led-image-viewer doesn't work. "Crashes"? about rpi-rgb-led-matrix HOT 9 CLOSED

Can you attach the image that is breaking ?

from rpi-rgb-led-matrix.

Of course, here are two of them.

P.S. I would like to use led-image-viewer only to display static images, not for gifs. But even pngs etc. don't work

from rpi-rgb-led-matrix.

I'm having this same issue. Tried all sorts of image formats, sizes, shapes, etc.

I get the below every time just with the scale line changed to match whatever image I'm trying to use.

Read image...
Scale ... 500x32 -> 32x32
Preprocess for display.
Display.

Nothing on the display, not even a flicker. Program exits and I'm left with the command prompt.

Raspberry Pi 2 B v1.1
Running fresh install of Raspbian
Debian Wheezy
Release date: 2015-05-05
with all dependencies listed in your readme installed. Nothing extra over a default install.
4GB Class 4 SanDisk Micro SD card

./led-matrix runs perfectly with all included demos and any correctly formatted .ppm image

from rpi-rgb-led-matrix.

Should be fixed now, can you try again ?

from rpi-rgb-led-matrix.

It is now working for me. Thanks for fixing it so quickly.

from rpi-rgb-led-matrix.

That fixed my issue but now I cannot get the display to stop without killing the process

from rpi-rgb-led-matrix.

On 21 June 2015 at 19:08, Blevo90 [email protected] wrote:

That fixed my issue but now I cannot get the display to stop without
killing the process

Ctrl-C doesn't work ?

from rpi-rgb-led-matrix.

yes it does but I am a newbie to linux and the other program says what to
do this one did not. A friend clued me to the ctrl+c
On Jun 21, 2015 9:13 PM, "Henner Zeller" [email protected] wrote:

On 21 June 2015 at 19:08, Blevo90 [email protected] wrote:

That fixed my issue but now I cannot get the display to stop without
killing the process

Ctrl-C doesn't work ?

—
Reply to this email directly or view it on GitHub
#32 (comment)
.

from rpi-rgb-led-matrix.

On 21 June 2015 at 20:18, Blevo90 [email protected] wrote:

yes it does but I am a newbie to linux and the other program says what to
do this one did not. A friend clued me to the ctrl+c

Yes, they are inconsistent. The other demo programs don't get shut down
properly on Ctrl-C, they do return.
I'll make these conistent soon.

from rpi-rgb-led-matrix.