Comments (12)
Also in the last version 23 Dec 2020 of DS213 are some bugs.
Maybe you can also look over there again!?
Would be great.
Thank you for the super great tools and features that you have integrated into the two devices!
Greeting skink32
from la104.
How did you connect the temperature sensor to the LA104? What does the application show on the screen when you run it?
from la104.
@gabonator,
I wish you first of all Merry Christmas !!!
If you have time again it would be very nice if you could compile the files again. So that I could then download them again only as "system_la104.hex" and "la104apps.zip" !
Since I have no idea about programming.
Thanks for your efforts in advance.
Merry Christmas and stay healthy
skink32
from la104.
Merry Christmas to you as well!
I am currently in covid isolation and have only DS213 with me, so I cannot release new version officially since I cannot cannot check it, but here is a fresh build for you:
firmware211224.zip
la104apps211224.zip
Please check the DS1820 app and if it will work consider closing this issue
from la104.
@gabonator,
that doesn't sound good!!!
Stay healthy and get back on your feet quickly.
I have unzipped both their files and put them on the LA 104.
-
the .hex file in dial-up mode does not work after installation.
"A CRC error message comes up and no menu appears". -
the apps file works after installing to the USB drive, but also not all programs run 100% the DS 1820 app works but now.
I hope it didn't hit you too hard and you will be fine soon.
from la104.
I am fine, it was nothing serious. CRC check is new feature of OS to check its integrity. It only shows warning message when something is wrong. But again I cannot verify whether is not a bug in the code that causes false indication (on DS213 the same code works well). It is normal behaviour when the menu does not appear after clean flashing. You need to copy all files from zip archive - menu is an application on the internal disk drive. Which apps do not work?
from la104.
So I have flashed the software on the LA 104.
After I have installed the firmware .hex in dial-up mode, the CRC message appears. And I can no longer call the normal memory in the LA 104. That is, after flashing, I turn off the LA 104 and on again but it no longer appears the 8GB large memory area in which the apps are stored.
Have then again taken the .hex of the old version and then installed the new apps. Then went already times the DS 1820 software. The remaining apps I will test later again and write to you or make pictures where you see what does not work. (Of course I always installed all files from the Apps folder, of course).
P.S. Can I install this software on the DS213, but there I can not use many programs because of missing connections!
from la104.
How do you copy the firmware to the device in DFU mode? If the flashing was successful, a file with the same name but different suffix should appear on the DFU drive. I cant remember what was the suffix, but if the suffix is ".ERR", it means that flashing went wrong. Try copying the .hex file two times:
- copy the file to dfu,
- wait until the disk reconnects,
- copy the same file again,
- check the file name on the drive after it automatically reconnects
Or try flashing on another computer.
from la104.
So I copy the .hex file in DFU mode, but after copying should actually appear the same file with the extension .rdy (for Ready) that does it but neither with the old nor with the new version!
After you have restarted then you come normally in the memory mode so that you can access the 8GB internal hard drive. This works but with your .hex file that you have provided me then no longer after I have transferred you in DFU mode!
So after I have transferred the .hex no longer the normal memory 8GB displayed no matter how often I switch on or off!
It can not be the computer, because it works with all other and the files I changed (Apps file) also without problems.
from la104.
Press first button when it shows the CRC error message. It will just continue running and it should turn on the usb mass storage mode.
from la104.
Press first button when it shows the CRC error message. It will just continue running and it should turn on the usb mass storage mode.
Exactly!
How i flash LA104:
- Connect LA104 to PC
- Switch on LA104
- Clean content of 8Gb memory in mass storage mode. (After that don't try operate LA104 menu)
- Copy fresh APP content on 8Gb memory
- 5.witch off LA104.
- Boot in DFU mode (keep pressed first button and switch on LA104)
- In PC appears DFU drive, copy on it new system .hex file (Wait till drive reconnect)
- Switch off LA104
- Switch on LA104 and wait some seconds, if CRC appears simply press first button.
- You are in new system.
For me, after system .hex re flashing, DFU drive don't will reconnect. It simply disconnect. For this reason i don't now status of flashing. I think that is my PC USB host problem. After flashing i simply switch off and then on device.
P.s. - CRC appears for me too
Can somebody provide me with 1-Wire sensor connection diagram to LA104. Thanks
from la104.
I can confirm that this is resolved with the most recent build.
Thank you @gabonator !
fix: https://github.com/gabonator/LA104/releases/tag/2022.12.12
from la104.
Related Issues (20)
- FPGA configuration error
- DS213 Web Oscilloscope application gives no data (Hard Fault) HOT 6
- LA104 WebUSB connection problem 2 HOT 2
- Strange pattern shown on "desktop" when exiting Logic analyzer app HOT 1
- Logic Analyzer crashes when run HOT 1
- DSO203 HW2.60, Windows 10/11 DFU HOT 11
- RFTool capture tab shows no data.
- Diff. between Flipper Zero and LA104 HOT 15
- Major refactoring needed HOT 6
- LA104 add new protocol into filmware HOT 5
- Dockerfile broken HOT 1
- Changes HOT 2
- Fresh compile is successful, but error booting HOT 6
- Test apps.
- Display battery level on main screen
- Boot loader for LA104
- Use La104 with DT71 tweezers
- Replacing of external (usb) flash DS213 HOT 2
- Wave alchemy HOT 2
- How to exit Logic Analyzer app and go back to the app switcher GUI? HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from la104.