Pocket gcode path overflow about heekscad HOT 6 OPEN

Oh okay - so needed to zip the heeks file to get it to attach, it is attached here
Thanks
Mike

z_ball_screw_mount_plate.heeks.zip

from heekscad.

Mike, just tried your zip file with v1.4.0 on lubuntu 18.04. Clicked G0 and code generated with no errors.
Phil.

from heekscad.

Hi Phil;
Thanks for taking a look at this. So yours works and mine doesn't. Is there something I can do to check my install. Maybe make sure I have all the right versions of heeks and dependent libraries, etc.

Thanks
Mike

from heekscad.

Not sure how to check apart from the Help,About display - mine shows 1.4.0. Can't remember exactly how I installed it on lubuntu but think it was a combination of Synaptic Package Manager and/or the add-apt-repository... and apt-get... commands as shown here https://launchpad.net/~neomilium/+archive/ubuntu/cam

from heekscad.

Looks like your a version ahead of mine. Not seen this sight either. Looks like i'm gonna be updating my app when I get the time. I'll post the result after.

Fyi; My notes indicate I had installed via apt-get following this sight
https://github.com/Heeks/heekscnc/wiki/Getting-HeeksCNC-for-Linux
sudo add-apt-repository ppa:neomilium/heekscnc-devel
sudo apt-get update
sudo apt-get install heekscnc

Thanks
Mike

from heekscad.

Ok Mike - sounds like you're better organised than me! I've got references to 'ppa.launchpad.net/neomilium/heekscnc-devel/ubuntu bionic InRelease' when I do a sudo apt-get update, so this suggests I must have followed the ubuntu 18.04 instructions. I mainly use the Windows 1.4 version as my target Mach3 runs on an old Windows XP computer, but I have the lubuntu version on a laptop for armchair 'learning' - only made my first 'cut' this week :) Let me know how you get on.

from heekscad.