Default Axis Mode (relative/absolute/require explicit) about octolapse HOT 4 CLOSED

I'm now thinking that it's pretty dangerous to assume what mode the extruder will be in. For the XYZ axis, I require that an explicit command set the relative/absolute mode. If I do this for the extruder some default slicer profiles won't work. Maybe I should have a printer setting for require explicit M82/M83 or default absolute/relative mode?

from octolapse.

I think I'm going to add settings for the XYZ axes and the Extruder. I'll allow the following selections:
Extruder - Relative/Absolute mode:
Require Explicit M82/M83 - Default
Default To Absolute
Default To Relative

Extruder - G90/G91 influences extruder:
Use Octoprint Settings - Default
True
False

X/Y/Z Axes:
Require Explicit G90/G91 - Default
Default To Absolute
Default To Relative

from octolapse.

I've added the new settings and have updated the existing printer profiles. I also updated the position state to show 'Not Set' with a question mark icon if the extruder/xyz mode is not yet known.

Updated position.py to account for the new settings, including the G90/G91 influences extruder settings.

from octolapse.

This has been tested and appears to work.

from octolapse.