Comments (23)
P.S.: 3.3 isn't for the U2 yet, is it?
Officially not - but if you do not need Ethernet, unofficial 3.3 build will work great. If you need Ethernet, there are non-negligeable chances that Ethernet is not working well. But removing the Ethernet adapter from usb will put the U2 nack to working when using unofficial 3.3 builds.
from 1541ultimate.
From the FAQ
Does the U2 and U2+ support Easyflash Cartridge images?
Yes, both carts support EF. Since firmware 3.2 there is also support for saving to the EF cartridge image:Technology Preview: EAPI Support for Easyflash, incl. but not limited to writing support. Please note that the changed crt file is NOT saved automatically. You can save it by “F5”, “Save Easyflash crt” in the filebrowser (and optionally renaming the saved file).
So, while running an EF cart, in essence, enter the Ultimate menu, press F5 (contextual menu) and then choose 'Save EasyFalsh crt'. Make sure to rename it afterwards.
While this is might not the type of solution you'd expect, it is the only (feasible) solution right now and it beats having no way of saving.
from 1541ultimate.
Oh, didn't know that. Sounds good, but i completely froze the Ultimate on my C128 (using Firmware 3.2 (10F)). Not even a reset did work, I had to power off and on the computer.
Tried twice with different games.
from 1541ultimate.
This also happens on my SX64 and does not seem to be a C128 related problem.
Btw, I have the Ultimate II (without +).
from 1541ultimate.
USB Stick or Micro SD?
from 1541ultimate.
microSD
But I wasn't even asked where to save it, the cartridge is stuck directly after chosing that option.
from 1541ultimate.
Agree to the starter. Even though actual way it "beats having no way of saving", (only) saving it correct in the same file would make it 'Ultimate'.
from 1541ultimate.
But like I said: Even the workaround doesn't work for me yet.
from 1541ultimate.
Did you wait some time, as saving the EF3 image does take a minute or even longer on the U2. This was tested working on U2 with a 250407 board and 3.2 and 3.3 firmware.
from 1541ultimate.
Did you wait some time, as saving the EF3 image does take a minute or even longer on the U2. This was tested working on U2 with a 250407 board and 3.2 and 3.3 firmware.
Ah yes you are right... I did wait a while but expected some kind of dialogue.
Instead there will be a module.crt in your directory. If it is already there, nothing will be saved. So now I understand why to rename the file. Didn't notice it was there, since there were too many files in that directory. Sorry for confusion.
So great, at least there is a workaround.
P.S.: 3.3 isn't for the U2 yet, is it?
from 1541ultimate.
So this works as designed and isn't a workaround and it for sure isn't an issue at all.
-> Can be closed!
from 1541ultimate.
So this works as designed and isn't a workaround and it for sure isn't an issue at all.
-> Can be closed!
I don't think that this should be closed. It is not urgent since there is a workaround but maybe it can be marked as enhancement since it makes sense to improve Easyflash support.
from 1541ultimate.
Agree with Flexmaen - there are probably no news on this issue, but I thought I'd push it up anyway.
I remember that you, Gideon, did explain the problem in detail once in a post in the facebook group, but it is impossible to find again - maybe you can find it (you might remember a keyword from the post that allows you to find it back).
from 1541ultimate.
Using 3.7 1541Ultimate as well as my U64. Has the Save Easyflash crt option been removed? SID settings disabled as per FAQ (reu as well) any cart used hitting F5 in file browser mode displays no save easyflash crt (or any option to save crt) ?
from 1541ultimate.
The option to save easyflash will only be shown on the f5 menu if
1st) An easyflash module has been loaded.
2nd) Current path in file browser is writable, i. e. in the root where you select the device to save to the option to save is never shown.
Okay, on U64 I have tested 3.8, but it works for me.
from 1541ultimate.
Sorry, I should clarify my U64 is 1.34 (also says v3.8), and my 1541ulitimate 2+ is v3.7. I can create a d64 file, which indicates it is writable (I assume?). I have tried several different EF relase of games (Pirates, Zak Manianc Man and others). After using the save inside the game, pressing freezer button and F5 simply does not show save easyflash option. it has save EDID file, save config to flash and disk and other options. What EF cart did you specifically test it with? I can post a video later if need be? I even went back to V1.28 on U64, still nothing. Reset default settings, turned everything I could off. Still nothing.
from 1541ultimate.
Well, I have tried https://csdb.dk/release/?id=107705
Of cause, posting a video (i. e. a link to that video) might help. But we cannot promise that it will help.
from 1541ultimate.
I tried the link you listed. Interestingly, on the U64 when high score is saved at end of event the U64 crashes (locks up with cal games, pops up unreadable ML monitor with winter games). Otherwise displays no save easyflash crt. With 1541U2+ the screen flashes as if saving to easyflash. However still does not display save easyflash crt in menu. I tried the 1541U in 2 different machines. Any suggestions on getting more diagnostic info? EDIT: The U64 had swiftlink enabled which caused the problems. Disabled it is the same as 1541U, after saving high scores menu does no give option to save easyflash crt
from 1541ultimate.
acarmony1 wrote:
However still does not display save easyflash crt in menu.
Sure it shows the "Save Easyflash" item in the contextual menu (F5). However, you need to scroll down (press F7 for page down a few times) far enough to see the option.
from 1541ultimate.
... Ok .. Found it by scrolling down.. Gonna go sit way back in dark cave now.. Much thanks!
from 1541ultimate.
It looks like this ticket can be closed now?
from 1541ultimate.
Wellll... Actually it is still only a workaround (and AFAIR it is not even working in all cases). I know that there is no space left in the firmware for any additional code, but I am still hoping for a (branch) version where saving directly to the EF image (and not having to re-save the whole crt) is implemented, at the cost of some other feature which is less used/not essential.
from 1541ultimate.
from 1541ultimate.
Related Issues (20)
- Ultimate II+L issues 3.11 (11e) HOT 3
- U2+L - I was testing out Drive and Kernel ROMs but now just get blank screens and unable to access any menu HOT 12
- Ultimate64 3.11: GeoRAM disabled at Reset+Run & Reset+Load
- [UII - FW3.11 - HTTP API - LIMITATION] PUT /v1/runners:sidplay 74 char limit
- [UII - FW3.11 - HTTP API - BEHAVIOUR] Floppy Drives - GET /v1/drives response behaviour
- [UII - FW3.11 - HTTP API - BEHAVIOUR] Printer Emulation - GET /v1/drives
- [UII - FW3.11 - HTTP API - MISSINGENDPOINT] /v1/configs/C64 and Cartridge Settings/UltiDOS: Allow SetDate
- [UII - FW3.11 - HTTP API - MISSINGFUNC] Set/Load Alternate Kernal missing
- [HTTP API - FEATUREREQ] /v1/version to return more info.
- [HTTP API - FEATUREREQ] Implement Server Sent Events (SSEs)
- [HTTP API - FEATUREREQ] Allow GET /v1/files/<path>:info to return extended information regarding to file type (extension).
- [UII - FW3.11 - BASIC TOKENIZER - BUG] Basic tokenizer in fw3.11 has a bug
- [HTTP API - FEATUREREQ] API end-point to retrieve list of files on the given location
- Error compiling... HOT 6
- [HTTP API - FEATUREREQ] Retrieve a on device file by providing its full path
- [HTTP API - FEATUREREQ] API End-point to save arbitrary file to provided path
- Feature proposal: telnet support for use with Swiftlink implementation
- U64 [1.43] [3.11] When using poweroff REST method machine turns off with a very loud POP in volume
- Ultimate 64 crash using ExFAT HOT 2
- [U2+L WiFi Module - FEATUREREQ] Bluetooth Audio Output
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from 1541ultimate.