Comments (35)
Typical crash from an unsupported device.
Please use the following instructions :
[NewHardwareSupportRequest] to make me possible to build for this specific ROM.
Thanks in advance
Original comment by [email protected]
on 14 Apr 2010 at 12:26
- Changed state: Accepted
from csipsimple.
I've followed those instructions, but the other app force-closes too. I
attached the log.
It may be related to my CPU, which is armv4 (some libs aren't supported, that's
why
some apps like Sipdroid don't work).
Original comment by [email protected]
on 18 Apr 2010 at 5:38
Attachments:
from csipsimple.
Sorry, there where a mistake in MediaGetLib.apk for android 1.5. I've just
fixed it.
You can try to run the new version.
I hope it will fix the problem for you (i'm not really confident in the way .so
are
attached - as application/binary, I hope that android 1.5 email application
consider
this type as a valid attachement for emails).
If it still doesn't work, i'll write an alternate solution on the wiki based on
the
SDK (
adb pull /system/lib/libmedia.so .
adb pull /system/lib/libcutils.so .
adb pull /system/lib/libutils.so .
).
For the cpu, I think that, since it's ARM architecture, it will work once I will
re-build for your phone media libs.
Besides, I think that sipdroid is not compliant with android 1.5, my app should
be (I
have tested it with the phone of a collegue under android 1.5). Unfortunately
from a
SDK point of view make an app compatible with android 1.5 is not really trivial
and
there is a big gap between 1.5 and 1.6. So I guess that sipdroid devs had
decided to
not support this sdk. But I think that there is still a lot of user that are
using
1.5, so I'll try to support it as long as it will be possible.
Thanks
Original comment by [email protected]
on 18 Apr 2010 at 6:36
- Added labels: Priority-High
- Removed labels: Priority-Medium
from csipsimple.
It is still crashing. I attached the log again.
I attached those libraries too.
Original comment by [email protected]
on 18 Apr 2010 at 9:57
Attachments:
from csipsimple.
Many thanks for the libs. It's exactly what I need to make the build.
I attached a version of the application (with a bundled native lib compiled for
your
device). You'll need to uninstall previously installed version.
If everything is ok, the application should start without trying to download
anything
and without crashing. If it redirects you to the wiki page, your guess was
right,
there is an issue with the CPU version, and I fear that it will be really
difficult
to support this kind of device.
I'll look closer the problem with MediaGetLib and android 1.5. (I'll open a new
issue
for this).
Original comment by [email protected]
on 19 Apr 2010 at 8:08
Attachments:
from csipsimple.
Thanks for your tries, but unfortunately it still crashes. ;(
It didn't try to download anything though, as expected. It simply launches with
a
black screen, then crashed a few seconds after.
I attached the log again.
Original comment by [email protected]
on 20 Apr 2010 at 9:52
Attachments:
from csipsimple.
Bad news :(.
As you suspected, it's probably a problem with armv4.
I've just found a webpage which deals with this kind of issue
(http://benno.id.au/blog/2008/10/27/android-on-armv4-take2). (There is also
other
references that announces that armv4 is unfortunately not supported by NDK
(native
developpement toolkit). :(
So i'll try to follow instructions given by benno on his website. It may take
some
times because I've to modify the NDK once again to merge benno's changes and my
changes.
It will take me time. So stay tuned, but i'll not submit you a fix until
several weeks.
Once again, many many thanks for all the time you spent testing the app and I
hope
that my next try will be the good one :).
Original comment by [email protected]
on 21 Apr 2010 at 6:35
- Added labels: Priority-Low
- Removed labels: Priority-High
from csipsimple.
It progresses : I've already modified the NDK to be able to build using ARMv4
instructions.
I have now to retrieve the dynamic libs for amrv4 (some of the .so included in
the
system) and the headers used for armv4 android builds. However, I can yet
provide a
library built for armv4 but I'm not 100% sure it's binary compatible for the
other
armv4 libs. I'll post soon the package I already have (but i'm not confident in
it).
Original comment by [email protected]
on 10 May 2010 at 6:06
- Changed title: ARMv4 support
from csipsimple.
Do you need any file from my Android system ?
Original comment by [email protected]
on 20 May 2010 at 12:26
from csipsimple.
You can try the attached apk.
If you are able to launch the application and that the app doesn't send you to
the
wiki page it will be a really a good news.
Else I'll need all the .so that are in the /system/lib of your phone. (and if
you can
also send me the stack trace given by logcat)
Thanks in advance
Original comment by [email protected]
on 20 May 2010 at 9:50
Attachments:
from csipsimple.
I have just installed the apk from comment 10.
The application now starts and at some point I was even able to see the next
screen
after hitting the add button, where one can choose the type of account.
Thereafter it
kept closing and restarting. I am running this on my openmoko freerunner and I
have
attached the logcat.
If there is any other way I can help, please let me know.
Original comment by [email protected]
on 21 May 2010 at 8:08
Attachments:
from csipsimple.
Great, many thanks for the test.
It fails really early when it calls the native lib but the stack trace attached
explains me why. There is still things I have to modify on the NDK to get it
work
with armv4 (re-build the toolchain for armv4) (at least for armv4 since it
appears to
be different from armv4T - so for the robot it's still worth to try maybe the
failure
doesn't appear so quickly that it appears on the Neo Freerunner).
I'll also try to see if it couldn't be directly built using the openmoko android
portage source (it could be easier than use a ported NDK in a first time) (and I
guess this portage is open-sourced).
Original comment by [email protected]
on 21 May 2010 at 11:00
from csipsimple.
Thanks for the file, I tried it and got something like #11 described.
However I went further in the tests. I tried 2 things.
The first time, I enabled Wifi and I was connected to my personal network. The
app
launches, BUT it crashes many, many times, well, it never ends crashing every
few
seconds. Those crashes don't bring home screen back, they just make the screen
black
for a few seconds, the notifications bar remains visible though. If I'm fast
and if I
get lucky, I can hit "Add account", then I'm being asked to choose between a few
wizards, however hitting one of those wizards does not work, it does nothing
and the
next crash occurs quickly. I attached a (big) log named CSipSimpleWifi.txt for
this.
Then, I tried disabling Wifi. SAME RESULT so I won't talk about this.
Then, the "true" second time, I rebooted the phone without enabling the Wifi.
When
launching CSipSimple, I'm getting a little message saying I'm not connected to
any
network ("The Robot" / "Sciphone N19" / TA1 doesn't have 3G and I don't need
it, and
I didn't enable GPRS of course :] ), and I can hit "Add account" ; the app
seems to
work. However, when I try to hit any wizard, the app FORCE CLOSES (and
restarts). But
if I do nothing at all except launching the app, I'm getting no crash at all. I
attached a log named CSipSimpleNoWifi.txt for this.
Finally, I pulled by .so files as you asked, all is in the .zip file attached.
:)
Original comment by [email protected]
on 22 May 2010 at 12:09
Attachments:
from csipsimple.
I just wanted to state that I have the same issues as #13 with
enabling/disabling
wifi which makes quite a difference when the program crashes.
I thought the neo freerunner was armv4t (I dont quite know what the difference
is
between armv4 and armv4t but I know that on the navit site for android they
point the
freerunner users to:
http://download.navit-project.org/navit/android_armv4t/svn/)
Best regards and again a lot of thanks for your efforts!!!
Original comment by [email protected]
on 22 May 2010 at 5:39
from csipsimple.
There is significant progress on this point !
http://code.google.com/p/android-on-freerunner/issues/detail?id=142#c11
Henri (comment 11 on the above post), found a way to use NDK for armv4t ! He
even succeed in building and running CSipSimple on a freerunner :D
http://code.google.com/p/csipsimple/downloads/detail?name=CSipSimple_0.00-13-arm
v4t.apk
Will be fine for armv4*T* . I don't know if it will works form armv4 (I don't
really know what are the difference between the two cpu). So for armv4 owners
(sciphone) worth to try with this one.
Original comment by [email protected]
on 2 Oct 2010 at 9:43
from csipsimple.
Well, I just bought a Galaxy NAOS. :p
I damaged something on my Sciphone hardware recently. But I could fix it and
try the new version of your app for armv4(T) devices, IT DOES WORK.
(I have no sound when I call (with Freephonie) but this occurs with the NAOS
too, and the app is sometimes slow but this is because of the bad processor of
the Sciphone)
Your replacement app does execute on armv4(T) devices. If you publish it on the
Market, I guess you can close this ticket.
Original comment by [email protected]
on 5 Oct 2010 at 6:21
from csipsimple.
@anonymous : really good news that it works with your sciphone too :).
You can send me a direct mail about your problem with sound. I guess that's a
problem with either the network or the configuration. But as it could also be a
problem with audio layer worth to ensure there is not something wrong.
I know that on android Q8 a clone of sciphone there is something wrong with
audio micro... so still some issues to check to ensure it's good.
Original comment by [email protected]
on 5 Oct 2010 at 10:05
from csipsimple.
the arm4t also works very nicely with the openmoko freerunner. Automatically
reregisters as soon as wifi is present.
The audio quality (with sipgate as provider) is fine and goes both ways. If you
have any suggestions on how to acchieve full echo cancellation and a smaller
latency please let me know. Thanks again for all your hard work!!!
Original comment by [email protected]
on 5 Oct 2010 at 8:42
from csipsimple.
the arm4t also works very nicely with the openmoko freerunner. Automatically
reregisters as soon as wifi is present.
The audio quality (with sipgate as provider) is fine and goes both ways. If you
have any suggestions on how to acchieve full echo cancellation and a smaller
latency please let me know. Thanks again for all your hard work!!!
Original comment by [email protected]
on 5 Oct 2010 at 8:42
from csipsimple.
the arm4t also works very nicely with the openmoko freerunner. Automatically
reregisters as soon as wifi is present.
The audio quality (with sipgate as provider) is fine and goes both ways. If you
have any suggestions on how to acchieve full echo cancellation and a smaller
latency please let me know. Thanks again for all your hard work!!!
Original comment by [email protected]
on 5 Oct 2010 at 8:43
from csipsimple.
Well, for latency I guess that's due to the hardware limits - you could try to
change the codecs to force PCMU/PCMA (known to consume less cpu than others).
You could also try to change clockrate/frequency (change between 16kHz & 8kHz :
8kHz will consume less CPU but increase latency, 16kHz latency will be twice
lower but cpu will be more loaded)
It could also be due to the audio implementation of the phone.
And finally, there is maybe also optimization that I could try in the lib but
could take time to find out what is the good settings for a particular phone.
I've already done some pass on these settings during an optimization pass. But
maybe could be tweaked for a particular device/architecture.
To complete to fix this bug and be able to distribute it I actually do for the
market version, I'll need more info about the phone.
In fact, when the app starts the first time it download on the web the library
that match the more its capabilities. For that I use system properties. So I'll
need these properties to determine that your phone need this version of the lib
(I didn't found any way to know the CPU arch from android, so I suppose that
I'll have to use model or build.
So If you can install on your phone DeviceInfo (or some application that
collect infos from the device) and send it to me would be nice :)
Thx in advance
Original comment by [email protected]
on 9 Oct 2010 at 11:13
- Changed state: Started
from csipsimple.
Hi,
I have tried to find DeviceInfo, but haven't succeeded. Do you know the
developers homepage or an apk I can download and run to give you the necessary
information. I also tried sysinfo-for-android, but unfortunately it doesn't
build on the fone as the sdk is too old.
Original comment by [email protected]
on 9 Oct 2010 at 7:46
from csipsimple.
Yes I forgot that, its probably not compatible with 1.5 (that's a shame since
supporting 1.5 is not so hard).
If you have an adb access (I mean the android sdk installed) on your phone the
easiest way is to type:
adb shell getprop
or
adb.exe shell getprop (if you are on windows)
in a shell/command
And send me the result of the command. (I'm more interested in first entries
ro.product.*
If you have no adb access, let me know and I'll write a little program to
collect these infos (could be a good starting point for a feature that embed a
bug report tool).
Original comment by [email protected]
on 9 Oct 2010 at 7:58
from csipsimple.
Hi,
adb shell getprop worked. See file attached.
Original comment by [email protected]
on 10 Oct 2010 at 8:36
Attachments:
from csipsimple.
Well, sorry but I bricked my old Android, I may get get it functional one day,
but not now... ^^
I can't try anything now, though. Including CSipSimple.
Original comment by [email protected]
on 17 Oct 2010 at 9:49
from csipsimple.
will the future releases (from 0.13 onwards) also have an arm4t version to
download?
v0.15 (no armv4t extension) doesn't work on the freerunner, the v0.13armv4t
works
Original comment by [email protected]
on 19 Oct 2010 at 7:24
from csipsimple.
In theory, if you uninstall dev version. And install the one from the market.
(Or 0.00-15 (not 0.00-15-01 : devs version have bundled .so files). It ~should~
download the library from the good place at first startup if you are on a
freerunner (thanks to the device id you provided me in last comment).
But you must uninstall dev version before doing that. Else it will remain
trying to load the old bundled armv4 version which is not compatible anymore
with the java code.
In fact, on the market version, at startup (and upgrades), it check this file :
http://code.google.com/p/csipsimple/source/browse/trunk/pjsip_android/update.jso
n
Look for the first matching library, download it and load it.
If there is a dev version previously installed (and not uninstalled), the
native taken is the one available in a specific directory I use for devs
version (to avoid this heavy process of downloading the lib). However this
process is (should be if it work) really cool for armv4 support ... since
market version should be compatible will all devices (armv4, armv5/6 and armv7
and in the future probably also x86)
Let me know if uninstalling and installing the market version makes things
better. Else I'll ask you to help me to understand why it is not downloading
the good version of the lib ;).
Original comment by [email protected]
on 19 Oct 2010 at 7:58
from csipsimple.
So if I understand you correctly my
"adb install -r CSipSimple_0.00-15.apk" is conflicting with the old 13armv4t
version. So each time I should first remove the app from the phone, before
reinstalling the new version? Unfortunately the freerunner has no market
support so I can only use the "apks" you provide in "downloads". Therefore my
question is it fine to:
a) uninstall previous Csipsimple from phone
b) dowload your CSipSimple_0.00-15.apk
c) do .adb install CSipSimple_0.00-15.apk
d) reconfigure the Csipsimple with the correct provider infos?
Original comment by [email protected]
on 19 Oct 2010 at 11:43
from csipsimple.
Yes,
However for next installs, you'll be able to just update the markets version
and it will be fine.
In the future, you must never try a dev version (0.00-xx-xx) but always 0.00-xx
version (which doesn't have the .so inside).
So for 0.00-16.. you'll just need adb install -r CSipSimple_0.00-16.apk. And
you'll not need to reconfigure everything (nor uninstall previously installed
version).
Reinstall is just needed when switch from a dev version (0.00-xx-xx) to a
"market" version 0.00-xx. (Or from 0.00-xx to 0.00-xx-xx)
In fact when I say market version it's just a production version (that is not
debuggable and doesn't have .so files inside).
Original comment by [email protected]
on 19 Oct 2010 at 11:57
from csipsimple.
Thanks for the explanation! all makes sense now. I will give it a try later
today.
Please keep the "apks" also here in the future on your site for download, as
others may also need the apks directly as I do with the freerunner not having
access to market. Thanks for the work again!
Original comment by [email protected]
on 20 Oct 2010 at 7:53
from csipsimple.
Yes yes don't worry,
It would make non sense for an opensource project to distribute it only through
the android market (which is a closed mean of distribution).
I'll try to distribute CSipSimple by all possible ways.
I do opensource, libre and with a good (I enforce to) ethic distribution and
contributions.
I do this precision cause, I'm a little bit afraid of the current debate
between Google and Apple about "openness" of their stuff... They don't seems to
make the difference between opensource, 'libre' and ethic which are three
really different things !
CSipSimple like Firefox is Opensource, Libre and Ethic
Android is Opensource and Libre - the ethic of contributions and distribution
made by Google of the project can be discussed
And iOS is not opensource, not libre... and I'll just avoid to talk about their
ethic standards...
So yes, distribution of CSipSimple will remain ethic, and I'll also enforce to
welcome all contributions to the projects if contributions make sense.
Sorry for the little digression, but I was discussing this morning with apple
fanboys I work with about recent declaration of Andy Rubin and Steve Jobs about
openess of android... And was amazed to see that the two CEO and also my
colleagues doesn't really understand the diffs between software licences,
project distributions and projects contributions.
Original comment by [email protected]
on 20 Oct 2010 at 8:41
from csipsimple.
Hi
I tried the new 0.00-15 after uninstalling any previous version of csipsimple.
It starts fine, tries to download something, but then crashes. Restarting the
phone and starting Csipsimple doesn't work.
I reinstalled the 0.00-13armv4t version. That one works just fine. Any ideas?
I attached the logcat, hope that helps.
Original comment by [email protected]
on 21 Oct 2010 at 8:26
Attachments:
from csipsimple.
It seems to have downloaded the good version of the library.
Maybe I did something wrong when I built the armv4 version (I maybe forgot to
do make clean before building).
I'll try to do a private build that I'll send you by mail to check another
version of the library. I'll do that tomorrow, if I forgot, don't hesitate to
ask me again ;).
Original comment by [email protected]
on 21 Oct 2010 at 10:02
from csipsimple.
Ok I've forgotten, shame on me :S.
Well anyway, good news for those how want to keep up to date with ARMv4t
support :
http://nightlies.csipsimple.com/armv4t/
(Builds each night if needed @5:01 CET)
If you want me to freeze some revision and publish it to the download section
of this website, just ask me.
Original comment by [email protected]
on 6 Dec 2010 at 1:29
from csipsimple.
Marked as fixed. But if you encounter problems with nightly builds let me know.
Original comment by [email protected]
on 20 Dec 2010 at 11:20
- Changed state: Fixed
from csipsimple.
Related Issues (20)
- PSP Wifi mode : Sound becomes choppy/garbled when the phone goes to sleep in mid-call HOT 22
- After SIP call, next GSM call starts in "Loudspeaker" mode HOT 4
- sip outgoing only - result crash when dialing HOT 2
- Ability to put call on HOLD HOT 3
- Register timeout always reverts to 15 sec (Expert account wizard) HOT 15
- Keep-Alive Interval always reverts to blank (0) HOT 1
- Expert wizard: Data Type not initialized with account DB value HOT 12
- pre5 - Cannot disable or change Keep-Alive HOT 8
- Cannot erase Proxy URI field once it has been filled in HOT 2
- Enhancement: Account wizard for Callcentric HOT 5
- Battery consumption HOT 143
- Micro / Speaker booster option HOT 1
- Cannot dial USSD codes while CSipSimple installed HOT 19
- new account HOT 2
- Phone calls do not pause media HOT 30
- No audio / Poor audio on Nexus One HOT 15
- Account Status Labels - More Descriptive and Localizable HOT 3
- Account name not shown on X10 Mini HOT 9
- [Manufacturer driver] Echo on Xperia X10 HOT 16
- Connect to SIP provider only on specific WiFi network
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from csipsimple.