Touching doesn't open cards. about nspanel-lovelace-ui HOT 9 CLOSED

Wenn du auf den dev branch wechselst, brauchst du aber auch wieder die aktuelle firmware fürs display (also die lui.tft), solltest aber ne notification auf dem display bekommen sobald du in HACS wechselst (und du wirst appdaemon neustarten müssen)

Das Problem mit der zu kleinen dose hab ich bei mir mit ner 3d gedrucken Unterputzdose gelöst, hab die Schrauben nicht gebraucht, Schrauben passen aber vermutlich eh nicht in die löcher in dem Modell. Und bei der nächsten würde ich ermutlich noch etwas machen, damit der gips außen mehr oberfläche hat um zu greifen.

from nspanel-lovelace-ui.

Could the problem be related to the new tasmota32-nspanel.bin release some hours ago?
I can't find an older version to downgrade

from nspanel-lovelace-ui.

I have the same issue on 1 of my 2 nspanels
the one running tasmota 11.0.0.3 works perfectly.
the other one ran 11.0.0.4 and I had the same issue as mentioned above.
So I treid to downgrade
https://github.com/tasmota/install/blob/0f9932c4f873318f93ecd3293e48d1ff38e2eea9/firmware/unofficial/tasmota32-nspanel.bin?raw=true
grepped this link from github, and turns out to be 11.0.0.1
but The issue persists.

My 2 nspanels have almost the same config.
the only changes are

• the name
• brightnessScreensaver
• panelRecvTopic
• panelRecvTopic

the 2nd panel, which isn't I just installed today.
here are the differences, wanted to make sure I didn't make a typo

btw,
here you can find the other versions of tasmota nspanel
https://github.com/tasmota/install/commits/main?after=6849f9f0de429e5c27677c7ddaa892fb0c91884b+69&branch=main&path%5B%5D=firmware&path%5B%5D=unofficial&path%5B%5D=tasmota32-nspanel.bin

from nspanel-lovelace-ui.

@Chreece

My guess is that you are using the lui.tft (which is always the latest from the main/devel branch) and version 1.7.3 from HACS.

Between the current release and the current development are some major changes, so the two versions doesn't work togehter.

Go to HACS click on redownload, choose main, wait a sec until HACS got it and then press download

For the current release you would need this firmware on the panel, but go with the dev version in HACS for now, some more testing before do a new release doesn't hurt :)

FlashNextion http://nspanel.pky.eu/lovelace-ui/github/nspanel-v1.7.0.tft

from nspanel-lovelace-ui.

Yes!
v1.7.3 from hacs + nspanel-v1.7.0.tft
Is the combination.
Could you add this also in the documentation for other users?
I mean, I just updated the hacs (because I got a notification), and I followed the docs to update the firmware for tft

from nspanel-lovelace-ui.

I'm normally adding it to the release notes, but not in 1.7.3, because it was only a bugfix, which did not require updating the display firmware, will do that in future too.

And yeah, docs should get some notes around the releases. I wrote them before I introduced releases, before that you always got the development version on HACS.

https://github.com/joBr99/nspanel-lovelace-ui/releases/tag/v1.7.2

from nspanel-lovelace-ui.

For me this new .tft also fixed the issue.

I used this from the manual
FlashNextion http://nspanel.pky.eu/lui.tft
I will try the dev branche later.

from nspanel-lovelace-ui.

Link in readme is now pointing to the latest release instead of latest development version

from nspanel-lovelace-ui.

I have used this adapter:
https://www.thingiverse.com/thing:5256325/files
(I'm writing in English so everybody can use this info :) )

from nspanel-lovelace-ui.