No Sync at first time about ntpclient HOT 7 CLOSED

Check what version of esp8266 Arduino framework you are using. With latest commit it works. How have you installed, got or Arduino IDE?

from ntpclient.

Updated Arduino IDE from 1.6.7 to 1.6.10, flashed again to ESP8266 and still have the same problem.

from ntpclient.

Is there any other solution?

from ntpclient.

I do boot mean arduino IDE. I mean esp8266 framework on github.com/esp8266/arduino follow instructions there to use latest code directly from github. Read "Using git version" section in readme.md.

I've updated my code recently. You can test it and check if there is a different behaviour.

from ntpclient.

I've added more checkings. You will still get an error (WiFi not connected) during first moments if you do not control if WiFi is connected in your Scketch. But NTP packet is not sent if WiFi is not connected. To use latest commits you need to use my TimeLib fork. See #5.

If you do not like that behabiour, you can check WiFi is connected before throwing NTP.begin(); so NTP will not give connection errors.

from ntpclient.

I've updated ESP8266 example to trigger NTP.begin() as soon as WiFi gets a valid IP address. Please test it and close the issue it it is ok.

from ntpclient.

Tested it and now it works.
Thanks!

from ntpclient.