ltchiptool upload error "Not a valid FlashMode" about ginlong-solis HOT 2 CLOSED

Don't know what 'Not a valid FlashMode' means, you'll have to ask the ltchiptool maintainers. I never experienced that kind of error.

Maybe it's an option to flash the XIP binaries (choose 'Download OTA1/2 XIP image' within ESPHome) like this (not tested at all!):

$ ltchiptool flash write -d /dev/ttyUSB0 -f realtek-ambz -s 0xb000 solis-emw3080-0x00B000.bin
$ ltchiptool flash write -d /dev/ttyUSB0 -f realtek-ambz -s 0x100000 solis-emw3080-0x100000.bin

from ginlong-solis.

Don't know what 'Not a valid FlashMode' means, you'll have to ask the ltchiptool maintainers. I never experienced that kind of error.

Maybe it's an option to flash the XIP binaries (choose 'Download OTA1/2 XIP image' within ESPHome) like this (not tested at all!):

$ ltchiptool flash write -d /dev/ttyUSB0 -f realtek-ambz -s 0xb000 solis-emw3080-0x00B000.bin
$ ltchiptool flash write -d /dev/ttyUSB0 -f realtek-ambz -s 0x100000 solis-emw3080-0x100000.bin

Hello. Thank you for the reply! I had tried flashing using this method, but it didn't work properly. After multiple attempts, I rewrote the original dump, but it also failed. After several rounds of testing, I found that I needed to write:

1st original dump,
2nd solis-emw3080-0x100000.bin,
3rd solis-emw3080-0x00B000.bin.

Now it is working :)

I also need to mention that the firmware didn't find and connect to hidden networks; it only connects to networks that broadcast SSID

from ginlong-solis.