Comments (3)
sounds like misconfigured OS to me. hard to tell without any logs in the first place
from ebusd.
A bit hasty conclusion..?
Even after a fresh install (Bookworm install on RPi4), following guidelines for ebusd installation, a root instance for /usr/bin/ebusd is initiated. The instance is automatically re-populated even if running kill, even if sudo nano /etc/default/ebusd
is deactivated, i.e. "#EBUSD_OPTS="--scanconfig"
.
So, when running sudo ebusd -d /dev/ttyUSB0 --scanconfig --configpath=/etc/ebusd/config --enablehex --lograwdata --logareas=all --logfile=/var/log/ebusd.log --loglevel=debug -f --mqtthost=localhost --mqttport=1883 --accesslevel="*"
, signal is initially acquired, and [bus noice]
is starting to come in, when all of a sudden there seems to occur an issue.
As mentioned, the ebusd setup has been workling flawlessly until last December (using a modified 08.hmu file).
024-02-04 21:36:02.424 [bus notice] <710835110107b400053267a0a0280d987d
2024-02-04 21:36:03.768 [main debug] performing regular tasks
2024-02-04 21:36:03.768 [bus info] scan 08 cmd: 3108070400
2024-02-04 21:36:03.796 [bus debug] start request 31
2024-02-04 21:36:03.796 [bus debug] arbitration start with 31
2024-02-04 21:36:03.881 [bus notice] >31
2024-02-04 21:36:03.881 [bus debug] arbitration lost
2024-02-04 21:36:03.881 [bus debug] ERR: arbitration lost during ready, retry
2024-02-04 21:36:03.881 [bus debug] start request 31
2024-02-04 21:36:03.881 [bus debug] arbitration start with 31
2024-02-04 21:36:03.967 [bus notice] >31
2024-02-04 21:36:03.967 [bus debug] arbitration lost
2024-02-04 21:36:03.967 [bus debug] ERR: arbitration lost during ready, retry
2024-02-04 21:36:03.967 [bus debug] start request 31
2024-02-04 21:36:03.967 [bus debug] arbitration start with 31
2024-02-04 21:36:04.053 [bus notice] >31
2024-02-04 21:36:04.053 [bus debug] arbitration lost
2024-02-04 21:36:04.053 [bus debug] ERR: arbitration lost during ready, retry
2024-02-04 21:36:04.053 [bus debug] start request 31
2024-02-04 21:36:04.053 [bus debug] arbitration start with 31
from ebusd.
not at all. if ebusd is installed, it registers in the OS as daemon and as such you have to stop that if you want to run it explicitly in foreground.
from ebusd.
Related Issues (20)
- unit of measurement 'None' in device class ('temperature') HOT 1
- Using --mqttchanges occasionally misses changes. HOT 13
- Wrong default name template in entites MQTT autodiscovery in HA HOT 1
- Vaillant VMS SolPumpPower reported in kW instead of % in Home Assistant (MQTT) HOT 1
- Since update to Build: 20240317 : Lots of Warnings : host: errors: protocol HOT 2
- Conditional message ignored if slave-address unfilled HOT 3
- [bus error] send to fe: ERR: arbitration lost HOT 1
- Condition '>0' does not work
- Feature request: Accept multiple identical configuration lines that differs only for the master address HOT 1
- Connect to two network adapters using Home Assistant OS and addon
- Connect to two network adapters using Home Assistant OS and addon HOT 3
- eBUS Adapter v5, Firmware Version 2024-03-30 Kommunikationsprobleme HOT 3
- HomeAssistant integration - ebusd - measurement 'None' which is not a valid unit for the device class ('temperature') HOT 3
- All communication stopped HOT 3
- Guidance on debug level messages HOT 2
- Entities in Home Assistant have double names HOT 2
- Separate log channel for device status
- reload discards loaded config files but doesn't reload
- Some broadcast messages are not decoded HOT 1
- can't run 2 different ebusd.service
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ebusd.