Abount Hardware,such as camera about deepracer-pi HOT 2 CLOSED

I have added a Raspberry Pi Camera v2 on mine; it is almost better fitting (more resembling the picture in the simulator) than the one in the original car. The importance is the horizontal field-of-view (60 degrees); and the position (height over track, 15 degrees tilt forward and position ahead of the front tires). You might see some 3d print instructions to fit it onto the WLToys A949, A959, A979 later.

You don't really need any specific cables; but the Servo Hat from Waveshare would be needed. (It is the interface between RPi and the Servo/ESC.)

from deepracer-pi.

Closing as no further discussion.

from deepracer-pi.