Comments (15)
apbarratt
commented on September 22, 2024
Couple of edits to above to give clearer logs and more detail of setup.
from ebusd.
apbarratt
commented on September 22, 2024
I figured it'd be sensible to try updating the firmware on the adapter, so it is now at build 20231015 (glad to see the endless empty password prompt has been fixed!)
Anyway, after doing that, the logs have a new interesting message in them that I suspect may shed some clues:
2023-10-21 19:10:56.485 [bus error] device status: eBUS comm error: overrun
I'm now starting to wonder if my adapter might have burnt something out after a few months of usage? Either that or something on the heat pump setup itself, which is itself relatively new too.
A longer chunk of those new logs:
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
> ebusd --foreground --mqtthost=core-mosquitto --mqttport=1883 --mqttuser=addons --mqttpass=ge9fashooM5eiraeja9ohr6oo8jaegood5igh3eeghahkobei4pai1odie2eichu --scanconfig --mqttjson --configpath=/config/ebusd-configuration/latest/en --latency=10 --accesslevel=* --pollinterval=5 --mqttint=/config/ebusd/mqtt-hassio.cfg --mqtttopic=ebusd --device=ens:192.168.1.155:9999 --log=all:error
2023-10-21 19:10:56.485 [bus error] device status: eBUS comm error: overrun
2023-10-21 19:10:58.073 [main error] scan config 15: ERR: read timeout
2023-10-21 19:11:01.087 [main error] unable to load scan config 76: no file from vaillant with prefix 76 found
2023-10-21 19:11:01.088 [main error] scan config 76: ERR: read timeout
2023-10-21 19:11:49.232 [update error] unable to parse poll-read hmu Status02 from 3108b5110102 / 00: ERR: invalid position
2023-10-21 19:11:53.496 [mqtt error] decode hmu Status02: ERR: invalid position
2023-10-21 19:11:55.222 [update error] unable to parse poll-read hmu Status16 from 3108b5040116 / 00: ERR: invalid position
2023-10-21 19:11:58.505 [mqtt error] decode hmu Status16: ERR: invalid position
2023-10-21 19:12:01.353 [update error] unable to parse poll-read hmu Status from 3108b5110103 / 00: ERR: invalid position
2023-10-21 19:12:04.403 [mqtt error] decode hmu Status: ERR: invalid position
2023-10-21 19:12:07.283 [update error] unable to parse poll-read hmu YieldThisYear10 from 3108b516041a010a00 / 00: ERR: invalid position
2023-10-21 19:12:11.803 [mqtt error] decode hmu YieldThisYear10: ERR: invalid position
2023-10-21 19:12:13.294 [update error] unable to parse poll-read hmu YieldThisYear11 from 3108b516041a010b00 / 00: ERR: invalid position
2023-10-21 19:12:16.824 [mqtt error] decode hmu YieldThisYear11: ERR: invalid position
2023-10-21 19:12:19.283 [update error] unable to parse poll-read hmu YieldThisYear12 from 3108b516041a010c00 / 00: ERR: invalid position
2023-10-21 19:12:21.835 [mqtt error] decode hmu YieldThisYear12: ERR: invalid position
2023-10-21 19:12:25.263 [update error] unable to parse poll-read hmu YieldThisYear1 from 3108b516041a010100 / 00: ERR: invalid position
2023-10-21 19:12:26.883 [mqtt error] decode hmu YieldThisYear1: ERR: invalid position
2023-10-21 19:12:31.273 [update error] unable to parse poll-read hmu YieldThisYear2 from 3108b516041a010200 / 00: ERR: invalid position
2023-10-21 19:12:36.944 [mqtt error] decode hmu YieldThisYear2: ERR: invalid position
2023-10-21 19:12:37.254 [update error] unable to parse poll-read hmu YieldThisYear3 from 3108b516041a010300 / 00: ERR: invalid position
2023-10-21 19:12:41.953 [mqtt error] decode hmu YieldThisYear3: ERR: invalid position
2023-10-21 19:12:43.295 [update error] unable to parse poll-read hmu YieldThisYear4 from 3108b516041a010400 / 00: ERR: invalid position
2023-10-21 19:12:47.004 [mqtt error] decode hmu YieldThisYear4: ERR: invalid position
2023-10-21 19:12:49.283 [update error] unable to parse poll-read hmu YieldThisYear5 from 3108b516041a010500 / 00: ERR: invalid position
2023-10-21 19:12:52.013 [mqtt error] decode hmu YieldThisYear5: ERR: invalid position
2023-10-21 19:12:55.333 [update error] unable to parse poll-read hmu YieldThisYear6 from 3108b516041a010600 / 00: ERR: invalid position
2023-10-21 19:12:57.062 [mqtt error] decode hmu YieldThisYear6: ERR: invalid position
2023-10-21 19:13:01.355 [update error] unable to parse poll-read hmu YieldThisYear7 from 3108b516041a010700 / 00: ERR: invalid position
2023-10-21 19:13:07.122 [mqtt error] decode hmu YieldThisYear7: ERR: invalid position
2023-10-21 19:13:07.395 [update error] unable to parse poll-read hmu YieldThisYear8 from 3108b516041a010800 / 00: ERR: invalid position
2023-10-21 19:13:12.130 [mqtt error] decode hmu YieldThisYear8: ERR: invalid position
2023-10-21 19:13:13.274 [update error] unable to parse poll-read hmu YieldThisYear9 from 3108b516041a010900 / 00: ERR: invalid position
2023-10-21 19:13:17.180 [mqtt error] decode hmu YieldThisYear9: ERR: invalid position
2023-10-21 19:13:19.238 [update error] unable to parse poll-read hmu YieldTotal from 3108b516021801 / 00: ERR: invalid position
2023-10-21 19:13:22.189 [mqtt error] decode hmu YieldTotal: ERR: invalid position
2023-10-21 19:13:49.599 [bus error] poll basv Hc1ExcessTemp failed: ERR: arbitration lost
from ebusd.
apbarratt
commented on September 22, 2024
Hmmm, never mind, that seems to have gone away after I did a general reboot of everything including the heatpump power itself:
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
> ebusd --foreground --mqtthost=core-mosquitto --mqttport=1883 --mqttuser=addons --mqttpass=ge9fashooM5eiraeja9ohr6oo8jaegood5igh3eeghahkobei4pai1odie2eichu --scanconfig --mqttjson --configpath=/config/ebusd-configuration/latest/en --latency=10 --accesslevel=* --pollinterval=5 --mqttint=/config/ebusd/mqtt-hassio.cfg --mqtttopic=ebusd --device=ens:192.168.1.155:9999 --log=all:error
2023-10-21 19:19:50.008 [main error] scan config 15: ERR: SYN received
2023-10-21 19:19:52.933 [main error] unable to load scan config 76: no file from vaillant with prefix 76 found
2023-10-21 19:19:52.933 [main error] scan config 76: ERR: read timeout
2023-10-21 19:19:59.043 [bus error] poll hmu CurrentYieldPower failed: ERR: no signal
2023-10-21 19:19:59.043 [bus error] signal lost
2023-10-21 19:20:09.316 [bus error] poll hmu EnergyHc failed: ERR: SYN received
2023-10-21 19:20:15.206 [bus error] poll hmu EnergyIntegral failed: ERR: SYN received
2023-10-21 19:20:27.474 [bus error] poll hmu HoursCool failed: ERR: read timeout
2023-10-21 19:20:39.227 [update error] unable to parse poll-read hmu Status02 from 3108b5110102 / 00: ERR: invalid position
2023-10-21 19:20:43.258 [mqtt error] decode hmu Status02: ERR: invalid position
2023-10-21 19:20:45.269 [update error] unable to parse poll-read hmu Status16 from 3108b5040116 / 00: ERR: invalid position
2023-10-21 19:20:48.265 [mqtt error] decode hmu Status16: ERR: invalid position
2023-10-21 19:20:51.197 [update error] unable to parse poll-read hmu Status from 3108b5110103 / 00: ERR: invalid position
2023-10-21 19:20:53.314 [mqtt error] decode hmu Status: ERR: invalid position
2023-10-21 19:20:57.132 [bus error] poll hmu YieldThisYear10 failed: ERR: SYN received
2023-10-21 19:21:03.277 [update error] unable to parse poll-read hmu YieldThisYear11 from 3108b516041a010b00 / 00: ERR: invalid position
2023-10-21 19:21:08.340 [mqtt error] decode hmu YieldThisYear11: ERR: invalid position
2023-10-21 19:21:09.278 [update error] unable to parse poll-read hmu YieldThisYear12 from 3108b516041a010c00 / 00: ERR: invalid position
2023-10-21 19:21:13.388 [mqtt error] decode hmu YieldThisYear12: ERR: invalid position
2023-10-21 19:21:15.268 [bus error] poll hmu YieldThisYear1 failed: ERR: read timeout
2023-10-21 19:21:17.015 [bus error] signal lost
2023-10-21 19:21:20.091 [bus error] signal lost
2023-10-21 19:21:28.942 [update error] unable to parse poll-read hmu YieldThisYear2 from 3108b516041a010200 / 00: ERR: invalid position
2023-10-21 19:21:33.424 [mqtt error] decode hmu YieldThisYear2: ERR: invalid position
2023-10-21 19:21:34.290 [update error] unable to parse poll-read hmu YieldThisYear3 from 3108b516041a010300 / 00: ERR: invalid position
2023-10-21 19:21:38.447 [mqtt error] decode hmu YieldThisYear3: ERR: invalid position
2023-10-21 19:21:40.318 [update error] unable to parse poll-read hmu YieldThisYear4 from 3108b516041a010400 / 00: ERR: invalid position
2023-10-21 19:21:43.508 [mqtt error] decode hmu YieldThisYear4: ERR: invalid position
2023-10-21 19:21:46.288 [update error] unable to parse poll-read hmu YieldThisYear5 from 3108b516041a010500 / 00: ERR: invalid position
2023-10-21 19:21:48.556 [mqtt error] decode hmu YieldThisYear5: ERR: invalid position
2023-10-21 19:21:52.376 [bus error] poll hmu YieldThisYear6 failed: ERR: read timeout
2023-10-21 19:21:58.203 [bus error] poll hmu YieldThisYear7 failed: ERR: SYN received
2023-10-21 19:22:05.009 [bus error] poll hmu YieldThisYear8 failed: ERR: no signal
2023-10-21 19:22:05.009 [bus error] signal lost
2023-10-21 19:22:09.088 [bus error] signal lost
2023-10-21 19:22:10.187 [bus error] poll hmu YieldThisYear9 failed: ERR: SYN received
2023-10-21 19:22:16.228 [update error] unable to parse poll-read hmu YieldTotal from 3108b516021801 / 00: ERR: invalid position
2023-10-21 19:22:18.542 [mqtt error] decode hmu YieldTotal: ERR: invalid position
2023-10-21 19:22:22.197 [bus error] poll basv AdaptHeatCurve failed: ERR: SYN received
2023-10-21 19:22:28.895 [bus error] poll basv DisplayedOutsideTemp failed: ERR: arbitration lost
from ebusd.
apbarratt
commented on September 22, 2024
But now that the UI for the adapter is being more accommodating, I can see a number of errors on the Log page for it. I don't know if this indicates the issue lies with the adapter, if it does, I suppose I'm in the wrong repo:
| Time | Severity | Log |
|---|---|---|
| 19:18:33 | Info | execute: var isnew 1 |
| 19:18:33 | Info | execute: if "§isnvs ebus.host" "var isnew 0" |
| 19:18:33 | Info | execute: isnvs ebus.host |
| 19:18:33 | Info | execute: var isnew 0 |
| 19:18:33 | Info | execute: if "§isnvs sta.on" "var isnew 0" |
| 19:18:33 | Info | execute: isnvs sta.on |
| 19:18:33 | Info | execute: var isnew 0 |
| 19:18:33 | Info | execute: if "§isnvs eth.on" "var isnew 0" |
| 19:18:33 | Info | execute: isnvs eth.on |
| 19:18:33 | Warning | execute: command failed: isnvs eth.on = 1 |
| 19:18:33 | Info | execute: on -lo iol 9 "led 0 255" "led 1 255" "led 2 255" "sleep 500" restart |
| 19:18:33 | io trigger installed | |
| 19:18:33 | Info | execute: on iol 9 "led 2 50 0" |
| 19:18:33 | io trigger installed | |
| 19:18:33 | Info | execute: if "var skipstart" "led 0 255 0 5000" "led 2 50" "ap EBUS" server exit |
| 19:18:33 | Info | execute: var skipstart |
| 19:18:33 | variable skipstart = 0 | |
| 19:18:33 | Info | execute: function start server "led 0 10" |
| 19:18:33 | function installed | |
| 19:18:33 | Info | execute: on wifi 1 start |
| 19:18:33 | network trigger installed | |
| 19:18:33 | Info | execute: on eth 1 start |
| 19:18:33 | network trigger installed | |
| 19:18:33 | Info | execute: if "isnvs sta.on" "led 0 10 255 5000" "sleep 100" sta |
| 19:18:33 | Info | execute: isnvs sta.on |
| 19:18:33 | Info | execute: led 0 10 255 5000 |
| 19:18:33 | Info | execute: sleep 100 |
| 19:18:33 | Info | statusLedTimerFn: duty set to 10 |
| 19:18:33 | Info | execute: sta |
| 19:18:33 | Info | pp: pp rom version: 9387209 |
| 19:18:33 | Info | net80211: net80211 rom version: 9387209 |
| 19:18:33 | Info | wifi_init: tcpip mbox: 32 |
| 19:18:33 | Info | wifi_init: udp mbox: 6 |
| 19:18:33 | Info | wifi_init: tcp mbox: 6 |
| 19:18:33 | Info | wifi_init: tcp tx win: 5744 |
| 19:18:33 | Info | wifi_init: tcp rx win: 5744 |
| 19:18:33 | Info | wifi_init: tcp mss: 1440 |
| 19:18:33 | Info | wifi_init: WiFi IRAM OP enabled |
| 19:18:33 | Info | wifi_init: WiFi RX IRAM OP enabled |
| 19:18:33 | Info | wifi_init: LWIP IRAM OP enabled |
| 19:18:33 | Info | phy_init: phy_version 1130,b4e4b80,Sep 5 2023,11:09:30 |
| 19:18:33 | sta connecting to 'Vote Yes for Scotland' | |
| 19:18:36 | Info | cmd_wifi: sta connect |
| 19:18:38 | Info | esp_netif_handlers: sta ip: 192.168.1.155, mask: 255.255.255.0, gw: 192.168.1.254 |
| 19:18:38 | Info | cmd_wifi: sta got ip |
| 19:18:38 | Info | repl_event_task: wifi event: 1 |
| 19:18:38 | Info | execute: led 0 50 |
| 19:18:38 | Info | execute: start |
| 19:18:38 | Info | execute: server |
| 19:18:38 | Info | esp-rest: Starting HTTP Server |
| 19:18:38 | server started | |
| 19:18:38 | Info | execute: led 0 10 |
| 19:18:38 | Info | execute: if "var isnew" "ap EBUS" else "if "isnvs ap.on" ap" |
| 19:18:38 | Info | execute: var isnew |
| 19:18:38 | variable isnew = 0 | |
| 19:18:38 | Info | execute: if "isnvs ap.on" ap |
| 19:18:38 | Info | execute: isnvs ap.on |
| 19:18:38 | Info | execute: var eth 0 |
| 19:18:38 | Info | execute: if "eth -t" "var eth 1" else "if "eth -wt" "var eth 2"" |
| 19:18:38 | Info | execute: eth -t |
| 19:18:38 | Error | w5500.mac: w5500_reset(302): reset timeout |
| 19:18:38 | Error | w5500.mac: emac_w5500_init(793): reset w5500 failed |
| 19:18:38 | Error | esp_eth: esp_eth_driver_install(228): init mac failed |
| 19:18:38 | Error | eth: initialise_ethernet(250): install driver |
| 19:18:38 | Ethernet on USR-ES1 not available | |
| 19:18:38 | Warning | execute: command failed: eth -t = 1 |
| 19:18:38 | Info | execute: if "eth -wt" "var eth 2" |
| 19:18:38 | Info | execute: eth -wt |
| 19:18:38 | Error | w5500.mac: w5500_reset(302): reset timeout |
| 19:18:38 | Error | w5500.mac: emac_w5500_init(793): reset w5500 failed |
| 19:18:38 | Error | esp_eth: esp_eth_driver_install(228): init mac failed |
| 19:18:38 | Error | eth: initialise_ethernet(250): install driver |
| 19:18:38 | Ethernet on W5500 module not available | |
| 19:18:38 | Warning | execute: command failed: eth -wt = 1 |
| 19:18:38 | Info | execute: on -o server 2 "after -o -m 500 0 restart" |
| 19:18:38 | server trigger installed | |
| 19:18:38 | Info | execute: io -a |
| 19:18:38 | Info | execute: function chkethcfg "if "eth -c" "var eth 1"" |
| 19:18:38 | function installed | |
| 19:18:38 | Info | execute: if "!var isnew" "if "!var eth" chkethcfg" |
| 19:18:38 | Info | execute: var isnew |
| 19:18:38 | variable isnew = 0 | |
| 19:18:38 | Info | execute: if "!var eth" chkethcfg |
| 19:18:38 | Info | execute: var eth |
| 19:18:38 | variable eth = 0 | |
| 19:18:38 | Info | execute: chkethcfg |
| 19:18:38 | Info | execute: if "eth -c" "var eth 1" |
| 19:18:38 | Info | execute: eth -c |
| 19:18:38 | Warning | execute: command failed: eth -c = 1 |
| 19:18:38 | Info | execute: function enet eth "led 0 50" "led 1 50" "led 2 50" |
| 19:18:38 | function installed | |
| 19:18:38 | Info | execute: if "isnvs eth.on" "if "var eth" enet" |
| 19:18:38 | Info | execute: isnvs eth.on |
| 19:18:38 | Warning | execute: command failed: isnvs eth.on = 1 |
| 19:18:38 | Info | execute: function ebusnvs ebus "led 0 50" |
| 19:18:38 | function installed | |
| 19:18:38 | Info | execute: if "isnvs ebus.host" ebusnvs exit |
| 19:18:38 | Info | execute: isnvs ebus.host |
| 19:18:38 | Info | execute: ebusnvs |
| 19:18:38 | Info | execute: ebus |
| 19:18:38 | Info | init_ebus: switching to enhanced eBUS mode on TCP port (with bitrate deviation 0 and enhanced arbitration delay 200 us) |
| 19:18:38 | Info | setup_uart: eBUS UART 1 on TX=10(inv) RX=7(inv) with 2400 Bd |
| 19:18:38 | Info | uart: ALREADY NULL |
| 19:18:38 | Info | host_task_tcp: listening |
| 19:18:38 | Info | init_ebus: timer started |
| 19:18:38 | Info | execute: led 0 50 |
| 19:18:38 | Info | execute: exit |
| 19:18:38 | Info | execute: command exit |
| 19:18:38 | Info | execute: command exit |
| 19:18:38 | Info | replExecuteFromFile: successfully executed 41/41 commands from '/data/main.eas' |
| 19:18:38 | Welcome to eBUS Adapter Shield Interface! Type 'help' to get the list of commands. | |
| 19:18:38 | Your terminal application does not support escape sequences. | |
| 19:18:38 | Info | main_task: Returned from app_main() |
| 19:18:38 | Info | statusLedTimerFn: duty set to 10 |
| 19:18:38 | Info | statusLedTimerFn: duty set to 50 |
| 19:18:44 | Info | sntpTimeCb: got NTP time: 2023-10-21 18:18:44 |
| 19:19:35 | Info | host_task_tcp: accepted: 192.168.1.199 |
| 19:21:16 | Info | statusLedTimerFn: btn short pressed 0 |
| 19:21:16 | Info | execute: led 2 50 0 |
| 19:21:16 | 2 duty set to 50 | |
| 19:21:16 | 2 fade started | |
| 19:21:25 | Error | ebus_tcp_server_loop: recv: errno 113 |
| 19:21:25 | Error | ebus_tcp_server_loop: recv: errno 128 |
| 19:21:25 | Info | host_task_tcp: closed: 192.168.1.199 |
| 19:21:25 | Info | host_task_tcp: listening |
| 19:21:28 | Info | host_task_tcp: accepted: 192.168.1.199 |
| 19:21:31 | Info | statusLedTimerFn: btn short pressed 1 |
| 19:21:33 | Info | statusLedTimerFn: btn long pressed 1 |
from ebusd.
munkien
commented on September 22, 2024
It looks like its using a local configuration path?
Maybe the files there are corrupt/deleted/missing?
Can you try to remove the following from the ebusd launch?
Alternatively replace it with "--configpath=https://cfg.ebusd.eu/"
--configpath=/config/ebusd-configuration/latest/en
from ebusd.
apbarratt
commented on September 22, 2024
Thanks @munkien, it's good to know I can just link to a live link instead of having to update my repo all the time. Unfortunately this does not resolve my issues as a vaillant file prefixed with 76 simply does not exist.
I guess my bigger concern though is why this used to work and has since stopped :/
from ebusd.
apbarratt
commented on September 22, 2024
from ebusd.
munkien
commented on September 22, 2024
Can you try to increase logging level to all:notice ? In hope that something useful is hidden?
I have a valliant boiler with a 76-config too and that seems to work.
--log=all:notice
Can you try to run the following command on your ebusd instance:
ebusctl find -a
EDIT 2:
I stand corrected. I do no have parameters from scan.76 id - Valliant VWZIO
But I have data from 08 and 15. Do you have the same numbers?
from ebusd.
apbarratt
commented on September 22, 2024
Just starting it back up with notice log level now. I'll give it about 15 minutes to get a good chunk of stuff then will investigate how to access a shell to run the find all command :)
from ebusd.
apbarratt
commented on September 22, 2024
Well that was a bad idea, turns out home assistant limits the tail of the log so I lost the beginning. Started again and this is what I'm getting:
> ebusd --foreground --mqtthost=core-mosquitto --mqttport=1883 --mqttuser=addons --mqttpass=ge9fashooM5eiraeja9ohr6oo8jaegood5igh3eeghahkobei4pai1odie2eichu --scanconfig --mqttjson --configpath=https://cfg.ebusd.eu/ --latency=10 --accesslevel=* --pollinterval=5 --mqttint=/config/ebusd/mqtt-hassio.cfg --mqtttopic=ebusd --device=ens:192.168.1.155:9999 --log=all:notice
2023-10-23 11:22:35.668 [main notice] ebusd 23.2.p20230716 started with auto scan on device: 192.168.1.155:9999, enhanced
2023-10-23 11:22:38.408 [bus notice] device status: resetting
2023-10-23 11:22:38.410 [bus notice] bus started with own address 31/36
2023-10-23 11:22:38.430 [bus notice] signal acquired
2023-10-23 11:22:38.746 [mqtt notice] connection established
2023-10-23 11:22:39.000 [bus notice] device status: reset, supports info
2023-10-23 11:22:39.038 [bus notice] device status: extra info: firmware 1.1[3a0f].1[3a0f], jumpers 0x0f
2023-10-23 11:22:41.442 [bus notice] new master 10, master count 2
2023-10-23 11:22:41.491 [bus notice] new master 03, master count 3
2023-10-23 11:22:41.491 [update notice] received unknown MS cmd: 1008b5110101 / 0913120080ffff0000ff
2023-10-23 11:22:41.758 [bus notice] new master 71, master count 4
2023-10-23 11:22:41.758 [update notice] received unknown MS cmd: 1076b5110101 / 09ffff0080ff6c000019
2023-10-23 11:22:41.856 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:22:42.081 [update notice] received unknown MS cmd: 1076b512030f0201 / 07620300c900ff03
2023-10-23 11:22:42.336 [update notice] received unknown MS cmd: 1008b51009000000ffffff070000 / 0101
2023-10-23 11:22:42.600 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2023-10-23 11:22:45.281 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:22:46.161 [update notice] received unknown MS cmd: 0376b51206130011000006 / 0200ff
2023-10-23 11:22:47.154 [update notice] received unknown MS cmd: 7108b51a03048f32 / 0e8f07c0cfc07b3c00901b20000000
2023-10-23 11:22:47.538 [update notice] received unknown MS cmd: 7108b51a03049033 / 0e900000c083030000000000000000
2023-10-23 11:22:47.919 [update notice] received unknown MS cmd: 7108b51a03049134 / 0e91cf2000c0022101001800061800
2023-10-23 11:22:48.347 [update notice] received unknown MS cmd: 7108b51a03049235 / 0e9200000000000100900100000000
2023-10-23 11:22:48.558 [main error] scan config 08: ERR: SYN received
2023-10-23 11:22:48.843 [update notice] received unknown MS cmd: 7108b51a03049336 / 0e9300000000000000000000000000
2023-10-23 11:22:49.290 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:22:50.802 [bus notice] scan 15: ;Vaillant;BASV2;0562;6304
2023-10-23 11:22:50.802 [update notice] store 15 ident: done
2023-10-23 11:22:50.802 [update notice] sent scan-read scan.15 QQ=31: Vaillant;BASV2;0562;6304
2023-10-23 11:22:50.802 [bus notice] scan 15: ;Vaillant;BASV2;0562;6304
2023-10-23 11:22:51.380 [update notice] received unknown MS cmd: 1008b5110101 / 0913120080ffff0000ff
2023-10-23 11:22:51.535 [main notice] read common config file vaillant/broadcast.csv
2023-10-23 11:22:51.652 [update notice] received unknown MS cmd: 1076b5110101 / 09ffff0080ff6c000019
2023-10-23 11:22:51.708 [main notice] read common config file vaillant/scan.csv
2023-10-23 11:22:51.880 [main notice] read common config file vaillant/general.csv
2023-10-23 11:22:51.913 [update notice] received unknown MS cmd: 1076b512030f0201 / 07620300c900ff03
2023-10-23 11:22:52.131 [main notice] read scan config file vaillant/15.basv.csv for ID "basv2", SW0562, HW6304
2023-10-23 11:22:52.175 [update notice] received unknown MS cmd: 1008b51009000000ffffff070000 / 0101
2023-10-23 11:22:52.335 [main notice] found messages: 457 (0 conditional on 0 conditions, 0 poll, 8 update)
2023-10-23 11:22:52.443 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2023-10-23 11:22:52.651 [update notice] sent unknown MS cmd: 3115b5090124 / 09003231323234363030
2023-10-23 11:22:52.761 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:22:52.950 [update notice] sent scan-read scan.15 id QQ=31:
2023-10-23 11:22:53.011 [bus notice] max. symbols per second: 113
2023-10-23 11:22:53.226 [update notice] sent scan-read scan.15 id QQ=31:
2023-10-23 11:22:53.515 [update notice] sent scan-read scan.15 id QQ=31: 21;22;46;0020262148;0082;022846;N2
2023-10-23 11:22:53.515 [bus notice] scan 15: ;21;22;46;0020262148;0082;022846;N2
2023-10-23 11:22:54.151 [update notice] received unknown MS cmd: 0376b51206130011000006 / 0200ff
2023-10-23 11:22:54.911 [update notice] sent poll-read basv AdaptHeatCurve QQ=31: no
2023-10-23 11:22:55.790 [bus notice] scan 76: ;Vaillant;VWZIO;0202;0103
2023-10-23 11:22:55.790 [update notice] store 76 ident: done
2023-10-23 11:22:55.790 [update notice] sent scan-read scan.76 QQ=31: Vaillant;VWZIO;0202;0103
2023-10-23 11:22:55.791 [bus notice] scan 76: ;Vaillant;VWZIO;0202;0103
2023-10-23 11:22:56.090 [update notice] sent unknown MS cmd: 3176b5090124 / 09003231323234333030
2023-10-23 11:22:56.255 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:22:56.288 [main error] scan config 76: ERR: SYN received
2023-10-23 11:22:59.649 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:23:00.351 [update notice] sent poll-read basv DisplayedOutsideTemp QQ=31: 6
2023-10-23 11:23:01.285 [update notice] received unknown MS cmd: 1008b5110101 / 0913130080ffff0000ff
2023-10-23 11:23:01.549 [update notice] received unknown MS cmd: 1076b5110101 / 09ffff0080ff6c000019
2023-10-23 11:23:01.818 [update notice] received unknown MS cmd: 1076b512030f0201 / 07620300c900ff03
2023-10-23 11:23:02.078 [update notice] received unknown MS cmd: 1008b51009000000ffffff070000 / 0101
2023-10-23 11:23:02.160 [update notice] received unknown MS cmd: 0376b51206130011000006 / 0200ff
2023-10-23 11:23:02.377 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2023-10-23 11:23:03.091 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:23:06.371 [update notice] sent poll-read basv Hc1ActualFlowTempDesired QQ=31: 0.0
2023-10-23 11:23:06.520 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:23:08.560 [bus notice] scan 08: ;Vaillant;HMU00;0607;5103
2023-10-23 11:23:08.560 [update notice] store 08 ident: done
2023-10-23 11:23:08.560 [update notice] sent scan-read scan.08 QQ=31: Vaillant;HMU00;0607;5103
2023-10-23 11:23:08.560 [bus notice] scan 08: ;Vaillant;HMU00;0607;5103
2023-10-23 11:23:08.867 [update notice] sent unknown MS cmd: 3108b5090124 / 09003231323233393030
2023-10-23 11:23:09.296 [update notice] sent scan-read scan.08 id QQ=31:
2023-10-23 11:23:09.428 [main error] scan config 08: ERR: wrong symbol received
2023-10-23 11:23:10.148 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:23:10.255 [update notice] received unknown MS cmd: 0376b51206130011000006 / 0200ff
2023-10-23 11:23:11.186 [update notice] received unknown MS cmd: 1008b5110101 / 0913130080ffff0000ff
2023-10-23 11:23:11.446 [update notice] received unknown MS cmd: 1076b5110101 / 09ffff0080ff6c000019
2023-10-23 11:23:11.712 [update notice] sent scan-read scan.76 id QQ=31:
2023-10-23 11:23:12.000 [update notice] sent scan-read scan.76 id QQ=31:
2023-10-23 11:23:12.117 [update notice] received unknown MS cmd: 1076b512030f0201 / 07610300c900ff03
2023-10-23 11:23:12.342 [update notice] sent scan-read scan.76 id QQ=31:
2023-10-23 11:23:12.614 [update notice] sent scan-read scan.76 id QQ=31: 21;22;43;0010031644;0082;011034;N6
2023-10-23 11:23:12.614 [bus notice] scan 76: ;21;22;43;0010031644;0082;011034;N6
2023-10-23 11:23:12.752 [update notice] received unknown MS cmd: 1008b51009000000ffffff070000 / 0101
2023-10-23 11:23:12.784 [main error] unable to load scan config 76: no file from vaillant with prefix 76 found
2023-10-23 11:23:12.784 [main error] scan config 76: ERR: element not found
2023-10-23 11:23:13.030 [update notice] sent poll-read basv Hc1AutoOffMode QQ=31: night
2023-10-23 11:23:13.268 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2023-10-23 11:23:13.400 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:23:16.830 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:23:18.581 [bus error] poll basv Hc1ExcessTemp failed: ERR: read timeout
2023-10-23 11:23:20.301 [update notice] received unknown MS cmd: 7108b5110107 / 0a000000c0003300000000
2023-10-23 11:23:21.090 [update notice] received unknown MS cmd: 1008b5110101 / 0913130080ffff0000ff
2023-10-23 11:23:21.362 [update notice] received unknown MS cmd: 1076b5110101 / 09ffff0080ff6c000019
2023-10-23 11:23:21.625 [update notice] received unknown MS cmd: 1076b512030f0201 / 07620300c900ff03
from ebusd.
apbarratt
commented on September 22, 2024
Right, here's the find all from the docker shell:
2ad9b828-ebusd:/# ebusctl find -a
basv AdaptHeatCurve = no
basv AdaptHeatCurve = no data stored
basv BankHolidayEndPeriod = no data stored
basv BankHolidayEndPeriod = no data stored
basv BankHolidayStartPeriod = no data stored
basv BankHolidayStartPeriod = no data stored
basv ccTimer.Friday = no data stored
basv ccTimer.Friday = no data stored
basv ccTimer.Monday = no data stored
basv ccTimer.Monday = no data stored
basv ccTimer.Saturday = no data stored
basv ccTimer.Saturday = no data stored
basv ccTimer.Sunday = no data stored
basv ccTimer.Sunday = no data stored
basv ccTimer.Thursday = no data stored
basv ccTimer.Thursday = no data stored
basv ccTimer.Tuesday = no data stored
basv ccTimer.Tuesday = no data stored
basv ccTimer.Wednesday = no data stored
basv ccTimer.Wednesday = no data stored
basv clearerrorhistory = no data stored
basv ContinuosHeating = no data stored
basv ContinuosHeating = no data stored
basv currenterror = no data stored
basv CylinderChargeHyst = no data stored
basv CylinderChargeHyst = no data stored
basv CylinderChargeOffset = no data stored
basv CylinderChargeOffset = no data stored
basv Date = no data stored
basv Date = no data stored
basv DisplayedOutsideTemp = 6.28906
basv errorhistory = no data stored
basv FrostOverRideTime = no data stored
basv FrostOverRideTime = no data stored
basv GlobalSystemOff = no data stored
basv GlobalSystemOff = no data stored
basv Hc1ActualFlowTempDesired = 0.0
basv Hc1AutoOffMode = night
basv Hc1AutoOffMode = no data stored
basv Hc1CircuitType = no data stored
basv Hc1ExcessTemp = no data stored
basv Hc1ExcessTemp = no data stored
basv Hc1FlowTemp = 12.5
basv Hc1HeatCurve = 1.2
basv Hc1HeatCurve = no data stored
basv Hc1HeatCurveAdaption = 0.0
basv Hc1MaxFlowTempDesired = 55
basv Hc1MaxFlowTempDesired = no data stored
basv Hc1MinFlowTempDesired = 15
basv Hc1MinFlowTempDesired = no data stored
basv Hc1MixerMovement = no data stored
basv Hc1PumpStatus = 0
basv Hc1PumpStatus = no data stored
basv Hc1RoomTempSwitchOn = thermostat
basv Hc1RoomTempSwitchOn = no data stored
basv Hc1Status = 0
basv Hc1Status = no data stored
basv Hc1SummerTempLimit = 30
basv Hc1SummerTempLimit = no data stored
basv Hc2ActualFlowTempDesired = 0.0
basv Hc2AutoOffMode = eco
basv Hc2AutoOffMode = no data stored
basv Hc2CircuitType = no data stored
basv Hc2ExcessTemp = 0.0
basv Hc2ExcessTemp = no data stored
basv Hc2FlowTemp = -
basv Hc2HeatCurve = 0.6
basv Hc2HeatCurve = no data stored
basv Hc2HeatCurveAdaption = 0.0
basv Hc2MaxFlowTempDesired = 55
basv Hc2MaxFlowTempDesired = no data stored
basv Hc2MinFlowTempDesired = 15
basv Hc2MinFlowTempDesired = no data stored
basv Hc2MixerMovement = no data stored
basv Hc2PumpStatus = 0
basv Hc2PumpStatus = no data stored
basv Hc2RoomTempSwitchOn = off
basv Hc2RoomTempSwitchOn = no data stored
basv Hc2Status = 0
basv Hc2Status = no data stored
basv Hc2SummerTempLimit = 21
basv Hc2SummerTempLimit = no data stored
basv Hc3ActualFlowTempDesired = 0.0
basv Hc3AutoOffMode = eco
basv Hc3AutoOffMode = no data stored
basv Hc3CircuitType = no data stored
basv Hc3ExcessTemp = 0.0
basv Hc3ExcessTemp = no data stored
basv Hc3FlowTemp = -
basv Hc3HeatCurve = 0.6
basv Hc3HeatCurve = no data stored
basv Hc3HeatCurveAdaption = 0.0
basv Hc3MaxFlowTempDesired = 55
basv Hc3MaxFlowTempDesired = no data stored
basv Hc3MinFlowTempDesired = 15
basv Hc3MinFlowTempDesired = no data stored
basv Hc3MixerMovement = no data stored
basv Hc3PumpStatus = 0
basv Hc3PumpStatus = no data stored
basv Hc3RoomTempSwitchOn = off
basv Hc3RoomTempSwitchOn = no data stored
basv Hc3Status = 0
basv Hc3Status = no data stored
basv Hc3SummerTempLimit = 21
basv Hc3SummerTempLimit = no data stored
basv HcStorageTempBottom = no data stored
basv HcStorageTempTop = -
basv HolidayEndPeriod = no data stored
basv HolidayEndPeriod = no data stored
basv HolidayStartPeriod = no data stored
basv HolidayStartPeriod = no data stored
basv HolidayTemp = (ERR: invalid position for 3115b52406020000008200 / 00)
basv HolidayTemp = no data stored
basv HwcBankHolidayEndPeriod = no data stored
basv HwcBankHolidayEndPeriod = no data stored
basv HwcBankHolidayStartPeriod = no data stored
basv HwcBankHolidayStartPeriod = no data stored
basv HwcFlowTemp = 0.0
basv HwcHolidayEndPeriod = no data stored
basv HwcHolidayEndPeriod = no data stored
basv HwcHolidayStartPeriod = no data stored
basv HwcHolidayStartPeriod = no data stored
basv HwcLockTime = no data stored
basv HwcLockTime = no data stored
basv HwcMaxFlowTempDesired = no data stored
basv HwcMaxFlowTempDesired = no data stored
basv HwcOpMode = auto
basv HwcOpMode = no data stored
basv HwcParallelLoading = no data stored
basv HwcParallelLoading = no data stored
basv HwcSFMode = auto
basv HwcSFMode = no data stored
basv HwcStorageTemp = 53.5
basv HwcStorageTempBottom = -
basv HwcStorageTempTop = -
basv HwcTempDesired = 60
basv HwcTempDesired = no data stored
basv hwcTimer.Friday = no data stored
basv hwcTimer.Friday = no data stored
basv hwcTimer.Monday = no data stored
basv hwcTimer.Monday = no data stored
basv hwcTimer.Saturday = no data stored
basv hwcTimer.Saturday = no data stored
basv hwcTimer.Sunday = no data stored
basv hwcTimer.Sunday = no data stored
basv hwcTimer.Thursday = no data stored
basv hwcTimer.Thursday = no data stored
basv hwcTimer.Tuesday = no data stored
basv hwcTimer.Tuesday = no data stored
basv hwcTimer.Wednesday = no data stored
basv hwcTimer.Wednesday = no data stored
basv HydraulicScheme = no data stored
basv HydraulicScheme = no data stored
basv Installer1 = no data stored
basv Installer1 = no data stored
basv Installer2 = no data stored
basv Installer2 = no data stored
basv KeyCodeforConfigMenu = no data stored
basv KeyCodeforConfigMenu = no data stored
basv MaintenanceDate = no data stored
basv MaintenanceDate = no data stored
basv MaintenanceDue = no data stored
basv ManualCooling = no data stored
basv ManualCooling = no data stored
basv MaxCylinderChargeTime = no data stored
basv MaxCylinderChargeTime = no data stored
basv MaxRoomHumidity = 40
basv MaxRoomHumidity = no data stored
basv MultiRelaySetting = no data stored
basv MultiRelaySetting = no data stored
basv noiseReductionTimer.Friday = no data stored
basv noiseReductionTimer.Friday = no data stored
basv noiseReductionTimer.Monday = no data stored
basv noiseReductionTimer.Monday = no data stored
basv noiseReductionTimer.Saturday = no data stored
basv noiseReductionTimer.Saturday = no data stored
basv noiseReductionTimer.Sunday = no data stored
basv noiseReductionTimer.Sunday = no data stored
basv noiseReductionTimer.Thursday = no data stored
basv noiseReductionTimer.Thursday = no data stored
basv noiseReductionTimer.Tuesday = no data stored
basv noiseReductionTimer.Tuesday = no data stored
basv noiseReductionTimer.Wednesday = no data stored
basv noiseReductionTimer.Wednesday = no data stored
basv OpMode = (ERR: invalid position for 3115b52406020000007b00 / 00)
basv OpMode = no data stored
basv OpModeCooling = (ERR: invalid position for 3115b52406020000007c00 / 00)
basv OpModeCooling = no data stored
basv OpModeEffect = (ERR: invalid position for 3115b52406020000006900 / 00)
basv OpModeEffect = no data stored
basv OpModeVentilation = (ERR: invalid position for 3115b52406020000001600 / 00)
basv OpModeVentilation = no data stored
basv OutsideTempAvg = 3.94141
basv OutsideTempAvg = no data stored
basv PhoneNumber1 = no data stored
basv PhoneNumber1 = no data stored
basv PhoneNumber2 = no data stored
basv PhoneNumber2 = no data stored
basv PrEnergySum = (ERR: invalid position for 3115b52406020000005c00 / 00)
basv PrEnergySum = no data stored
basv PrEnergySumHc = 38
basv PrEnergySumHc = no data stored
basv PrEnergySumHcLastMonth = 10
basv PrEnergySumHcLastMonth = no data stored
basv PrEnergySumHcThisMonth = 6
basv PrEnergySumHcThisMonth = no data stored
basv PrEnergySumHwc = 435
basv PrEnergySumHwc = no data stored
basv PrEnergySumHwcLastMonth = 86
basv PrEnergySumHwcLastMonth = no data stored
basv PrEnergySumHwcThisMonth = 61
basv PrEnergySumHwcThisMonth = no data stored
basv PrFuelSum = no data stored
basv PrFuelSum = no data stored
basv PrFuelSumHc = no data stored
basv PrFuelSumHc = no data stored
basv PrFuelSumHcLastMonth = no data stored
basv PrFuelSumHcLastMonth = no data stored
basv PrFuelSumHcThisMonth = no data stored
basv PrFuelSumHcThisMonth = no data stored
basv PrFuelSumHwc = no data stored
basv PrFuelSumHwc = no data stored
basv PrFuelSumHwcLastMonth = no data stored
basv PrFuelSumHwcLastMonth = no data stored
basv PrFuelSumHwcThisMonth = no data stored
basv PrFuelSumHwcThisMonth = no data stored
basv PumpAdditionalTime = no data stored
basv PumpAdditionalTime = no data stored
basv SFMode = (ERR: invalid position for 3115b52406020000007400 / 00)
basv SFMode = no data stored
basv SolarYieldTotal = 0
basv SolarYieldTotal = no data stored
basv SystemFlowTemp = 12.5
basv tariffTimer.Friday = no data stored
basv tariffTimer.Friday = no data stored
basv tariffTimer.Monday = no data stored
basv tariffTimer.Monday = no data stored
basv tariffTimer.Saturday = no data stored
basv tariffTimer.Saturday = no data stored
basv tariffTimer.Sunday = no data stored
basv tariffTimer.Sunday = no data stored
basv tariffTimer.Thursday = no data stored
basv tariffTimer.Thursday = no data stored
basv tariffTimer.Tuesday = no data stored
basv tariffTimer.Tuesday = no data stored
basv tariffTimer.Wednesday = no data stored
basv tariffTimer.Wednesday = no data stored
basv Time = no data stored
basv Time = no data stored
basv VentilationDay = no data stored
basv VentilationDay = no data stored
basv VentilationNight = no data stored
basv VentilationNight = no data stored
basv ventilationTimer.Friday = no data stored
basv ventilationTimer.Friday = no data stored
basv ventilationTimer.Monday = no data stored
basv ventilationTimer.Monday = no data stored
basv ventilationTimer.Saturday = no data stored
basv ventilationTimer.Saturday = no data stored
basv ventilationTimer.Sunday = no data stored
basv ventilationTimer.Sunday = no data stored
basv ventilationTimer.Thursday = no data stored
basv ventilationTimer.Thursday = no data stored
basv ventilationTimer.Tuesday = no data stored
basv ventilationTimer.Tuesday = no data stored
basv ventilationTimer.Wednesday = no data stored
basv ventilationTimer.Wednesday = no data stored
basv WaterPressure = no data stored
basv YieldTotal = 627
basv YieldTotal = no data stored
basv z1ActualRoomTempDesired = 10
basv z1ActualRoomTempDesired = no data stored
basv z1BankHolidayEndPeriod = no data stored
basv z1BankHolidayEndPeriod = no data stored
basv z1BankHolidayStartPeriod = no data stored
basv z1BankHolidayStartPeriod = no data stored
basv z1CoolingTemp = 24
basv z1CoolingTemp = no data stored
basv z1CoolingTimer.Friday = no data stored
basv z1CoolingTimer.Friday = no data stored
basv z1CoolingTimer.Monday = no data stored
basv z1CoolingTimer.Monday = no data stored
basv z1CoolingTimer.Saturday = no data stored
basv z1CoolingTimer.Saturday = no data stored
basv z1CoolingTimer.Sunday = no data stored
basv z1CoolingTimer.Sunday = no data stored
basv z1CoolingTimer.Thursday = no data stored
basv z1CoolingTimer.Thursday = no data stored
basv z1CoolingTimer.Tuesday = no data stored
basv z1CoolingTimer.Tuesday = no data stored
basv z1CoolingTimer.Wednesday = no data stored
basv z1CoolingTimer.Wednesday = no data stored
basv z1DayTemp = (ERR: invalid position for 3115b52406020003000700 / 00)
basv z1DayTemp = no data stored
basv z1HolidayEndPeriod = no data stored
basv z1HolidayEndPeriod = no data stored
basv z1HolidayStartPeriod = no data stored
basv z1HolidayStartPeriod = no data stored
basv z1HolidayTemp = 15
basv z1HolidayTemp = no data stored
basv z1Name1 = no data stored
basv z1Name1 = no data stored
basv z1Name2 = no data stored
basv z1Name2 = no data stored
basv z1NightTemp = 15
basv z1NightTemp = no data stored
basv z1OpMode = day
basv z1OpMode = no data stored
basv z1OpModeCooling = no data stored
basv z1OpModeCooling = no data stored
basv z1QuickVetoTemp = no data stored
basv z1QuickVetoTemp = no data stored
basv z1RoomTemp = no data stored
basv z1RoomZoneMapping = no data stored
basv z1RoomZoneMapping = no data stored
basv z1SFMode = no data stored
basv z1SFMode = no data stored
basv z1Shortname = no data stored
basv z1Shortname = no data stored
basv z1Timer.Friday = no data stored
basv z1Timer.Friday = no data stored
basv z1Timer.Monday = no data stored
basv z1Timer.Monday = no data stored
basv z1Timer.Saturday = no data stored
basv z1Timer.Saturday = no data stored
basv z1Timer.Sunday = no data stored
basv z1Timer.Sunday = no data stored
basv z1Timer.Thursday = no data stored
basv z1Timer.Thursday = no data stored
basv z1Timer.Tuesday = no data stored
basv z1Timer.Tuesday = no data stored
basv z1Timer.Wednesday = no data stored
basv z1Timer.Wednesday = no data stored
basv z1ValveStatus = no data stored
basv z1ValveStatus = no data stored
basv z2ActualRoomTempDesired = no data stored
basv z2ActualRoomTempDesired = no data stored
basv z2BankHolidayEndPeriod = no data stored
basv z2BankHolidayEndPeriod = no data stored
basv z2BankHolidayStartPeriod = no data stored
basv z2BankHolidayStartPeriod = no data stored
basv z2CoolingTemp = no data stored
basv z2CoolingTemp = no data stored
basv z2CoolingTimer.Friday = no data stored
basv z2CoolingTimer.Friday = no data stored
basv z2CoolingTimer.Monday = no data stored
basv z2CoolingTimer.Monday = no data stored
basv z2CoolingTimer.Saturday = no data stored
basv z2CoolingTimer.Saturday = no data stored
basv z2CoolingTimer.Sunday = no data stored
basv z2CoolingTimer.Sunday = no data stored
basv z2CoolingTimer.Thursday = no data stored
basv z2CoolingTimer.Thursday = no data stored
basv z2CoolingTimer.Tuesday = no data stored
basv z2CoolingTimer.Tuesday = no data stored
basv z2CoolingTimer.Wednesday = no data stored
basv z2CoolingTimer.Wednesday = no data stored
basv z2DayTemp = no data stored
basv z2DayTemp = no data stored
basv z2HolidayEndPeriod = no data stored
basv z2HolidayEndPeriod = no data stored
basv z2HolidayStartPeriod = no data stored
basv z2HolidayStartPeriod = no data stored
basv z2HolidayTemp = no data stored
basv z2HolidayTemp = no data stored
basv z2Name1 = no data stored
basv z2Name1 = no data stored
basv z2Name2 = no data stored
basv z2Name2 = no data stored
basv z2NightTemp = no data stored
basv z2NightTemp = no data stored
basv z2OpMode = no data stored
basv z2OpMode = no data stored
basv z2OpModeCooling = no data stored
basv z2OpModeCooling = no data stored
basv z2QuickVetoTemp = no data stored
basv z2QuickVetoTemp = no data stored
basv z2RoomTemp = no data stored
basv z2RoomZoneMapping = no data stored
basv z2RoomZoneMapping = no data stored
basv z2SFMode = no data stored
basv z2SFMode = no data stored
basv z2Shortname = no data stored
basv z2Shortname = no data stored
basv z2Timer.Friday = no data stored
basv z2Timer.Friday = no data stored
basv z2Timer.Monday = no data stored
basv z2Timer.Monday = no data stored
basv z2Timer.Saturday = no data stored
basv z2Timer.Saturday = no data stored
basv z2Timer.Sunday = no data stored
basv z2Timer.Sunday = no data stored
basv z2Timer.Thursday = no data stored
basv z2Timer.Thursday = no data stored
basv z2Timer.Tuesday = no data stored
basv z2Timer.Tuesday = no data stored
basv z2Timer.Wednesday = no data stored
basv z2Timer.Wednesday = no data stored
basv z2ValveStatus = no data stored
basv z2ValveStatus = no data stored
basv z3ActualRoomTempDesired = no data stored
basv z3ActualRoomTempDesired = no data stored
basv z3BankHolidayEndPeriod = no data stored
basv z3BankHolidayEndPeriod = no data stored
basv z3BankHolidayStartPeriod = no data stored
basv z3BankHolidayStartPeriod = no data stored
basv z3CoolingTemp = no data stored
basv z3CoolingTemp = no data stored
basv z3DayTemp = no data stored
basv z3DayTemp = no data stored
basv z3HolidayEndPeriod = no data stored
basv z3HolidayEndPeriod = no data stored
basv z3HolidayStartPeriod = no data stored
basv z3HolidayStartPeriod = no data stored
basv z3HolidayTemp = no data stored
basv z3HolidayTemp = no data stored
basv z3Name1 = no data stored
basv z3Name1 = no data stored
basv z3Name2 = no data stored
basv z3Name2 = no data stored
basv z3NightTemp = no data stored
basv z3NightTemp = no data stored
basv z3OpMode = no data stored
basv z3OpMode = no data stored
basv z3OpModeCooling = no data stored
basv z3OpModeCooling = no data stored
basv z3QuickVetoTemp = no data stored
basv z3QuickVetoTemp = no data stored
basv z3RoomTemp = no data stored
basv z3RoomZoneMapping = no data stored
basv z3RoomZoneMapping = no data stored
basv z3SFMode = no data stored
basv z3SFMode = no data stored
basv z3Shortname = no data stored
basv z3Shortname = no data stored
basv z3ValveStatus = no data stored
basv z3ValveStatus = no data stored
broadcast datetime = no data stored
broadcast error = no data stored
broadcast hwcStatus = no data stored
broadcast id = no data stored
broadcast id = no data stored
broadcast id = no data stored
broadcast load = no data stored
broadcast outsidetemp = 6.289
broadcast queryexistence = no data stored
broadcast signoflife = no data stored
broadcast vdatetime = 11:38:25;23.10.2023
broadcast vdatetime = no data stored
general valuerange = no data stored
hmu clearerrorhistory = no data stored
hmu ConsumptionThisYear10 = no data stored
hmu ConsumptionThisYear11 = no data stored
hmu ConsumptionThisYear12 = no data stored
hmu ConsumptionThisYear1 = no data stored
hmu ConsumptionThisYear2 = no data stored
hmu ConsumptionThisYear3 = no data stored
hmu ConsumptionThisYear4 = no data stored
hmu ConsumptionThisYear5 = no data stored
hmu ConsumptionThisYear6 = no data stored
hmu ConsumptionThisYear7 = no data stored
hmu ConsumptionThisYear8 = no data stored
hmu ConsumptionThisYear9 = no data stored
hmu ConsumptionTotal = no data stored
hmu CurrentCompressorUtil = no data stored
hmu CurrentConsumedPower = 0.0
hmu currenterror = no data stored
hmu CurrentYieldPower = 0.0
hmu DateTime = no data stored
hmu EnergyCool = 0
hmu EnergyHc = 0
hmu EnergyIntegral = 0
hmu errorhistory = no data stored
hmu Hours = 3984
hmu HoursCool = 0
hmu HoursHc = 3
hmu SetMode = auto;0.0;-;-;1;1;1;0;0;0
hmu State = 0;0;192;0
hmu Status01 = 9.5;9.5;-;-;-;off
hmu Status02 = (ERR: invalid position for 3108b5110102 / 00)
hmu Status16 = no data stored
hmu Status = (ERR: invalid position for 3108b5110103 / 00)
hmu StatusCirPump = on
hmu WaterThroughput = no data stored
hmu YieldThisYear10 = (ERR: invalid position for 3108b516041a010a00 / 00)
hmu YieldThisYear11 = (ERR: invalid position for 3108b516041a010b00 / 00)
hmu YieldThisYear12 = (ERR: invalid position for 3108b516041a010c00 / 00)
hmu YieldThisYear1 = (ERR: invalid position for 3108b516041a010100 / 00)
hmu YieldThisYear2 = (ERR: invalid position for 3108b516041a010200 / 00)
hmu YieldThisYear3 = (ERR: invalid position for 3108b516041a010300 / 00)
hmu YieldThisYear4 = (ERR: invalid position for 3108b516041a010400 / 00)
hmu YieldThisYear5 = (ERR: invalid position for 3108b516041a010500 / 00)
hmu YieldThisYear6 = (ERR: invalid position for 3108b516041a010600 / 00)
hmu YieldThisYear7 = (ERR: invalid position for 3108b516041a010700 / 00)
hmu YieldThisYear8 = (ERR: invalid position for 3108b516041a010800 / 00)
hmu YieldThisYear9 = (ERR: invalid position for 3108b516041a010900 / 00)
hmu YieldTotal = (ERR: invalid position for 3108b516021801 / 00)
memory eeprom = no data stored
memory eeprom = no data stored
memory ram = no data stored
memory ram = no data stored
scan id = no data stored
scan.08 = Vaillant;HMU00;0607;5103
scan.15 = Vaillant;BASV2;0562;6304
scan.15 id = 21;22;46;0020262148;0082;022846;N2
scan.76 = Vaillant;VWZIO;0202;0103
scan.76 id = 21;22;43;0010031644;0082;011034;N6
from ebusd.
apbarratt
commented on September 22, 2024
That shows all sensors etc that I was receiving before. They just don't seem to be able to get any data anymore.
from ebusd.
apbarratt
commented on September 22, 2024
Seems whatever 76 is is this thingy. This manual seems to include a big long appendix full of setting and error codes, but I don't know if those easily translate to whatever the byte code like thingies are that ebus uses :/
https://www.vaillant.co.uk/downloads/aproducts/renewables-1/arotherm-plus/appliance-interface-operating-and-installation-instructions-1799367.pdf
from ebusd.
john30
commented on September 22, 2024
if a csv is missing, then this is the wrong repo anyway. so please continue in ebusd-configuration
from ebusd.
apbarratt
commented on September 22, 2024
Hi guys, seems I figured out why my data was no longer coming through (config 76 is of course still missing but I've been able to confirm this was not the cause of the communication breakdown).
It seems that a wee while back when my ebusd_addon updated , a breaking change must have been added to the requirements of mqtt-hassio.cfg
The changes that I can see are the following:
filter-name now includes a comparison string of 'timer'
type_map-time = has changed to type_map-time = time
type_switch-w-number = gained the values number,temperature, = temp|,K$ and number,, = integral|,°min$
along with a significant number of additions for time based stuff.
By updating my mqtt-hassio.cfg to match the latest and re-editing it with the two changes I actually need, I've suddenly got my ebusd back up and running :)
I still don't seem to be able to control anything yet, but I expect that's my need for more understanding there :)
I just wanted to share this update for others who may encounter the same issue, do check to see if you've got an outdated version of mqtt-hassio.cfg as of course it will not necessarily update with the rest of the addon if you have a custom version :)
from ebusd.
Related Issues (20)
- Feature request: Accept multiple identical configuration lines that differs only for the master address HOT 1
- Connect to two network adapters using Home Assistant OS and addon
- Connect to two network adapters using Home Assistant OS and addon HOT 3
- eBUS Adapter v5, Firmware Version 2024-03-30 Kommunikationsprobleme HOT 3
- HomeAssistant integration - ebusd - measurement 'None' which is not a valid unit for the device class ('temperature') HOT 3
- All communication stopped HOT 3
- Guidance on debug level messages HOT 2
- Entities in Home Assistant have double names HOT 2
- Separate log channel for device status
- reload discards loaded config files but doesn't reload HOT 1
- Some broadcast messages are not decoded HOT 2
- can't run 2 different ebusd.service HOT 1
- ebusctl listen immediately stops when any parameter is supplied. HOT 3
- Template variable warning: 'value_json' is undefined HOT 3
- Field name containing slash (e.g. "service/time") leads to [mqtt error] received unmatchable topic HOT 3
- raspi:8889/data: SyntaxError: JSON.parse: bad control character in string literal at line 5636 column 19 of the JSON data HOT 3
- Duplictae entry in csv not reported correctly HOT 3
- Move away from csv to xml or json or yaml HOT 1
- RecoVAIR questions about connection and write BypassPosition + PreferedTemp HOT 5
- RecoVAIR SetBoostMode activate "Stoßlüften" but it canceled after 30sec HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ebusd.