Comments (35)
翻了也打不开,用了美国和新加坡的,都打不开,反正你已经编译好了, 此贴也可以close 了.
from small.
是Password里面的那个xray? 我刚试了能编译的.
from small.
是Password里面的那个xray? 我刚试了能编译的.
正是啊
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
from small.
我是用這方法的
https://github.com/kenzok8/openwrt-packages
2、 或者添加下面代码到 openwrt 或lede源码根目录feeds.conf.default文件
src-git kenzo https://github.com/kenzok8/openwrt-packages
3、 passwall依赖
src-git small https://github.com/kenzok8/small
from small.
剛再重新编译
Installing package 'luci-app-gost' from kenzo
Installing package 'luci-app-openclash' from kenzo
Installing package 'luci-app-passwall' from kenzo
Installing package 'brook' from small
Installing package 'luci-app-smartdns' from kenzo
Installing package 'luci-app-ssr-plus' from kenzo
WARNING: No feed for package 'shadowsocksr-libev-ssr-redir' found
WARNING: No feed for package 'shadowsocksr-libev-ssr-server' found
Installing package 'luci-app-vssr' from kenzo
WARNING: No feed for package 'shadowsocksr-libev-ssr-redir' found
Installing package 'xray-plugin' from small
WARNING: No feed for package 'shadowsocksr-libev-ssr-server' found
Installing package 'luci-theme-argon_new' from kenzo
Installing package 'luci-theme-atmaterial' from kenzo
Installing package 'luci-theme-edge' from kenzo
Installing package 'luci-theme-ifit' from kenzo
Installing package 'luci-theme-opentomato' from kenzo
Installing package 'luci-theme-opentomcat' from kenzo
Installing package 'luci-theme-opentopd' from kenzo
Installing all packages from feed small.
Installing package 'openssl1.1' from small
Installing package 'ssocks' from small
from small.
我十分钟前又重新编了一次,没问题呃
from small.
shadowsocksr-libev-ssr-server 这个别钩上,试试
from small.
这个是我的feeds.conf.default文件:
src-git packages https://github.com/coolsnowwolf/packages
src-git luci https://github.com/coolsnowwolf/luci
src-git routing https://git.openwrt.org/feed/routing.git
src-git telephony https://git.openwrt.org/feed/telephony.git
src-git freifunk https://github.com/freifunk/openwrt-packages.git
#src-git video https://github.com/openwrt/video.git
#src-git targets https://github.com/openwrt/targets.git
#src-git management https://github.com/openwrt-management/packages.git
#src-git oldpackages http://git.openwrt.org/packages.git
#src-link custom /usr/src/openwrt/custom-feed
src-git helloworld https://github.com/fw876/helloworld
src-git kenzo https://github.com/kenzok8/openwrt-packages
src-git small https://github.com/kenzok8/small
from small.
shadowsocksr-libev-ssr-server 这个别钩上,试试
我試了!试是不行!
from small.
这个是我的feeds.conf.default文件:
src-git packages https://github.com/coolsnowwolf/packages
src-git luci https://github.com/coolsnowwolf/luci
src-git routing https://git.openwrt.org/feed/routing.git
src-git telephony https://git.openwrt.org/feed/telephony.git
src-git freifunk https://github.com/freifunk/openwrt-packages.git
#src-git video https://github.com/openwrt/video.git
#src-git targets https://github.com/openwrt/targets.git
#src-git management https://github.com/openwrt-management/packages.git
#src-git oldpackages http://git.openwrt.org/packages.git
#src-link custom /usr/src/openwrt/custom-feed
src-git helloworld https://github.com/fw876/helloworld
src-git kenzo https://github.com/kenzok8/openwrt-packages
src-git small https://github.com/kenzok8/small
我再去试试,谢谢
from small.
这个是我的feeds.conf.default文件:
src-git packages https://github.com/coolsnowwolf/packages
src-git luci https://github.com/coolsnowwolf/luci
src-git routing https://git.openwrt.org/feed/routing.git
src-git telephony https://git.openwrt.org/feed/telephony.git
src-git freifunk https://github.com/freifunk/openwrt-packages.git
#src-git video https://github.com/openwrt/video.git
#src-git targets https://github.com/openwrt/targets.git
#src-git management https://github.com/openwrt-management/packages.git
#src-git oldpackages http://git.openwrt.org/packages.git
#src-link custom /usr/src/openwrt/custom-feed
src-git helloworld https://github.com/fw876/helloworld
src-git kenzo https://github.com/kenzok8/openwrt-packages
src-git small https://github.com/kenzok8/small
Installing package 'trojan-plus' from small
Installing package 'trojan-go' from small
Installing package 'luci-app-clash' from kenzo
Installing package 'luci-app-dnsfilter' from kenzo
Installing package 'luci-app-eqos' from kenzo
Installing package 'luci-app-gost' from kenzo
Installing package 'luci-app-openclash' from kenzo
Installing package 'luci-app-passwall' from kenzo
Installing package 'brook' from small
Installing package 'luci-app-smartdns' from kenzo
Installing package 'luci-app-vssr' from kenzo
WARNING: No feed for package 'shadowsocksr-libev-ssr-redir' found
WARNING: No feed for package 'shadowsocksr-libev-ssr-server' found
Installing package 'luci-theme-argon_new' from kenzo
Installing package 'luci-theme-atmaterial' from kenzo
Installing package 'luci-theme-edge' from kenzo
Installing package 'luci-theme-ifit' from kenzo
Installing package 'luci-theme-opentomato' from kenzo
Installing package 'luci-theme-opentomcat' from kenzo
Installing package 'luci-theme-opentopd' from kenzo
Installing all packages from feed small.
Installing package 'openssl1.1' from small
Installing package 'ssocks' from small
我唯有去取消钩上shadowsocksr-libev-ssr-server吧!
from small.
WARNING: No feed for package 'shadowsocksr-libev-ssr-redir' found,, 这个也取消
报错了.
from small.
WARNING: No feed for package 'shadowsocksr-libev-ssr-redir' found,, 这个也取消
报错了.
a@ubuntu:~/lede$ make menuconfig
Collecting package info: done
WARNING: Makefile 'package/feeds/kenzo/luci-app-bypass/Makefile' has a dependenc y on 'shadowsocksr-libev-ssr-redir', which does not exist
WARNING: Makefile 'package/feeds/kenzo/luci-app-bypass/Makefile' has a dependenc y on 'shadowsocksr-libev-ssr-server', which does not exist
WARNING: Makefile 'package/feeds/kenzo/luci-app-vssr/Makefile' has a dependency on 'shadowsocksr-libev-ssr-redir', which does not exist
WARNING: Makefile 'package/feeds/kenzo/luci-app-vssr/Makefile' has a dependency on 'shadowsocksr-libev-ssr-server', which does not exist
configuration written to .config
*** End of the configuration.
*** Execute 'make' to start the build or try 'make help'.
一樣报错了
from small.
这几个会报错的, 可以正常编译,没关系, bypass 和vssr 这两个luci里面别钩就行了, 不钩也会报,没关系
from small.
这几个会报错的, 可以正常编译,没关系, bypass 和vssr 这两个luci里面别钩就行了, 不钩也会报,没关系
好的,我试试去编译,非常感谢您
from small.
这几个会报错的, 可以正常编译,没关系, bypass 和vssr 这两个luci里面别钩就行了, 不钩也会报,没关系
好的,我试试去编译,非常感谢您
屁大点事
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2
from small.
你钩了哪些?这个你要截图了, 一般只是钩选 passwall , 里面默认就好了.当然还有IPV6的一个助手,我要用Ipv6,你不用可以不钩这个.
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2
你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编译一次,成功后,再钩一个你想要的app, 不要钩太多再编译, 都不知道是哪个钩上出错的
from small.
你钩了哪些?这个你要截图了, 一般只是钩选 passwall , 里面默认就好了.当然还有IPV6的一个助手,我要用Ipv6,你不用可以不钩这个.
我钩选 passwall、ssr-plus、hello world、bypass
之前Xray-core1.2時候沒有問題的
https://upload.cc/i1/2021/03/07/iNkGB7.jpg
https://upload.cc/i1/2021/03/07/W7qQEI.jpg
https://upload.cc/i1/2021/03/07/ksCInA.jpg
https://upload.cc/i1/2021/03/07/cAbVHj.jpg
https://upload.cc/i1/2021/03/07/KmfUra.jpg
https://upload.cc/i1/2021/03/07/B74XIt.jpg
from small.
你钩了哪些?这个你要截图了, 一般只是钩选 passwall , 里面默认就好了.当然还有IPV6的一个助手,我要用Ipv6,你不用可以不钩这个.
我钩选 passwall、ssr-plus、hello world、bypass
之前Xray-core1.2時候沒有問題的
https://upload.cc/i1/2021/03/07/iNkGB7.jpg
https://upload.cc/i1/2021/03/07/W7qQEI.jpg
https://upload.cc/i1/2021/03/07/ksCInA.jpg
https://upload.cc/i1/2021/03/07/cAbVHj.jpg
https://upload.cc/i1/2021/03/07/KmfUra.jpg
https://upload.cc/i1/2021/03/07/B74XIt.jpg
大哥,一个一个的钩,不然错的不好找问题。
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编
你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2
vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题
passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
passwall里面有xray , 一样好用的
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
passwall里面有xray , 一样好用的
yes
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
passwall里面有xray , 一样好用的
yes
大哥,你先去 https://github.com/jerrykuku/luci-app-vssr/issues , 这个地方按他说的
编译
假设你的Lean openwrt(最新版本19.07) 在 lede 目录下
cd lede/package/lean/
git clone https://github.com/jerrykuku/lua-maxminddb.git #git lua-maxminddb 依赖
git clone https://github.com/jerrykuku/luci-app-vssr.git ,
clone克隆下来后,手动复制 /lede/package/lean/luci-app-vssr 下面的几个文件, 这几个文件粘贴到kenzo下面的vssr文件里面替换掉, 明白了吗,不知道kenzo下面vssr在哪里?cd lede/feeds/kenzo/luci-app-vssr.
再退到 lede文件夹下
rm -rf ./tmp && rm -rf .config #清空老缓存与配置文件
./scripts/feeds update -a && ./scripts/feeds install -a #更新feeds清单里的东东
make menuconfig #重新配置, 我钩选中了Passwall与vssy
make -j8 download V=s #下载dl库,其实不知道是否每次编译都要来这么一下,反正我是来了一下
make -j$(($(nproc) + 1)) V=s #以前正常编译过其它版本就这条开始编译了, 线程拉满。否则用下面单线程编译
make -j1 V=s #第一次编译推荐用单线程
我用虚拟机重新安装 了ubuntu,安装 了所有的环境后,昨天晚上挂机成功编译你说的vssy和passwall
对了,忘记提了, https://github.com/jerrykuku/luci-app-vssr/issues
看第7条 建议搭配Argon主题,以达到最佳的显示效果。
我按要求配置时钩选了argon。
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
passwall里面有xray , 一样好用的
yes
大哥,你先去 https://github.com/jerrykuku/luci-app-vssr/issues , 这个地方按他说的
编译
假设你的Lean openwrt(最新版本19.07) 在 lede 目录下cd lede/package/lean/
git clone https://github.com/jerrykuku/lua-maxminddb.git #git lua-maxminddb 依赖
git clone https://github.com/jerrykuku/luci-app-vssr.git ,
clone克隆下来后,手动复制 /lede/package/lean/luci-app-vssr 下面的几个文件, 这几个文件粘贴到kenzo下面的vssr文件里面替换掉, 明白了吗,不知道kenzo下面vssr在哪里?cd lede/feeds/kenzo/luci-app-vssr.
再退到 lede文件夹下
rm -rf ./tmp && rm -rf .config #清空老缓存与配置文件
./scripts/feeds update -a && ./scripts/feeds install -a #更新feeds清单里的东东
make menuconfig #重新配置, 我钩选中了Passwall与vssy
make -j8 download V=s #下载dl库,其实不知道是否每次编译都要来这么一下,反正我是来了一下
make -j$(($(nproc) + 1)) V=s #以前正常编译过其它版本就这条开始编译了, 线程拉满。否则用下面单线程编译
make -j1 V=s #第一次编译推荐用单线程我用虚拟机重新安装 了ubuntu,安装 了所有的环境后,昨天晚上挂机成功编译你说的vssy和passwall
对了,忘记提了, https://github.com/jerrykuku/luci-app-vssr/issues
看第7条 建议搭配Argon主题,以达到最佳的显示效果。
我按要求配置时钩选了argon。
我也有钩选了argon
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
passwall里面有xray , 一样好用的
yes
大哥,你先去 https://github.com/jerrykuku/luci-app-vssr/issues , 这个地方按他说的
编译
假设你的Lean openwrt(最新版本19.07) 在 lede 目录下
cd lede/package/lean/
git clone https://github.com/jerrykuku/lua-maxminddb.git #git lua-maxminddb 依赖
git clone https://github.com/jerrykuku/luci-app-vssr.git ,
clone克隆下来后,手动复制 /lede/package/lean/luci-app-vssr 下面的几个文件, 这几个文件粘贴到kenzo下面的vssr文件里面替换掉, 明白了吗,不知道kenzo下面vssr在哪里?cd lede/feeds/kenzo/luci-app-vssr.
再退到 lede文件夹下
rm -rf ./tmp && rm -rf .config #清空老缓存与配置文件
./scripts/feeds update -a && ./scripts/feeds install -a #更新feeds清单里的东东
make menuconfig #重新配置, 我钩选中了Passwall与vssy
make -j8 download V=s #下载dl库,其实不知道是否每次编译都要来这么一下,反正我是来了一下
make -j$(($(nproc) + 1)) V=s #以前正常编译过其它版本就这条开始编译了, 线程拉满。否则用下面单线程编译
make -j1 V=s #第一次编译推荐用单线程
我用虚拟机重新安装 了ubuntu,安装 了所有的环境后,昨天晚上挂机成功编译你说的vssy和passwall
对了,忘记提了, https://github.com/jerrykuku/luci-app-vssr/issues
看第7条 建议搭配Argon主题,以达到最佳的显示效果。
我按要求配置时钩选了argon。我也有钩选了argon
你还不行? 我成功编译了,我是重新安装Ubuntu20, 重新来弄的,上面是我自己一步一步测试的,成功编译vssr 和 passwall 和 ssr plus+
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
passwall里面有xray , 一样好用的
yes
大哥,你先去 https://github.com/jerrykuku/luci-app-vssr/issues , 这个地方按他说的
编译
假设你的Lean openwrt(最新版本19.07) 在 lede 目录下
cd lede/package/lean/
git clone https://github.com/jerrykuku/lua-maxminddb.git #git lua-maxminddb 依赖
git clone https://github.com/jerrykuku/luci-app-vssr.git ,
clone克隆下来后,手动复制 /lede/package/lean/luci-app-vssr 下面的几个文件, 这几个文件粘贴到kenzo下面的vssr文件里面替换掉, 明白了吗,不知道kenzo下面vssr在哪里?cd lede/feeds/kenzo/luci-app-vssr.
再退到 lede文件夹下
rm -rf ./tmp && rm -rf .config #清空老缓存与配置文件
./scripts/feeds update -a && ./scripts/feeds install -a #更新feeds清单里的东东
make menuconfig #重新配置, 我钩选中了Passwall与vssy
make -j8 download V=s #下载dl库,其实不知道是否每次编译都要来这么一下,反正我是来了一下
make -j$(($(nproc) + 1)) V=s #以前正常编译过其它版本就这条开始编译了, 线程拉满。否则用下面单线程编译
make -j1 V=s #第一次编译推荐用单线程
我用虚拟机重新安装 了ubuntu,安装 了所有的环境后,昨天晚上挂机成功编译你说的vssy和passwall
对了,忘记提了, https://github.com/jerrykuku/luci-app-vssr/issues
看第7条 建议搭配Argon主题,以达到最佳的显示效果。
我按要求配置时钩选了argon。我也有钩选了argon
你还不行? 我成功编译了,我是重新安装Ubuntu20, 重新来弄的,上面是我自己一步一步测试的,成功编译vssr 和 passwall 和 ssr plus+
我現在使用github编译中,希望能成功
https://upload.cc/i1/2021/03/08/a3JIRy.jpg
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
passwall里面有xray , 一样好用的
yes
大哥,你先去 https://github.com/jerrykuku/luci-app-vssr/issues , 这个地方按他说的
编译
假设你的Lean openwrt(最新版本19.07) 在 lede 目录下
cd lede/package/lean/
git clone https://github.com/jerrykuku/lua-maxminddb.git #git lua-maxminddb 依赖
git clone https://github.com/jerrykuku/luci-app-vssr.git ,
clone克隆下来后,手动复制 /lede/package/lean/luci-app-vssr 下面的几个文件, 这几个文件粘贴到kenzo下面的vssr文件里面替换掉, 明白了吗,不知道kenzo下面vssr在哪里?cd lede/feeds/kenzo/luci-app-vssr.
再退到 lede文件夹下
rm -rf ./tmp && rm -rf .config #清空老缓存与配置文件
./scripts/feeds update -a && ./scripts/feeds install -a #更新feeds清单里的东东
make menuconfig #重新配置, 我钩选中了Passwall与vssy
make -j8 download V=s #下载dl库,其实不知道是否每次编译都要来这么一下,反正我是来了一下
make -j$(($(nproc) + 1)) V=s #以前正常编译过其它版本就这条开始编译了, 线程拉满。否则用下面单线程编译
make -j1 V=s #第一次编译推荐用单线程
我用虚拟机重新安装 了ubuntu,安装 了所有的环境后,昨天晚上挂机成功编译你说的vssy和passwall
对了,忘记提了, https://github.com/jerrykuku/luci-app-vssr/issues
看第7条 建议搭配Argon主题,以达到最佳的显示效果。
我按要求配置时钩选了argon。我也有钩选了argon
你还不行? 我成功编译了,我是重新安装Ubuntu20, 重新来弄的,上面是我自己一步一步测试的,成功编译vssr 和 passwall 和 ssr plus+
成功了
https://upload.cc/i1/2021/03/08/P4fRLe.jpg
https://upload.cc/i1/2021/03/08/aqmOnA.jpg
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
passwall里面有xray , 一样好用的
yes
大哥,你先去 https://github.com/jerrykuku/luci-app-vssr/issues , 这个地方按他说的
编译
假设你的Lean openwrt(最新版本19.07) 在 lede 目录下
cd lede/package/lean/
git clone https://github.com/jerrykuku/lua-maxminddb.git #git lua-maxminddb 依赖
git clone https://github.com/jerrykuku/luci-app-vssr.git ,
clone克隆下来后,手动复制 /lede/package/lean/luci-app-vssr 下面的几个文件, 这几个文件粘贴到kenzo下面的vssr文件里面替换掉, 明白了吗,不知道kenzo下面vssr在哪里?cd lede/feeds/kenzo/luci-app-vssr.
再退到 lede文件夹下
rm -rf ./tmp && rm -rf .config #清空老缓存与配置文件
./scripts/feeds update -a && ./scripts/feeds install -a #更新feeds清单里的东东
make menuconfig #重新配置, 我钩选中了Passwall与vssy
make -j8 download V=s #下载dl库,其实不知道是否每次编译都要来这么一下,反正我是来了一下
make -j$(($(nproc) + 1)) V=s #以前正常编译过其它版本就这条开始编译了, 线程拉满。否则用下面单线程编译
make -j1 V=s #第一次编译推荐用单线程
我用虚拟机重新安装 了ubuntu,安装 了所有的环境后,昨天晚上挂机成功编译你说的vssy和passwall
对了,忘记提了, https://github.com/jerrykuku/luci-app-vssr/issues
看第7条 建议搭配Argon主题,以达到最佳的显示效果。
我按要求配置时钩选了argon。我也有钩选了argon
你还不行? 我成功编译了,我是重新安装Ubuntu20, 重新来弄的,上面是我自己一步一步测试的,成功编译vssr 和 passwall 和 ssr plus+
成功了
https://upload.cc/i1/2021/03/08/P4fRLe.jpg
https://upload.cc/i1/2021/03/08/aqmOnA.jpg
好的, 你发的几张图片,我都打不开. 我也不会用github编译, 我只会在ubuntu里面制作.
from small.
還是错误
Makefile:143: recipe for target '/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built' failed
make[3]: *** [/home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/helloworld/xray-core'
time: package/feeds/helloworld/xray-core/compile#4.15#3.04#23.95
package/Makefile:111: recipe for target 'package/feeds/helloworld/xray-core/compile' failed
make[2]: *** [package/feeds/helloworld/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
package/Makefile:107: recipe for target '/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile' failed
make[1]: *** [/home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
/home/a/lede/include/toplevel.mk:222: recipe for target 'world' failed
make: *** [world] Error 2你看这位大哥的方法没?这位大哥的是主线,
https://github.com/esirplayground/lede
这大哥只是在lede文件夹操作
你发的这大哥的是补充的
https://github.com/kenzok8/openwrt-packages,
补充的大哥在下面有写着要进这 lede文件夹里面的package文件, 所以是补充的,因为Lede那边不提供FQ的,然后packages包下面操作的git clone XXXXXXX网址XXXXXXX 这个命令, 就不用把网址写到feeds.conf.default文件里了, 两者选一。
我建议你最好不钩选任何东西,就默认的先make编你所提供的方法都试過了!
只编译coolsnowwolf大是成功
https://github.com/coolsnowwolf/lede
之後只加HelloWorld就失敗了!
https://github.com/kenzok8/openwrt-packages/tree/master/luci-app-vssr
也試過make clean、make distclean、rm -rf ./tmp && rm -rf .config、feels clean再编译也是出错
make[3]: *** [Makefile:146: /home/a/lede/build_dir/target-x86_64_musl/Xray-core-1.3.1/.built] Error 1
make[3]: Leaving directory '/home/a/lede/feeds/small/xray-core'
time: package/feeds/small/xray-core/compile#4.30#2.76#23.97
make[2]: *** [package/Makefile:113: package/feeds/small/xray-core/compile] Error 2
make[2]: Leaving directory '/home/a/lede'
make[1]: *** [package/Makefile:107: /home/a/lede/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/a/lede'
make: *** [/home/a/lede/include/toplevel.mk:224: world] Error 2vssr我也失败, 只编译Passwall 和 SSR plus+是没问题的。
好的,謝謝您
之前Xray-core-1.2是沒有问题的
相信是Xray-core-1.3.1问题passwall里面有xray , 其它app不钩, 单独钩passwall你失败?
沒有試過,因為我覺得vssr比較好用
passwall里面有xray , 一样好用的
yes
大哥,你先去 https://github.com/jerrykuku/luci-app-vssr/issues , 这个地方按他说的
编译
假设你的Lean openwrt(最新版本19.07) 在 lede 目录下
cd lede/package/lean/
git clone https://github.com/jerrykuku/lua-maxminddb.git #git lua-maxminddb 依赖
git clone https://github.com/jerrykuku/luci-app-vssr.git ,
clone克隆下来后,手动复制 /lede/package/lean/luci-app-vssr 下面的几个文件, 这几个文件粘贴到kenzo下面的vssr文件里面替换掉, 明白了吗,不知道kenzo下面vssr在哪里?cd lede/feeds/kenzo/luci-app-vssr.
再退到 lede文件夹下
rm -rf ./tmp && rm -rf .config #清空老缓存与配置文件
./scripts/feeds update -a && ./scripts/feeds install -a #更新feeds清单里的东东
make menuconfig #重新配置, 我钩选中了Passwall与vssy
make -j8 download V=s #下载dl库,其实不知道是否每次编译都要来这么一下,反正我是来了一下
make -j$(($(nproc) + 1)) V=s #以前正常编译过其它版本就这条开始编译了, 线程拉满。否则用下面单线程编译
make -j1 V=s #第一次编译推荐用单线程
我用虚拟机重新安装 了ubuntu,安装 了所有的环境后,昨天晚上挂机成功编译你说的vssy和passwall
对了,忘记提了, https://github.com/jerrykuku/luci-app-vssr/issues
看第7条 建议搭配Argon主题,以达到最佳的显示效果。
我按要求配置时钩选了argon。我也有钩选了argon
你还不行? 我成功编译了,我是重新安装Ubuntu20, 重新来弄的,上面是我自己一步一步测试的,成功编译vssr 和 passwall 和 ssr plus+
成功了
https://upload.cc/i1/2021/03/08/P4fRLe.jpg
https://upload.cc/i1/2021/03/08/aqmOnA.jpg好的, 你发的几张图片,我都打不开. 我也不会用github编译, 我只会在ubuntu里面制作.
图片打不开?你沒有翻牆嗎?
https://p3terx.com/archives/build-openwrt-with-github-actions.html
from small.
Related Issues (20)
- 提示缺少“mosdns”和“luci-lua-runtime”依赖 HOT 8
- v2dat编译失败
- 475-5编译失败 HOT 6
- v2ray-plugin编译失败! HOT 15
- 编译luci-app-netdata插件
- LEDE源码,V2ray-plugin编译报错,是go版本的问题吗?
- 编译passwall出错 HOT 1
- 编译出错,提示bypss有误。 HOT 2
- go版本到1.22后,编译碰到的问题和解决经过,希望能给和我一样的小白一点参考。 HOT 27
- mbedtls与ImmortalWrt中openssl依赖冲突 HOT 3
- 475-9 看视频转圈圈,instagram连接失败 HOT 1
- ERROR: package/feeds/packages/v2dat failed to build HOT 5
- xray-core何时恢复? HOT 4
- chinadns-ng错误
- ERROR: package/feeds/small/chinadns-ng failed to build. HOT 2
- ssr++支持添加wireguard节点但是不能用
- xray-core一直云编译错误,更换了golang版本,是插件冲突还是什么问题? HOT 1
- ERROR: package/feeds/packages/shadowsocks-libev failed to build. HOT 7
- 能添加Luci-app-diskman吗
- 缺少shadowsocksr-libev依赖
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from small.