Hardware Hack - more powerful 28BYJ-48 - necessary code modification about xblinds HOT 3 CLOSED

@spitzlbergerj, I actually don't think it would need code modification. The L293D is also controlled by 4 pins as I'm using for the ULN2003, so it should just be a matter of wiring it up in the right sequence...

Defining code used in xBlinds for the AccelStepper library:

#define motorPin1 D1 // IN1 on the ULN2003 driver
#define motorPin2 D2 // IN2 on the ULN2003 driver
#define motorPin3 D3 // IN3 on the ULN2003 driver
#define motorPin4 D4 // IN4 on the ULN2003 driver
#define STEPS 2048
#define MotorInterfaceType 8

AccelStepper stepper = AccelStepper(AccelStepper::FULL4WIRE, motorPin1, motorPin3, motorPin2, motorPin4);

from xblinds.

Hi,
OK, thanks for pointing that out. I am waiting for the components and will try. After that I will describe my procedure and send you a pull request for a readme change if it works

from xblinds.

Hi, OK, thanks for pointing that out. I am waiting for the components and will try. After that I will describe my procedure and send you a pull request for a readme change if it works

Hi, did you ever manage to do this, if so I would like to know what it takes?

from xblinds.