Nightly Build Gets black screen on RaspberryPi 1/Zero/B+ about fullpageos HOT 12 CLOSED

Hey,
There is a new nightly that might fix this issue. It waits for the an internal webserver to start before starting chromium.

from fullpageos.

In the nithtly from 31 of Jan (lite version around 600mb) take ages to load in Pi2 (around 10 minutes) and does not load in PiB

If i unplug the pi when it hangs loading (happens allways in Pi B ) next boot gets into a loop and at the end i get a kernel panic.

Tried to write 3 or 4 SD cards to check if was product of casuality and i always end in kernel panic. This does not happen on Pi2

from fullpageos.

from fullpageos.

I am also seeing the OP's issue on a Pi B with the latest nightly.

from fullpageos.

Same issue here with all nighty builds, X11 starting with black screen and mouse but no chrome comes up, but has PID. Only stable version with wheezy and chromium 22 is working for me on Pi B+ v1 2. Any ideas?

from fullpageos.

It seems like everyone experiencing this has a Pi 1/B+/zero. It might be anything slower than a Pi2 is too slow for the recent distro.

from fullpageos.

I'm using a Pi 3 and it is stuck on the colored screen when I boot. Unable to connect via SSH.

from fullpageos.

from fullpageos.

Hey, if anyone wants to try the recent RC, it seems to work far more better and has a chance on the RaspberryPi 1/Zero/B+.
This is a release candidate that I tested, if it works then great, if not, I am thinking about closing this as "wontfix"

from fullpageos.

I tried the last nightly with a Raspberry Pi B and still have the black screen problem. Looks like this can't be fixed.

from fullpageos.

So the reason FullPageOS does not work on these devices ie since they use ARMv6, please see #43

from fullpageos.

Fixed, it works now, its slow as hell and takes 5-10 minutes to boot. Might work as a digital picture frame.

from fullpageos.