irshadmgs011 Goto Github PK

followers: 3.0 following: 88.0 repos: 81.0 gists: 0.0

Name: irshad ahmad

Type: User

Location: mughalsarai/india

irshad ahmad's Projects

0816-feeder-firmware

Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.

18650_charger

Arduino + TP4056 graphic batttery charger

6-axis-usbcnc-grbl

This repository is based on https://github.com/usbcnc/grbl which in turn is based on native grbl 1.1f https://github.com/gnea/grbl

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed

bigtreetech-skr-v1.1

32bit board with LPC1768, support marlin2.0 and smoothieware

bigtreetech-skr-v1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required

bigtreetech-tft35-v1.2

3.5inch Serial Port Touch Screen, Support Marlin/Smoothieware/etc..

blynk-4-channel-relay-status-sync-with-physical-button

Blynk: 4 channel relay status sync with Blynk app, Relay and with Physical button/Switch/Push button. If you perform ON/OFF with Physical Switch/Push button switch it lets you change the ON/OFF status on Blynk app as well.