Doesn't seem to work with the current Master about onstep-python HOT 5 CLOSED

Both the drift test and backlash proceed without any errors.
I am using Python3
Here is what I get when I do the drift test:
Time OnStep Time Sidereal St RA DE Equ RAdlta RA"/min RA"Max DE"/min DE"Max 14:54:48.054491 14:54:48.3587 22:33:34.7700 N/A 05:32:02.8294 +89*55:49 68.311142,89.932569 0.00 0.00 0.00 0.00 0.00 14:54:58.415899 14:54:58.7702 22:33:45.2100 N/A 05:32:13.2694 +89*55:49 68.354642,89.932569 0.00 938.85 156.47 0.00 0.00 14:55:08.779119 14:55:09.1817 22:33:55.6500 N/A 05:32:23.7094 +89*55:49 68.398142,89.932569 156.47 938.85 312.95 0.00 0.00 14:55:19.141584 14:55:19.5932 22:34:06.1000 N/A 05:32:34.1494 +89*55:49 68.441642,89.932569 156.47 908.56 469.42 0.00 0.00 14:55:29.505572 14:55:30.0146 22:34:16.5400 N/A 05:32:44.5894 +89*55:49 68.485184,89.932569 156.63 916.17 626.05 0.00 0.00 14:55:39.867888 14:55:40.4261 22:34:26.9800 N/A 05:32:55.0294 +89*55:49 68.528684,89.932569 156.47 920.62 782.53 0.00 0.00

from onstep-python.

from the experience, different versions of python3 act differently. Would be helpful to know, which version you used.

from onstep-python.

Should not be the case here. Nothing esoteric in my code.

I am using 3.6.9 (the one in Ubuntu 18.04 repos).

from onstep-python.

Need to check mine, most likely 3.8, as it's a fresh installation of the Raspbian. Any idea, what could possibly cause those errors, if not the python3 different version?

from onstep-python.

No idea specifically.

But as per the read me, you need to enter your coordinates in examples/config.py.
At a minimum uncomment lat and lon and put some valid values there.

Then set ra and de to some star that is above the horizon.

Then run ./examples/menu.py

From there, select Initialize, then Slew to a Star.
While the mount is slewing, select Report Status and see if it changes to TRK and the coordinates of the star.

from onstep-python.