PICSimLab Not responding about picsimlab HOT 3 CLOSED

I Fix it ✅

The problems root was from com0com drivers on my laptop so I updated all of them then launch Com0com and put COM1 (or any available port) in Tera Term -> New connection -> Serial -> port, and another port like COM2 on CuteCom in PICSimLab -> Tools -> Serial Terminal and that fixes the issue, Thanks for helping.

note: after installing com0c0m and launch it my laptop keeps showing that I need to install Microsoft .NET v2.0 or higher to show. however, I already installed the last version so I fixed this by:

1. Control panel -> Turn windows features on or off.

2. Turn on .NET Framework (include 2.0 or higher).

3. Return to com0com and configure it.

Finally the project working.

from picsimlab.

Hi @rayhan-shhadeh ,

This error is related to the OpenAL library used for audio support for PICSimLab. A common problem that causes PICSimLab to freeze is using serial communication with a com0com port without correctly configuring it. If this is the case, connect a serial terminal to the other port of com0com and the PICSimLab will work again.

from picsimlab.

Actually that's true, I'm using tera term for serial and another bootloader software ( originally for our uni ) that checks for available ports and make the connection to read last byte in memory then upload the code to a hardware basic circuit contains PIC18F4620, my question is how to configure com0com port correctly?

from picsimlab.