Advice needed how to best prepare data for analysis in URH about urh HOT 8 CLOSED

Here are the settings from gqrx. You can clearly see that 433.863420 is not in line with those small dots in the waterfall diagram.

When I record this and open it in URH I only get

Cropped to the peak:

When I manually set the frequency to 433.941.120 which perfectly matches the line of dots and record I get something like this which also doesn't look right?

Playing with AGC and other settings yields no improvement either. What am I doing wrong?

from urh.

The .wav format is not suitable for saving I/Q data from a SDR, please use a raw I/Q data format like used by GnuRadio or URH.

from urh.

Oh, but I didn't want to import I/Q, I deliberately wanted to choose WAV. Doesn't URH support WAV according to this? https://github.com/jopohl/urh/wiki/Supported-signal-file-formats

from urh.

URH does support WAV files, but note that the WAV file format does not (!) save clean I/Q data. So if something does not work as expected in URH, do not blame URH but WAV.

from urh.

I might have a wrong expectation, but I assumed that a signal like shown in the 4th picture from above would actually be what the contents of the WAV file would look like? The thing is: As far as I understood getting information from signals in CTFs or similar tasks is by analyzing the provided WAV files (because they are much smaller than I/Q files), so I wanted to exercise a bit how to properly generate those files so that URH can understand them. As I said initially, I don't intend to blame URH for anything not working, I was just looking for hints, that I might be using gqrx in a wrong way? I tried to set the same params like URH seems to use according to the 1st/2nd screenshot.

from urh.

When using WAV files the signals are saved in demodulated form in there. URH demodulates signals itself to allow for playing around with all demodulation settings, so there is a mismatch (Interpretation does not work then).
According to the images the sample rate of your signals might be wrong or mono/stereo does not fit. Maybe there are also some other Wave File format options?

from urh.

OK, understood, makes perfectly sense. I'll try to read up a little bit about this and learn some more.

from urh.

I'll close here for now. You can also contact us in Slack for further discussions!

from urh.