ERROR about packet_forwarder HOT 4 CLOSED

If you're using a Kerlink GW, in the shell try
modem_on
And them press tab for autocomplete. The upcoming script if you run it, will start the modem on the Kerlink GW.
This could be one of the issues. Let us know

from packet_forwarder.

No actually I'm using a Raspberry 3 and trying to find where the GPIO is used in the code to see if it's compatible.

Thanks for your answer

from packet_forwarder.

Np.
If you're going through the code for the packet forwarder, make sure to check the for another project called LoRa gateway from the same developer (Semtech). Most of the packet forwarder stuff are actually are hidden there, and packet forwarder needs the LoRa gateway code to compile.
https://github.com/Lora-net

I haven't done anything outside of Kerlink and Multitech gateways so that's just a hint.

from packet_forwarder.

Hello @verogeorl,

Which version of the gateway board do you have?
If you are using a v1.0 (the one without a FPGA), you need to reset the SX1301 before launching the packet forwarder.
This can be done using the script reset_lgw.sh provided with the HAL (Lora-net/lora_gateway).

Please also send the wiring you are using between the RPi and the gateway board.

Regards

from packet_forwarder.