gtleon Goto Github PK

arduino_core_stm32

STM32 core support for Arduino

arduino_stm32

Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards

bluescsi

A small SCSI device based on stm32

cocotb

cocotb, a coroutine based cosimulation library for writing VHDL and Verilog testbenches in Python

cocotbext-uart

UART models for cocotb

crcgen

Generator for CRC HDL code (VHDL, Verilog, MyHDL)

dlo-138

An open source firmware for DSO-138 O-Scope

ethernet-crc32

Calculate Ethernet CRC32/FCS for a captured frame

ftdi_ft2232-232_bitbang_testprogram

This programm is written to test bitband mode of FT2232 IC. It searches for FT2232 or FT232 ic and uses bitbang mode to get high or low levels on the ic's outputs.

jam-stapl

Altera Jam STAPL Player with support for 64-bit Windows versions and Raspberry Pi

jtag

simple commandline jtag stuff

jtag-1

JTAG library for Arduino

jtag-boundary-scanner

JTAG boundary scan debug & test tool.

jtag_hw_mbftdi_blaster

mbftdi-svf-player

MBFTDI is application which allows to play SVF (Serial Vector Format) files and so execute JTAG commands on FPGA/CPLD chip. Special MBFDTI programmer device based on FTDI FT2232H chip is used. SVF files are created by Altera Quartus II or Xilinx ISE development tool.

net2axis

Verilog network module. Models network traffic from pcap to AXI-Stream

psiphon-windows

Psiphon for Windows client

signalintegrity

Python tools for signal integrity applications

skillbox-async-chat

Пример клиент-серверного чата на Python для Skillbox

stm32duino-bootloader

Bootloader for STM32F103 boards, for use with the Arduino_STM32 repo and the Arduino IDE

stm32f103

STM32F103C8 Examples

svfplayer

JTAG .svf player library

udp_ip_stack

This repository contains a copy of the "1G eth UDP / IP Stack" opencores.org project(http://opencores.org/project,udp_ip_stack) and add a fully working mac layer for the Virtex 6 ML605 board. Moreover it provides a Qt benchmark software.

usb-blaster_stm32f1

The program for USB-Blaster Chinese version on STM32 works with

verilog-uart

Verilog UART

vhdl-svf

SVF (Serial Vector Format) interpreter to control a JTAG TAP

winflexbison

Main winflexbision repository

xilinx-14.7-patch-for-win10-32-64

Xilinx 14.7 patch for Win10 32/64

xvc-esp32

Xilinx Virtual Cable implementation for ESP32