing installation: depthai 0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
Uninstalling depthai-0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a:
Successfully uninstalled depthai-0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
Successfully installed depthai-0.0.2.1+57205e4dad905895090ef51237deea0905390e66
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python main.py -cam
Loading pipeline...
Creating pipeline...
Creating Color Camera...
Creating Face Detection Neural Network...
Creating Landmarks Detection Neural Network...
Creating Head Pose Neural Network...
Creating Gaze Estimation Neural Network...
Pipeline created.
Traceback (most recent call last):
File "main.py", line 327, in <module>
Main(camera=args.camera).run()
File "main.py", line 104, in __init__
self.start_pipeline()
File "main.py", line 176, in start_pipeline
self.device = depthai.Device(self.pipeline)
RuntimeError: Failed to find device after booting, error message: X_LINK_DEVICE_NOT_FOUND
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python -m pip install -r requirements.txt
Looking in indexes: https://pypi.org/simple, https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/
Ignoring opencv-python: markers 'platform_machine == "armv7l"' don't match your environment
Requirement already satisfied: opencv-python==4.2.0.34 in c:\users\drojf\appdata\local\programs\python\python38\lib\site-packages (from -r requirements.txt (line 1)) (4.2.0.34)
Collecting depthai==0.0.2.1+6974a181509ca15bfb4fbb57bffbdecf87ff2448
Downloading https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/depthai/depthai-0.0.2.1%2B6974a181509ca15bfb4fbb57bffbdecf87ff2448-cp38-cp38-win_amd64.whl (3.4 MB)
|████████████████████████████████| 3.4 MB 6.4 MB/s
Requirement already satisfied: numpy>=1.17.3 in c:\users\drojf\appdata\local\programs\python\python38\lib\site-packages (from opencv-python==4.2.0.34->-r requirements.txt (line 1)) (1.19.3)
Installing collected packages: depthai
Attempting uninstall: depthai
Found existing installation: depthai 0.0.2.1+57205e4dad905895090ef51237deea0905390e66
Uninstalling depthai-0.0.2.1+57205e4dad905895090ef51237deea0905390e66:
Successfully uninstalled depthai-0.0.2.1+57205e4dad905895090ef51237deea0905390e66
Successfully installed depthai-0.0.2.1+6974a181509ca15bfb4fbb57bffbdecf87ff2448
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python main.py -cam
Loading pipeline...
Creating pipeline...
Creating Color Camera...
Traceback (most recent call last):
File "main.py", line 327, in <module>
Main(camera=args.camera).run()
File "main.py", line 103, in __init__
self.create_pipeline()
File "main.py", line 117, in create_pipeline
cam.setBoardSocket(depthai.CameraBoardSocket.RGB)
AttributeError: 'depthai.ColorCamera' object has no attribute 'setBoardSocket'
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python main.py -cam
Loading pipeline...
Creating pipeline...
Creating Color Camera...
Traceback (most recent call last):
File "main.py", line 327, in <module>
Main(camera=args.camera).run()
File "main.py", line 103, in __init__
self.create_pipeline()
File "main.py", line 117, in create_pipeline
cam.setBoardSocket(depthai.CameraBoardSocket.RGB)
AttributeError: 'depthai.ColorCamera' object has no attribute 'setBoardSocket'
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python main.py
Traceback (most recent call last):
File "main.py", line 20, in <module>
raise ValueError("Missing inference source! Either use \"-cam\" to run on DepthAI camera or \"-vid <path>\" to run on video file")
ValueError: Missing inference source! Either use "-cam" to run on DepthAI camera or "-vid <path>" to run on video file
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python -m pip install -r requirements.txt
Looking in indexes: https://pypi.org/simple, https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/
Ignoring opencv-python: markers 'platform_machine == "armv7l"' don't match your environment
Requirement already satisfied: opencv-python==4.2.0.34 in c:\users\drojf\appdata\local\programs\python\python38\lib\site-packages (from -r requirements.txt (line 1)) (4.2.0.34)
Collecting depthai==0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
Using cached https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/depthai/depthai-0.0.2.1%2Bb9918c481abaaeac51dd1d2b80fe6a150612f90a-cp38-cp38-win_amd64.whl (4.1 MB)
Requirement already satisfied: numpy>=1.17.3 in c:\users\drojf\appdata\local\programs\python\python38\lib\site-packages (from opencv-python==4.2.0.34->-r requirements.txt (line 1)) (1.19.3)
Installing collected packages: depthai
Attempting uninstall: depthai
Found existing installation: depthai 0.0.2.1+6974a181509ca15bfb4fbb57bffbdecf87ff2448
Uninstalling depthai-0.0.2.1+6974a181509ca15bfb4fbb57bffbdecf87ff2448:
Successfully uninstalled depthai-0.0.2.1+6974a181509ca15bfb4fbb57bffbdecf87ff2448
Successfully installed depthai-0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python main.py
Traceback (most recent call last):
File "main.py", line 20, in <module>
raise ValueError("Missing inference source! Either use \"-cam\" to run on DepthAI camera or \"-vid <path>\" to run on video file")
ValueError: Missing inference source! Either use "-cam" to run on DepthAI camera or "-vid <path>" to run on video file
C:\drojf\large_projects\depthai-experiments\gaze-estimation>python main.py -cam
Loading pipeline...
Creating pipeline...
Creating Color Camera...
Creating Face Detection Neural Network...
Creating Landmarks Detection Neural Network...
Creating Head Pose Neural Network...
Creating Gaze Estimation Neural Network...
Pipeline created.
Starting pipeline...
[ 0.32177734 0.17346191 -0.76708984]
[ 0.22729492 0.20056152 -0.78369141]
[ 0.31567383 0.19384766 -0.7578125 ]
[ 0.30859375 0.17712402 -0.76904297]
[ 0.32348633 0.1986084 -0.75585938]
[ 0.17919922 0.20678711 -0.79394531]
[ 0.33325195 0.20251465 -0.74902344]
[ 0.31176758 0.18896484 -0.76611328]
[-0.19824219 0.18884277 -0.765625 ]
[ 0.35986328 0.16918945 -0.74951172]
[ 0.53417969 0.25708008 -0.66992188]
[ 0.51660156 0.22888184 -0.71240234]
[ 0.17724609 0.13964844 -0.76220703]
[ 0.14807129 0.11236572 -0.78857422]
[ 0.16955566 0.14672852 -0.76757812]
[ 0.18383789 0.15661621 -0.76806641]
[ 0.21948242 0.13146973 -0.77148438]
[ 0.23303223 0.15686035 -0.75341797]
[ 0.27978516 0.1550293 -0.75048828]
[ 0.30688477 0.17773438 -0.73925781]
[ 0.2442627 0.15258789 -0.78320312]
[ 0.36425781 0.19262695 -0.72998047]
[ 0.35302734 0.1706543 -0.74316406]
[ 0.32836914 0.1673584 -0.75292969]
[ 0.33325195 0.1895752 -0.74121094]
[ 0.36108398 0.24731445 -0.70410156]
[ 0.2442627 0.23608398 -0.75146484]
[ 0.26733398 0.1940918 -0.75927734]
[ 0.42578125 0.19616699 -0.70361328]
[ 0.42724609 0.18994141 -0.70361328]
[ 0.27368164 0.21777344 -0.75097656]
[ 0.35717773 0.16137695 -0.74658203]
[ 0.16296387 0.22290039 -0.78369141]
[ 0.34765625 0.22338867 -0.72949219]
[ 0.16638184 0.24047852 -0.7734375 ]
[ 0.29541016 0.23620605 -0.73144531]
[ 0.33129883 0.17785645 -0.75830078]
[ 0.30419922 0.2244873 -0.74365234]
[ 0.32714844 0.22192383 -0.73486328]
[ 0.30786133 0.17028809 -0.77246094]
[ 0.25146484 0.20751953 -0.76074219]
[ 0.21520996 0.20446777 -0.77587891]
[ 0.31469727 0.17651367 -0.77050781]
[ 0.3581543 0.20166016 -0.73925781]
[ 0.3137207 0.24682617 -0.72998047]
[ 0.17871094 0.22033691 -0.78027344]
[ 0.1541748 0.2166748 -0.78613281]
[ 0.13549805 0.22253418 -0.78710938]
[ 0.25073242 0.21691895 -0.75244141]
[ 0.26074219 0.22265625 -0.75634766]
[ 0.24597168 0.22338867 -0.76220703]
[ 0.30664062 0.17614746 -0.77197266]
[ 0.21911621 0.17150879 -0.79248047]
[ 0.35424805 0.20422363 -0.73974609]
[ 0.26806641 0.22851562 -0.73339844]
[ 0.22351074 0.2512207 -0.75537109]
[ 0.39819336 0.17724609 -0.73388672]
[ 0.15759277 0.19836426 -0.80078125]
[ 0.21728516 0.234375 -0.76757812]
[ 0.3503418 0.18164062 -0.76220703]
[ 0.36303711 0.21203613 -0.72021484]
[ 0.38500977 0.24291992 -0.70556641]
Traceback (most recent call last):
File "main.py", line 327, in <module>
Main(camera=args.camera).run()
File "main.py", line 319, in run
self.run_camera()
File "main.py", line 310, in run_camera
self.parse()
File "main.py", line 288, in parse
if cv2.waitKey(1) == ord('q'):
KeyboardInterrupt
C:\drojf\large_projects\depthai-experiments\gaze-estimation>
from depthai-experiments.
@kurisutofu yes, this is the first example we had of gen2 actually running, so it lacks optimizations we developed when working with new experiments.
It will be updated soon, and probably will need adjustments also in the future, since our API will constantly be upgraded.
Just recently, I've updated the predestrian reid example (#34), and we're trying to keep our gen2 examples (here) updated, so if you're looking for more optimized code examples, feel free to check these links
from depthai-experiments.
In my case I was running depthai inside docker. Looks like udev support for libusb needs to be disabled in this case with ./configure --disable-udev as done in the luxonis Dockerfile
from depthai-experiments.
Hi @kurisutofu .
We currently have 2 incompatible depthai versions. Gen1 and upcoming gen2 (which will be versioned as > 0.5)
I suggest using virtual environment in case of trying out depthai-demo and old vs new (gen2) examples.
As for the error, it seems like you are running an older (gen1) depthai library. Can you try installing the requirements as specified in gaze-estimation
python3 -m pip install -r requirements.txt
from depthai-experiments.
Thanks for the update @drojf . Very curious.
from depthai-experiments.
Hi @kurisutofu .
We currently have 2 incompatible depthai versions. Gen1 and upcoming gen2 (which will be versioned as > 0.5)
I suggest using virtual environment in case of trying out depthai-demo and old vs new (gen2) examples.As for the error, it seems like you are running an older (gen1) depthai library. Can you try installing the requirements as specified in gaze-estimation
python3 -m pip install -r requirements.txt
I had tried already installing the requirement but I was in the same virtual environment as the dephAi demo.
I will try again and will update.
from depthai-experiments.
I forgot to mention I'm running the scripts on the rapsberry pi 4.
I tried again and I got the same error, even in a separate virtual environment.
I compared the requirement file with what @drojf had and I had an older depthai version so I tried the same but it didn't work.
Same error.
However, after checking git, I saw I was not using the latest files anymore so did a pull and installed the requirements again.
Here are the logs:
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple, https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/
Ignoring opencv-python: markers 'platform_machine != "armv7l"' don't match your environment
Requirement already satisfied: opencv-python==4.1.0.25 in /home/pi/Documents/scripts/gaze/lib/python3.7/site-packages (from -r requirements.txt (line 2)) (4.1.0.25)
Collecting depthai==0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
Using cached https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local/depthai/depthai-0.0.2.1%2Bb9918c481abaaeac51dd1d2b80fe6a150612f90a-cp37-cp37m-linux_armv7l.whl (5.4 MB)
Requirement already satisfied: numpy>=1.16.2 in /home/pi/Documents/scripts/gaze/lib/python3.7/site-packages (from opencv-python==4.1.0.25->-r requirements.txt (line 2)) (1.19.5)
Installing collected packages: depthai
Attempting uninstall: depthai
Found existing installation: depthai 0.0.2.1+6974a181509ca15bfb4fbb57bffbdecf87ff2448
Uninstalling depthai-0.0.2.1+6974a181509ca15bfb4fbb57bffbdecf87ff2448:
Successfully uninstalled depthai-0.0.2.1+6974a181509ca15bfb4fbb57bffbdecf87ff2448
Successfully installed depthai-0.0.2.1+b9918c481abaaeac51dd1d2b80fe6a150612f90a
After trying again, this time, I get the following:
Loading pipeline...
Creating pipeline...
Creating Face Detection Neural Network...
Creating Landmarks Detection Neural Network...
Creating Head Pose Neural Network...
Creating Gaze Estimation Neural Network...
Pipeline created.
terminate called without an active exception
Aborted
Any idea what I could do?
from depthai-experiments.
Sorry about the delay here. Will pull @VanDavv in for help, as he wrote this example.
from depthai-experiments.
Hi @kurisutofu
I replaced Gen2 library versions in there examples to use the same one (related PR)
Tested on new virtualenvs both on Manjaro (PC), Ubuntu (PC) and Raspberry OS (RPi 3B+) and they all work - could you try the failing examples again?
And before installing dependencies in your environment, could you run there commands first
python3 -m pip uninstall -y depthai
python3 -m pip install -U pip
And then install requirements using
python3 -m pip install -r requirements.txt
from depthai-experiments.
Hi @VanDavv ,
Thanks for your help.
I uninstalled as you said, then I did a pull and installed again.
This worked, thank you!
However, it's very slow on the raspberry pi 4.
What's your experience with it? Was it really slow for you too?
I'm talking really slow. Very sluggish and a few seconds delay.
I can look at the camera, wait, then look at my pc and I see in the video my head sluggishly moving to look at the camera so I'd say there is a 3-5s delay and the video in between is very sluggish.
from depthai-experiments.
@VanDavv ,
Thanks for your reply.
I will check those optimizations but I'm still wrapping my head around how this all works so I feel that you'll have optimized it before I fully understand how this works ;)
from depthai-experiments.
Related Issues (20)
- To add mesh generation for gen2-pointcloud and Multiple camera HOT 2
- How to visualize when I record data with gen2-record-replay?
- Why pylance is complaining about NNData(), node, and ImageManipConfig() call in script.py from gen2-gaze-estimation project?(Solved) HOT 2
- Head posture estimation module HOT 2
- segmentation with yolov5
- Head pose estimation HOT 2
- How to load external video or webcam feed and process it on device side HOT 1
- New recommendations on head pose estimation model. HOT 1
- Support for YOLOP HOT 2
- Depth information in deep learning model HOT 3
- Camera extrinsic parameter HOT 1
- Issue with installing requirements for RTSP streaming HOT 1
- Deploy yolov8 on OAK-D HOT 6
- Challenges Installing PyGObject for OKA Camera RTSP Streaming HOT 1
- Can we specify the layers you are interested in for a custom nn ? HOT 8
- Yolo v8 on OAK-D camera HOT 1
- gen2-pedestrian-reidentification freezes while person is detected HOT 3
- Yolov8 on OAK-1 using depthai_sdk HOT 3
- cannot import name 'realsense_msgs__msg__StreamInfo' in record.py HOT 5
- gen2-pose-estimation
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from depthai-experiments.