Another OTA Issue about pubsubclient HOT 7 CLOSED

Sorry, it's been a while since I've made a release/tag. The 'payload_stream' method and OTA example were added since 1.99.1. I've just made a 1.99.2 release which will include everthing you should need.

from pubsubclient.

Thanks

from pubsubclient.

@Imroy Can you help me with another problem? After update OTA i've got loop.... i think problem in broker but i can't understand it.

Connecting to AirPort Extreme 2,4

WiFi connected
Hostname: meteostation.local
IP address: 10.0.1.102
Local Pressure: 750.9
Connecting to MQTT server
Connected to MQTT server
Subscribing to topic ota/10.0.1.102
Receiving OTA of 335312 bytes...
Clearing retained message.
Update Success: 12115
Rebooting...
rm 0
pm close 7 0 0/14577359
del if0
usl
sul 0 0

ets Jan 8 2013,rst cause:4, boot mode:(3,6)

wdt reset
load 0x4010f000, len 1264, room 16
tail 0
chksum 0x42
csum 0x42
@cp:0
ld

Connecting to AirPort Extreme 2,4

WiFi connected
Hostname: meteostation.local
IP address: 10.0.1.102
Local Pressure: 750.6
Connecting to MQTT server
Connected to MQTT server
Subscribing to topic ota/10.0.1.102
Receiving OTA of 335312 bytes...
Clearing retained message.
Update Success: 12062
Rebooting...
rm 0
pm close 7 0 0/14526063
del if0
usl
sul 0 0

ets Jan 8 2013,rst cause:4, boot mode:(3,6)

wdt reset
load 0x4010f000, len 1264, room 16
tail 0
chksum 0x42
csum 0x42
@cp:0
ld

from pubsubclient.

This looks like two successful OTAs to me. What's the issue?

from pubsubclient.

@igrr YES but it is in looop!!! I need using device not only update OTA ))))))))))) @igrr Эта хрень бесконечна! )

from pubsubclient.

Have you only sent the OTA message once? The sketch should be clearing the retained message once it has successfully flashed the new image.

from pubsubclient.

@Imroy Yes i sent only 1 message and when i stop mosquito broker problem is gone. i close this issue. i will use igrr ota. Thank you

from pubsubclient.