Feedback about mmdvm_cm HOT 10 CLOSED

Hi Andy, thank you for add DMR2YSF and DMR2NXDN very quickly.

I will add to DMR2YSF (I think soon) the reflector selection using DMR TG, probably using a txt file with TG <-> Reflector mapping.

Regarding YSF2NXDN/YSF2DMR/YSF2P25, all they can select the target TG using the radio, but must be connected directly to MMDVMHost. This is because YSFGateway processes all Wires-X first. I think we need a large modification to YSFGateway for a better integration of all these programs.

from mmdvm_cm.

For DMR2YSF;
In case it helps I already have FCS and YSF host files:
http://www.pistar.uk/downloads/YSF_Hosts.txt
http://www.pistar.uk/downloads/FCS_Hosts.txt

you may consider mapping all FCS to 99nnn to keep them all 5 digit numbers (I'd find that handy), because then I can keep my DMRGateway setup (7nnnnn is forwarded to DMR2YSF on Pi-Star), although we can always work with whatever you end up with :)

As for the YSF2xxx, no great ideas with those yet :)

from mmdvm_cm.

Hi Andy, finally I decided to add TGList support for DMR2YSF, this will give more flexibility for the users. Please check the new MMDVM_CM version.

Regards,
Andy CA6JAU

from mmdvm_cm.

Thank you Andy, I'll pull those in over the next couple of days.

from mmdvm_cm.

Here is a DMR map for every YSF destination:

http://www.pistar.uk/downloads/TGList_YSF.txt

Not sure if the FCS will work yet - I'll be testing that shortly.

from mmdvm_cm.

Looking at your list, you can not use "names" for FCS reflectors, you need to use IDs (numbers) also.

from mmdvm_cm.

The current YSFGateway uses the names and not the numbers to connect; I may have to just remove the FCS refs for now - those dong have numbers.

from mmdvm_cm.

from mmdvm_cm.

While you work that out - I will suppress the FCS hosts from the list - at least that makes it usable.

from mmdvm_cm.

Hi Andy, you can use your original "TGList_YSF.txt" file for DMR2YSF, now will recognize correctly the FCS rooms.

from mmdvm_cm.