Successful installation but can't run script about neet HOT 12 CLOSED

Hi 007scorpio. This appears to be the same as issue #8 which is already fixed and closed. Please run neet-update (or neet --update) and then try again, then let me know if that worked.
Cheers,
Jon

from neet.

Please send me the following:

• The output of "ip addr show"
• The output of "route -n"
• The full command line you used to start neet when it failed.

Thanks!

from neet.

ip addr show:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 08:00:27:a4:e7:df brd ff:ff:ff:ff:ff:ff
inet 10.152.152.12/24 brd 10.152.152.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::816f:454f:8569:887d/64 scope link
valid_lft forever preferred_lft forever
4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 100
link/none
inet 10.211.1.17 peer 10.211.1.18/32 scope global tun0
valid_lft forever preferred_lft forever
inet6 fe80::f04a:c906:dc25:c007/64 scope link flags 800
valid_lft forever preferred_lft forever

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.211.x.x 128.0.0.0 UG 0 0 0 tun0
0.0.0.0 10.152.x.x 0.0.0.0 UG 100 0 0 eth0
10.152.x.x 0.0.0.0 255.255.255.0 U 100 0 0 eth0
10.211.x.x 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
128.0.0.0 10.211.x.x 128.0.0.0 UG 0 0 0 tun0
186.38.x.x 10.152.x.x 255.255.255.255 UGH 0 0 0 eth0

Neet full command:

neet -I 196.x.x.x-255

from neet.

OK - thanks. I see what it is. I haven't tested it with a PTP link since the other day when I changed how it read the IP configuration. Should have a fix out very soon.

from neet.

Thanks dude u are awesome... Neet is a great tool. Making pentest very easier...

from neet.

Thanks 👍 Can you try neet-update now and see if it's fixed please?

from neet.

ok it was using the PTP interface by default so i ifconfig it down to use eth0 interface and now it working.

from neet.

OK. It should now also work if you need to test something over that tun0 interface. Could you test that if you get a chance please? I don't have a PTP endpoint handy at the moment. Thanks!

from neet.

ok i will and let u know pls. Thanks dude.

from neet.

👍

from neet.

PTP is working now but on my kali rolling it says it can't find metasploit installation

from neet.

Cool - thanks for testing with the PTP link!
The metasploit installation is already an open issue - #7, opened by you :-p I'll close this one now, as it's more specifically about your PTP interface issue that is now fixed. We'll keep #7 open as it includes the metasploit problem. Cheers!

from neet.