Inav Version 7.1.2 Engines don't run after arming, despite 3D fix and pre-arm check everything is green about inav HOT 5 CLOSED

Now it works !

It was such a stupid mistake. I had Arming set to Ch5 and didn't realize that Autotune was also set to Ch5.

from inav.

Yes, you're right. They are the Heewing FX 1406 3150kv motors. They only have 12 magnets. I'll change it after work and test it. Thanks!

from inav.

how many magnets are there in your motor? your configuration is 14 pole, but could it be your motors have 12 magnets?

from inav.

So, now I've changed the magnets in Inav to 12, but unfortunately it doesn't change the fact that the motors don't start with the Lipo plugged in, despite the 3D fix in the pre-start, everything is green. The ESC's beep again after arming.

from inav.

Now it works !

It was such a stupid mistake. I had Arming set to Ch5 and didn't realize that Autotune was also set to Ch5.

Thank you for the update!
I'm adding this to things to check for the next person.

from inav.