Comments (29)
small debug session on my broken install, conclusions:
- the mongod logfile is not shown in the addon output
- same for the /data/unifi/logs/server.log
- mongodb cannot startup
unifi complains in the log that mongod crashes
mongod complains that it cannot initialize the db due to not enough space in disk, this was not true but is a mongodb issue.
adding unifi.db.extraargs=--smallfiles
in /data/unifi/data/system.properties
let mongodb start without preallocating ±3gb of diskspace and unifi starts normaly after this
from addon-unifi.
We've found an HA project member that was able to reproduce the issue.
We are going to see if we can find out what is causing this.
from addon-unifi.
👋 Thanks for opening your first issue here! If you're reporting a 🐛 bug, please make sure you include steps to reproduce it. Also, logs, error messages and information about your hardware might be usefull.
from addon-unifi.
I'm having the same issue.
UniFi Controller - 0.4.0
HassOS - 1.12
ha - 0.81.6
from addon-unifi.
I'm also getting the same issue.
Fresh install of everything.
UniFi Controller v0.4.0
HassOS: 1.12
HA:0.81.6
Nothing in the logs that say anything about an issue.
from addon-unifi.
Hi,
I am having the same issue. If I can provide more debug logs, I would gladly help so please inform me how. This is the log from inside Home Assistant.
Debug log.txt
I run hassio on a Debian system and it actually worked great, it even autoupdated to version 0.4.0 and still ran. I had to turn my server off to move it to another location and to move some cables and it did't start anymore since that.
I have access via SSH to my system, but then I have the Hassio commands, if debugging is needed further I can always attach a monitor to my server and do debugging on there (I can handle some Linux, but I think it runs in docker so I might need some help with that).
from addon-unifi.
Hi, I can't provide any debugging logs anymore as the update to 0.82.1 fixed the issue for me. The controller boots again without issues, so it looks like it was more a Home Assistant issue then a Unify issue. Only sad that the logs never showed why it wasn't working, that could have brought up the issue sooner.
from addon-unifi.
I freshly installed everything and it hangs at startup with the following tested scenario:
UniFi Controller v.0.40
HassOS: 1.13, 2.4
HA: 0.84.4, 0.84.5, 0.84.6
Infrastructure Details
ESXi 6.7 Update 1
VM Settings:
- NW E1000e
- Disk IDE / Master
- Firmware EFI
- GuestOS: Other 4.x Linux 64Bit
tested HassOS
- 1.12 https://github.com/home-assistant/hassos/releases/download/1.12/hassos_ova-1.12.vmdk
- 1.13 https://github.com/home-assistant/hassos/releases/download/1.13/hassos_ova-1.13.vmdk.gz
- 2.4 https://github.com/home-assistant/hassos/releases/download/2.4/hassos_ova-2.4.vmdk.gz
No issues logged as i can see..
Config
{
"log_level": "debug",
"ssl": false,
"certfile": "fullchain.pem",
"keyfile": "privkey.pem"
}
Output
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 00-banner.sh: executing...
-----------------------------------------------------------
Hass.io Add-on: UniFi Controller v0.4.0
Manage your UniFi network using a web browser
From: Community Hass.io Add-ons
By: Franck Nijhof <[email protected]>
-----------------------------------------------------------
amd64 / HassOS 1.13 / HA 0.84.6 / SU 141 / stable
-----------------------------------------------------------
[cont-init.d] 00-banner.sh: exited 0.
[cont-init.d] 01-log-level.sh: executing...
Log level is set to DEBUG
[cont-init.d] 01-log-level.sh: exited 0.
[cont-init.d] 02-updates.sh: executing...
DEBUG: Requested API resource: http://hassio/supervisor/ping
DEBUG: API HTTP Response code: 200
DEBUG: API Response: {"result": "ok", "data": {}}
DEBUG: Requested API resource: http://hassio/addons/self/info
DEBUG: API HTTP Response code: 200
DEBUG: API Response: {"result": "ok", "data": {"name": "UniFi Controller", "slug": "a0d7b954_unifi", "description": "Manage your UniFi network using a web browser", "long_description": "# Community Hass.io Add-ons: UniFi Controller\n\n[![Release][release-shield]][release] ![Project Stage][project-stage-shield] ![Project Maintenance][maintenance-shield]\n\n[![Discord][discord-shield]][discord] [![Community Forum][forum-shield]][forum]\n\n[![Buy me a coffee][buymeacoffee-shield]][buymeacoffee]\n\n[![Support my work on Patreon][patreon-shield]][patreon]\n\nThe UniFi Controller allows you to manage your UniFi network\nusing a web browser.\n\n## About\n\nThis add-on runs Ubiquiti Networks' UniFi Controller software, which allows\nyou to manage your UniFi network via the web browser. The add-on provides a\nsingle-click installation and run solution for Hass.io, allowing users to get\ntheir network up, running, and updated, easily.\n\nThis add-on supports all Hass.io supported architectures, including the\nRaspberry Pi.\n\n[Click here for the full documentation][docs]\n\n![UniFi Controller][screenshot]\n\n[buymeacoffee-shield]: https://www.buymeacoffee.com/assets/img/guidelines/download-assets-sm-2.svg\n[buymeacoffee]: https://www.buymeacoffee.com/frenck\n[discord-shield]: https://img.shields.io/discord/478094546522079232.svg\n[discord]: https://discord.me/hassioaddons\n[docs]: https://github.com/hassio-addons/addon-unifi/blob/v0.4.0/README.md\n[forum-shield]: https://img.shields.io/badge/community-forum-brightgreen.svg\n[forum]: https://community.home-assistant.io/t/community-hass-io-add-on-unifi-controller/56297?u=frenck\n[maintenance-shield]: https://img.shields.io/maintenance/yes/2018.svg\n[patreon-shield]: https://www.frenck.nl/images/patreon.png\n[patreon]: https://www.patreon.com/frenck\n[project-stage-shield]: https://img.shields.io/badge/project%20stage-experimental-yellow.svg\n[release-shield]: https://img.shields.io/badge/version-v0.4.0-blue.svg\n[release]: https://github.com/hassio-addons/addon-unifi/tree/v0.4.0\n[screenshot]: https://github.com/hassio-addons/addon-unifi/raw/master/images/screenshot.jpg", "version": "0.4.0", "auto_update": true, "repository": "a0d7b954", "last_version": "0.4.0", "state": "started", "protected": true, "rating": 5, "boot": "auto", "options": {"log_level": "debug", "ssl": false, "certfile": "fullchain.pem", "keyfile": "privkey.pem"}, "arch": ["aarch64", "amd64", "armhf", "i386"], "machine": ["intel-nuc", "odroid-c2", "odroid-xu", "orangepi-prime", "qemux86", "qemux86-64", "qemuarm", "qemuarm-64", "raspberrypi", "raspberrypi2", "raspberrypi3", "raspberrypi3-64", "tinker"], "url": "https://community.home-assistant.io/t/community-hass-io-add-on-unifi-controller/56297?u=frenck", "detached": false, "available": true, "build": false, "network": {"1900/udp": 1900, "3478/udp": 3478, "6789/tcp": 6789, "8080/tcp": 8080, "8443/tcp": 8443, "8843/tcp": 8843, "8880/tcp": 8880, "10001/udp": 10001}, "host_network": false, "host_pid": false, "host_ipc": false, "host_dbus": false, "privileged": [], "full_access": false, "apparmor": "default", "devices": null, "icon": true, "logo": true, "changelog": true, "webui": "https://[HOST]:8443", "stdin": false, "hassio_api": true, "hassio_role": "default", "auth_api": false, "homeassistant_api": false, "gpio": false, "devicetree": false, "docker_api": false, "audio": false, "audio_input": null, "audio_output": null, "services": [], "discovery": []}}
DEBUG: Filtering response using: .version
DEBUG: Requested API resource: http://hassio/addons/self/info
DEBUG: API HTTP Response code: 200
DEBUG: API Response: {"result": "ok", "data": {"name": "UniFi Controller", "slug": "a0d7b954_unifi", "description": "Manage your UniFi network using a web browser", "long_description": "# Community Hass.io Add-ons: UniFi Controller\n\n[![Release][release-shield]][release] ![Project Stage][project-stage-shield] ![Project Maintenance][maintenance-shield]\n\n[![Discord][discord-shield]][discord] [![Community Forum][forum-shield]][forum]\n\n[![Buy me a coffee][buymeacoffee-shield]][buymeacoffee]\n\n[![Support my work on Patreon][patreon-shield]][patreon]\n\nThe UniFi Controller allows you to manage your UniFi network\nusing a web browser.\n\n## About\n\nThis add-on runs Ubiquiti Networks' UniFi Controller software, which allows\nyou to manage your UniFi network via the web browser. The add-on provides a\nsingle-click installation and run solution for Hass.io, allowing users to get\ntheir network up, running, and updated, easily.\n\nThis add-on supports all Hass.io supported architectures, including the\nRaspberry Pi.\n\n[Click here for the full documentation][docs]\n\n![UniFi Controller][screenshot]\n\n[buymeacoffee-shield]: https://www.buymeacoffee.com/assets/img/guidelines/download-assets-sm-2.svg\n[buymeacoffee]: https://www.buymeacoffee.com/frenck\n[discord-shield]: https://img.shields.io/discord/478094546522079232.svg\n[discord]: https://discord.me/hassioaddons\n[docs]: https://github.com/hassio-addons/addon-unifi/blob/v0.4.0/README.md\n[forum-shield]: https://img.shields.io/badge/community-forum-brightgreen.svg\n[forum]: https://community.home-assistant.io/t/community-hass-io-add-on-unifi-controller/56297?u=frenck\n[maintenance-shield]: https://img.shields.io/maintenance/yes/2018.svg\n[patreon-shield]: https://www.frenck.nl/images/patreon.png\n[patreon]: https://www.patreon.com/frenck\n[project-stage-shield]: https://img.shields.io/badge/project%20stage-experimental-yellow.svg\n[release-shield]: https://img.shields.io/badge/version-v0.4.0-blue.svg\n[release]: https://github.com/hassio-addons/addon-unifi/tree/v0.4.0\n[screenshot]: https://github.com/hassio-addons/addon-unifi/raw/master/images/screenshot.jpg", "version": "0.4.0", "auto_update": true, "repository": "a0d7b954", "last_version": "0.4.0", "state": "started", "protected": true, "rating": 5, "boot": "auto", "options": {"log_level": "debug", "ssl": false, "certfile": "fullchain.pem", "keyfile": "privkey.pem"}, "arch": ["aarch64", "amd64", "armhf", "i386"], "machine": ["intel-nuc", "odroid-c2", "odroid-xu", "orangepi-prime", "qemux86", "qemux86-64", "qemuarm", "qemuarm-64", "raspberrypi", "raspberrypi2", "raspberrypi3", "raspberrypi3-64", "tinker"], "url": "https://community.home-assistant.io/t/community-hass-io-add-on-unifi-controller/56297?u=frenck", "detached": false, "available": true, "build": false, "network": {"1900/udp": 1900, "3478/udp": 3478, "6789/tcp": 6789, "8080/tcp": 8080, "8443/tcp": 8443, "8843/tcp": 8843, "8880/tcp": 8880, "10001/udp": 10001}, "host_network": false, "host_pid": false, "host_ipc": false, "host_dbus": false, "privileged": [], "full_access": false, "apparmor": "default", "devices": null, "icon": true, "logo": true, "changelog": true, "webui": "https://[HOST]:8443", "stdin": false, "hassio_api": true, "hassio_role": "default", "auth_api": false, "homeassistant_api": false, "gpio": false, "devicetree": false, "docker_api": false, "audio": false, "audio_input": null, "audio_output": null, "services": [], "discovery": []}}
DEBUG: Filtering response using: .last_version
INFO: You are running the latest version of this add-on
[cont-init.d] 02-updates.sh: exited 0.
[cont-init.d] 10-requirements.sh: executing...
[cont-init.d] 10-requirements.sh: exited 0.
[cont-init.d] 50-persist-data.sh: executing...
[cont-init.d] 50-persist-data.sh: exited 0.
[cont-init.d] 60-ssl.sh: executing...
[cont-init.d] 60-ssl.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
INFO: Starting the UniFi Controller
[services.d] done.
from addon-unifi.
Okay it seems to be a problem with hassos OVA Files.
Tested all above stated + .vhdx on a hyper-v
When i install an Ubuntu 18.04 with docker and Hass.io it worked with HA 83.3 > updated to 84.6 and it worked also.
from addon-unifi.
Could be a missing kernel module/options?
from addon-unifi.
Hard to tell @pvizeli, since, well, no output anywhere.
from addon-unifi.
Same issue here.
However, after installing, it will run the first and only time before configuring. When the wizard has been completed it won't start up again.
After the wizard I noticed it wouldn't scan for devices anymore in the controller itself. Therefore I tried to restart it without succeeding.
Running:
Hostname hassio
System HassOS 1.13
Deployment production
Running at Rpi 3b +
Reproduce:
Uninstall Unifi
Install Unifi
Launch Unifi
Follow Wizard and guide https://community.home-assistant.io/t/community-hass-io-add-on-unifi-controller/56297?u=frenck
Restart
Stuck at starting
Website shows the Information symbol with the text:
"UniFi Controller is starting up..."
After configuring it gets stuck.
I tried stop and start without configuring (following the guide) and then I could restart it.
Got this message at first run after install:
OpenJDK Client VM warning: You have loaded library /usr/lib/unifi/lib/native/Linux/armv7/libubnt_webrtc_jni.so which might have disabled stack guard. The VM will try to fix the stack guard now.
It's highly recommended that you fix the library with 'execstack -c ', or link it with '-z noexecstack'.
Config
{ "log_level": "info", "ssl": false, "certfile": "fullchain.pem", "keyfile": "privkey.pem" }
Log
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 00-banner.sh: executing...
-----------------------------------------------------------
Hass.io Add-on: UniFi Controller v0.4.0
Manage your UniFi network using a web browser
From: Community Hass.io Add-ons
By: Franck Nijhof <[email protected]>
-----------------------------------------------------------
armhf / HassOS 1.13 / HA 0.84.6 / SU 141 / stable
-----------------------------------------------------------
[cont-init.d] 00-banner.sh: exited 0.
[cont-init.d] 01-log-level.sh: executing...
Log level is set to INFO
[cont-init.d] 01-log-level.sh: exited 0.
[cont-init.d] 02-updates.sh: executing...
INFO: You are running the latest version of this add-on
[cont-init.d] 02-updates.sh: exited 0.
[cont-init.d] 10-requirements.sh: executing...
[cont-init.d] 10-requirements.sh: exited 0.
[cont-init.d] 50-persist-data.sh: executing...
[cont-init.d] 50-persist-data.sh: exited 0.
[cont-init.d] 60-ssl.sh: executing...
[cont-init.d] 60-ssl.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] done.
INFO: Starting the UniFi Controller
OpenJDK Client VM warning: You have loaded library /usr/lib/unifi/lib/native/Linux/armv7/libubnt_webrtc_jni.so which might have disabled stack guard. The VM will try to fix the stack guard now.
It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'.
from addon-unifi.
I am getting the same issue.
HassOS 1.13
Hass.io supervisor 141
HA 0.84.6
Deployment production
Raspberry Pi 3b+
It starts up the first time. Then once I restore from a backup it restarts and is on the "UniFi Controller is starting up..." screen forever. I tried all day yesterday to get it working. Strangely enough, I restarted the controller this morning and it started working. Then I after another restart it got stuck again. There was no difference in the logs between restarts. I haven't posted the logs because it is the same as above, even at debug level. Let me know if I can extract some more logs for you.
from addon-unifi.
AppArmor? Do you see any things inside dmesg?
EDIT:
After chatting with Frenk, that doesn't help...
from addon-unifi.
I don't think there is anything in dmesg
that looks like the culprit. It looks like its just messages about the docker networking getting configured when the container boots. However, I'm not good at reading iptables audit messages so I'll post it here anyway.
This is the output of dmesg
after trying to start the configured controller again (it doesn't start):
[189787.197414] hassio: port 4(veth4aacdcb) entered blocking state
[189787.199027] hassio: port 4(veth4aacdcb) entered disabled state
[189787.200746] device veth4aacdcb entered promiscuous mode
[189787.202549] kauditd_printk_skb: 65 callbacks suppressed
[189787.202555] audit: type=1700 audit(1546513809.301:1295): dev=veth4aacdcb prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[189787.208830] audit: type=1300 audit(1546513809.301:1295): arch=40000028 syscall=290 per=800000 success=yes exit=40 a0=c a1=13644630 a2=28 a3=0 items=0 ppid=1 pid=322 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="dockerd" exe="/usr/bin/dockerd" key=(null)
[189787.211148] IPv6: ADDRCONF(NETDEV_UP): veth4aacdcb: link is not ready
[189787.216563] audit: type=1327 audit(1546513809.301:1295): proctitle=2F7573722F62696E2F646F636B657264002D480066643A2F2F002D2D73746F726167652D6472697665723D6F7665726C617932002D2D6C6F672D6472697665723D6A6F75726E616C64
[189787.274075] audit: type=1325 audit(1546513809.381:1296): table=nat family=2 entries=21
[189787.277265] audit: type=1300 audit(1546513809.381:1296): arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=0 a2=40 a3=6181f8 items=0 ppid=322 pid=19216 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-multi" key=(null)
[189787.284066] audit: type=1327 audit(1546513809.381:1296): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D74006E6174002D4100444F434B4552002D7000756470002D6400302F30002D2D64706F7274003130303031002D6A00444E4154002D2D746F2D64657374696E6174696F6E003137322E33302E33332E323A31303030310000002D690068617373696F
[189787.297320] audit: type=1325 audit(1546513809.401:1297): table=filter family=2 entries=33
[189787.300904] audit: type=1300 audit(1546513809.401:1297): arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=0 a2=40 a3=1c5beb0 items=0 ppid=322 pid=19218 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-multi" key=(null)
[189787.308719] audit: type=1327 audit(1546513809.401:1297): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D740066696C746572002D4100444F434B45520000002D690068617373696F002D6F0068617373696F002D7000756470002D64003137322E33302E33332E32002D2D64706F7274003130303031002D6A00414343455054
[189787.319978] audit: type=1325 audit(1546513809.421:1298): table=nat family=2 entries=22
[189789.561416] eth0: renamed from vetha09061d
[189789.614577] IPv6: ADDRCONF(NETDEV_CHANGE): veth4aacdcb: link becomes ready
[189789.618386] hassio: port 4(veth4aacdcb) entered blocking state
[189789.621965] hassio: port 4(veth4aacdcb) entered forwarding state
Then I uninstall and re-install the add-on which clears out the config. This lets it boot although just to the configuration wizard. Once I set up the config it will restart and not boot again. The output from dmesg
when it boots up the first time is:
[189955.111500] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[189955.115196] brcmfmac: power management disabled
[190271.090456] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[190271.093830] brcmfmac: power management disabled
[190365.832255] kauditd_printk_skb: 95 callbacks suppressed
[190365.832262] audit: type=1325 audit(1546514387.933:1330): table=nat family=2 entries=37
[190365.842546] audit: type=1300 audit(1546514387.933:1330): arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=0 a2=40 a3=2ef0d8 items=0 ppid=322 pid=22047 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-multi" key=(null)
[190365.854594] audit: type=1327 audit(1546514387.933:1330): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D74006E6174002D4400444F434B4552002D7000756470002D6400302F30002D2D64706F7274003130303031002D6A00444E4154002D2D746F2D64657374696E6174696F6E003137322E33302E33332E323A31303030310000002D690068617373696F
[190365.863585] audit: type=1325 audit(1546514387.963:1331): table=filter family=2 entries=41
[190365.867030] audit: type=1300 audit(1546514387.963:1331): arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=0 a2=40 a3=181dd80 items=0 ppid=322 pid=22049 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-multi" key=(null)
[190365.874228] audit: type=1327 audit(1546514387.963:1331): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D740066696C746572002D4400444F434B45520000002D690068617373696F002D6F0068617373696F002D7000756470002D64003137322E33302E33332E32002D2D64706F7274003130303031002D6A00414343455054
[190365.886273] audit: type=1325 audit(1546514387.983:1332): table=nat family=2 entries=36
[190365.889943] audit: type=1300 audit(1546514387.983:1332): arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=0 a2=40 a3=1dc3e98 items=0 ppid=322 pid=22051 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-multi" key=(null)
[190365.898331] audit: type=1327 audit(1546514387.983:1332): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D74006E6174002D4400504F5354524F5554494E47002D7000756470002D73003137322E33302E33332E32002D64003137322E33302E33332E32002D2D64706F7274003130303031002D6A004D415351554552414445
[190365.918524] audit: type=1325 audit(1546514388.013:1333): table=nat family=2 entries=35
[190366.427286] hassio: port 4(veth4aacdcb) entered disabled state
[190366.429307] vetha09061d: renamed from eth0
[190366.557294] hassio: port 4(veth4aacdcb) entered disabled state
[190366.560974] device veth4aacdcb left promiscuous mode
[190366.563435] hassio: port 4(veth4aacdcb) entered disabled state
[190398.421595] hassio: port 4(vetha4cd93a) entered blocking state
[190398.423636] hassio: port 4(vetha4cd93a) entered disabled state
[190398.426530] device vetha4cd93a entered promiscuous mode
[190398.428367] kauditd_printk_skb: 65 callbacks suppressed
[190398.428371] audit: type=1700 audit(1546514420.523:1355): dev=vetha4cd93a prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[190398.429021] IPv6: ADDRCONF(NETDEV_UP): vetha4cd93a: link is not ready
[190398.435433] audit: type=1300 audit(1546514420.523:1355): arch=40000028 syscall=290 per=800000 success=yes exit=40 a0=c a1=132c5b00 a2=28 a3=0 items=0 ppid=1 pid=322 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="dockerd" exe="/usr/bin/dockerd" key=(null)
[190398.442180] audit: type=1327 audit(1546514420.523:1355): proctitle=2F7573722F62696E2F646F636B657264002D480066643A2F2F002D2D73746F726167652D6472697665723D6F7665726C617932002D2D6C6F672D6472697665723D6A6F75726E616C64
[190398.488699] audit: type=1325 audit(1546514420.583:1356): table=nat family=2 entries=21
[190398.491988] audit: type=1300 audit(1546514420.583:1356): arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=0 a2=40 a3=d5a1f8 items=0 ppid=322 pid=22115 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-multi" key=(null)
[190398.498694] audit: type=1327 audit(1546514420.583:1356): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D74006E6174002D4100444F434B4552002D7000756470002D6400302F30002D2D64706F7274003130303031002D6A00444E4154002D2D746F2D64657374696E6174696F6E003137322E33302E33332E323A31303030310000002D690068617373696F
[190398.513339] audit: type=1325 audit(1546514420.613:1357): table=filter family=2 entries=33
[190398.516859] audit: type=1300 audit(1546514420.613:1357): arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=0 a2=40 a3=158eeb0 items=0 ppid=322 pid=22117 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-multi" key=(null)
[190398.524650] audit: type=1327 audit(1546514420.613:1357): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D740066696C746572002D4100444F434B45520000002D690068617373696F002D6F0068617373696F002D7000756470002D64003137322E33302E33332E32002D2D64706F7274003130303031002D6A00414343455054
[190398.536897] audit: type=1325 audit(1546514420.633:1358): table=nat family=2 entries=22
[190400.813584] eth0: renamed from veth5c5d1f5
[190400.852232] IPv6: ADDRCONF(NETDEV_CHANGE): vetha4cd93a: link becomes ready
[190400.856049] hassio: port 4(vetha4cd93a) entered blocking state
[190400.859727] hassio: port 4(vetha4cd93a) entered forwarding state
I hope it helps!
Edit: Oops I just saw your edit after I posted!
from addon-unifi.
In the interest of full disclosure, I'll also note that I override port 1900/udp to port 1901 because another service is apparently holding onto port 1900.
Edit: Ah it looks like it is deCONZ. When I stop it I can use port 1900 again.
Edit 2: Disabling deCONZ and using port 1900 doesn't seem to fix the issue.
from addon-unifi.
deCONZ use UPnP and maybe this add-on also? I think they need to run on the host network. Otherwise, UPnP doesn't work correctly.
The official deCONZ add-on is correctly set up as host network add-on.
from addon-unifi.
uPNP can actually be removed from the add-on, since it has no function for the supported AP's.
Nevertheless, @NoxHarmonium Already concluded that that was not the issue.
from addon-unifi.
Nice @mjrider, thank you very much.
- I'm going to test / experiment locally on how this influences currently working installations.
- See if the UniFi server log can be redirected to Hass.io add-on log output
from addon-unifi.
Good work
from addon-unifi.
Good morning, everyone,
I encountered the same problem that I was able to solve.
At first glance the MongoDB database does not start.
1°/ Check of the consistency of the DB :
mongod --dbpath /usr/lib/unifi/data/db --port 27117 --repair
2°/ Start MongoDB
systemctl start mongodb
3°/ Restart Unifi
systemctl restart unifi
For my part, that was enough.
from addon-unifi.
@jgoffaux This is the Hass.io add-on we are talking about, those commands you list won't work on this add-on. Nevertheless, thank you for your input.
from addon-unifi.
Can anyone point me in the right direction how to add
unifi.db.extraargs=--smallfiles in /data/unifi/data/system.properties
I'm running hassio and can't find the unifi folder. Probably because of the docker setup? I'm kinda stuck here :(
from addon-unifi.
@Levdbas Just wait and frenck will fix it if he has the time
from addon-unifi.
@Levdbas That needs fixing on our end and is not something you can change.
The main issue is providing a migration path for our existing users. This requires testing to guarantee it goes smooth.
Thank you for your patience.
from addon-unifi.
Same issue here, luckily before my ubiquity equipment comes in, so i'll be a patient little user @frenck
from addon-unifi.
Same issue here.
from addon-unifi.
I've fixed this in the current code base and will be part of the next release.
from addon-unifi.
This thread has been automatically locked because it has not had recent activity. Please open a new issue for related bugs and link to relevant comments in this thread.
from addon-unifi.
Related Issues (20)
- Update logo and icon of UniFi HOT 2
- ADOPTION ISSUES HOT 7
- Autobackup not working anymore since v3.0.3 HOT 3
- Update to UniFi Network Application 8.1.113 HOT 2
- Connection refused HOT 1
- Possible issue with addon and HA UniFi integration. HOT 5
- Restore from backup fails HOT 7
- web interface stuck at UniFi Network Application is starting up... HOT 1
- Feature Request - Add the ability to specify SSL Certifciates HOT 8
- Add-on seems to cause HA crash HOT 11
- cant adopt wifi access point. Server reject state HOT 2
- Unifi addon use a lot of space HOT 3
- Feature request: Add ability to restart switch devices / check uplink "Experience" connection state HOT 1
- Cannot Start UniFi Network Application HOT 1
- Unifi USG-3p cant access controller goes offline after unifi network 8.2.93 HOT 3
- Unifi add-on does not generate autobackups in /backup/unifi HOT 6
- [Feature Request] Implement Ingress feature of HA Addons HOT 3
- Unable to log in after 2FA enabled HOT 3
- Can't access addons via external URL since using UniFi Controller/APs HOT 1
- Question: does this add on-automatically update version of the Unifi controller ? HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from addon-unifi.