Comments (11)
There is a #define in the Makefile at https://github.com/jeelabs/esp-link/blob/master/Makefile#L119 that keeps the AP going. Set that to 'no' and build your own version and you're all set :-).
from esp-link.
Thanks for the very fast answer. :-)
And getting a secure AP is done by first flashing an AT-software, configuring the AP, then flashing ESP-link compiled with the "no"-flag set. Correct?
Then I'll just have to find a way to compile everything on Windows. ;-)
from esp-link.
Yes, that's the way you would have to do it. There is no support in esp-link for configuring the AP wifi settings.
Compilation on windows is supported, but I'm not the maintainer of that. You should ask brunnels in the gitter chat (see badge in readme.md) for help if you're having trouble.
from esp-link.
Ok, I will do so as soon as I find some spare time... In my experience it's a PITA to compile stuff like that on windows. Probably a virtual machine is the easier way.
Anyhow, I'd greatly appriciate it if you at some point in the future found the time to make configuring an AP via the website possible. ;-) I'm surprised that this use case hasn't arised before by someone else?!
Thanks again and have a nice weekend
from esp-link.
well, someone else wanted the ap mode and that's why there's the switch in the makefile. I just can't maintain an infinite number of options... The AP mode is pretty limited in a number of ways and so it's not a great solution anyhow: no power-down and no routing are two issues.
from esp-link.
I'll give it a shot as soon as I find a sufficient amount of time. :-)
Of course you can't support every user's wishes. At least there IS a possibility, even though it is not available via GUI...
I've read that AP mode is not without its problems. Unfortunately, for some (mobile) use cases it is the only possiblity as there simply are no access points around. BTW: setting up the toolchain on Windows isn't as easy as I thought. :-P Here comes the virtual machine... ;-)
from esp-link.
Hello i have been testing AP mode, first i flashed my ESP with AT firmware -aithinker- then set the specific paremeters like "AT+CWSAP="NoWorriESSID","password",3,3" and "AT+CWMODE=2" and you can finally flash esp-link firmware without blank.bin.
Its working great with this way.
I guess its not possible to use esp-link in both ends like wireless RS-232 solution?
from esp-link.
From gitter chat related to this topic:
@44simon: the esp module is visible in AP mode as a ESP_XXXX, do you know exactly in source where can I change it to for example Receiver1
I have found something like "ChipID", I suppose that is located somwhere near this in source code
Search for wifi_set_opmode(3), which turns on sta+ap mode, it's at
Line 199 in c3e1a8a
Line 309 in c3e1a8a
To set the SSID I believe you need to call wifi_softap_set_config
from esp-link.
I think, the ability to use encrypted access point with setting password through web interface is a high priority thing. Because in case when access point, which we connect to in station mode, is (temporary) unavailable we have big security problem. Also, web interface doesn't support auth (Is it so?).
I may to try add the ssid and password options and access point only mode in near time.
from esp-link.
Web interface simple HTTP auth is possible
from esp-link.
I tested esp-link-v2.2.3. Good work! I can change "SSID" and "Soft-AP Auth Mode" via "Soft-AP Settings", but finally I get two SSID: one with default ESP_**** and open autenification and second with setings with I was set in "Soft-AP Settings" (secured AP). Configuration WEB-site was opening by both AP. Is any chance to disable first AP with open auth?
I need AP with custom SSID and password.
And I try to mark checkbox "Soft-AP SSID hidden", but both SSID still visible.
from esp-link.
Related Issues (20)
- esp link not working with Comgrow Z1 laser engraver HOT 1
- Esp-link serial bridge to USB HOT 1
- How long does the reset-Pin triggered? HOT 3
- mdns stop working/resolving hostname.local after ~2.5 minutes after boot HOT 3
- TCP socket not delivery data HOT 13
- how to change soft-ap static IP and PORT? HOT 9
- ESP-link to connect a Smart Meter HOT 3
- No AP HOT 7
- 192.168.4.1 won't respond
- is stub and send flash finish HOT 2
- Issue setting baud rate to 2400 HOT 1
- Connect display
- No AP created - is stub and send flash finish HOT 1
- if your having trouble flashing (not an issue)
- Telnet
- collect2.exe: error: ld returned 1 exit status HOT 2
- RS232 to UDP or TCP HOT 5
- SNTP over serial?
- Build Failure on Ubuntu 20.04.6 LTS (/bin/sh: 1: Syntax error: "(" unexpected) HOT 1
- wlan bridge/repeater HOT 5
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from esp-link.