Any custom airport crashes whole X-Plane during start-up about atc HOT 8 OPEN

Thanks for the bug report!
Oh, you're running Linux, that explains it.
There is a bug that prevents the plugin from loading on Linux.
The bug wasn't reported in the Issues, but I've filed it now - #260.
So let's track #260, and I'm marking this one as a duplicate.

from atc.

@OakLD
Please try build 107 here: https://github.com/felix-b/atc/releases
Please let me know if it resolved your issue

from atc.

Great! I will asap and report later Today.

from atc.

Experiments on 5.9.13 4 55.45 and 11.50 no Vulkan. vsn 107
Most airports crashed on start with

AT&C [+ 61398] initUserFlight:7
AT&C [+ 61398] PLUGIN|transitioned to state[SCHEDULES-STARTED]
AT&C [+ 62018] UPILOT|User aircraft COM1 frequency change detected [-1]->[118625]
AT&C [+ 62018] AIRCRF|TUNE WARNING: aircraft[1] flight[United 737] tuned COM1 to khz[118625] - but no ATC on frequency
--=={This application has crashed because of the plugin: Air Traffic & Control}==--_

Tested were EGKK (Gatwick) EGGW (Luton) KMIA (Miami) KSEA (Seattle). Crashing took place almost immediately after the loading screen went and was replaced by the main display. (I presume AT&C+ is your debug log ?) No other obvious log issues - it looks like it's getting started up etc.

However, two worked repeatedly (i.e. would load the plugin and not crash)

EGSH (Norwich, UK) started up normally and responded to the 'set the % rate' and so on. To all intents and purposes it works except it doesn't - can't tune in to anything, no planes appearing.

EGSV (Old Buckenham UK) which is a very small airport near where I live also worked, but when I tried to start it it advised KMIA KSEA (and others) which reminded me that those had only been advised for use. However, I subsequently tested them and it still did not work.

Would imply it is connected somehow with Airport Complexity. EGSH & EGSV both have multiple runways - EGSH is a small but functional passenger airport.

The Plugin appears to be communicating ; these come from the LOG (KMIA)
AT&C [+ 0] PLUGIN|initializing PluginInstance
AT&C [+ 114] PLUGIN|host services initialized
AT&C [+ 114] PLUGIN|entering state[WORLD-ASSEMBLING]
AT&C [+ 114] PLUGIN|transitioned to state[WORLD-ASSEMBLING]
AT&C [+ 57962] PLUGIN|notifyAirportLoaded pinging state [WORLD-ASSEMBLING]
AT&C [+ 57962] PLUGIN|ping WORLD-ASSEMBLING: done
AT&C [+ 57962] PLUGIN|createWorldAssemblingState
AT&C [+ 57962] PLUGIN|exiting state[WORLD-ASSEMBLING]
AT&C [+ 57962] PLUGIN|entering state[SCHEDULES-STARTING]
AT&C [+ 58018] PLUGIN|The world now has [29433] airports, [29433] control facilities, [48] AI flights
AT&C [+ 58018] PLUGIN|User airport elevations [KMIA/12] at (25.799286,-80.302292) elevation [3.247888]
AT&C [+ 58018] PLUGIN|User airport elevations [KMIA/30] at (25.786625,-80.277539) elevation [3.268481]
AT&C [+ 58018] PLUGIN|User airport elevations [KMIA/09] at (25.786097,-80.314817) elevation [3.291789]
AT&C [+ 58018] PLUGIN|User airport elevations [KMIA/27] at (25.787731,-80.275350) elevation [3.299482]
AT&C [+ 58018] PLUGIN|User airport elevations [KMIA/08R] at (25.800701,-80.301430) elevation [3.311188]
AT&C [+ 58018] PLUGIN|User airport elevations [KMIA/26L] at (25.802018,-80.269535) elevation [3.307111]
AT&C [+ 58018] PLUGIN|User airport elevations [KMIA/08L] at (25.802897,-80.301544) elevation [3.303196]
AT&C [+ 58018] PLUGIN|User airport elevations [KMIA/26R] at (25.803981,-80.275431) elevation [3.267565]
AT&C [+ 58018] PLUGIN|transitioned to state[SCHEDULES-STARTING]
AT&C [+ 58146] PLUGIN|exiting state[SCHEDULES-STARTING]
AT&C [+ 58146] PLUGIN|entering state[SCHEDULES-STARTED]
AT&C [+ 58146] PLUGIN|transitioned to state[SCHEDULES-STARTED]

(followed by)

AT&C [+ 58146] PLUGIN|transitioned to state[SCHEDULES-STARTED]
AT&C [+ 58750] UPILOT|User aircraft COM1 frequency change detected [-1]->[118625]
AT&C [+ 58750] AIRCRF|TUNE WARNING: aircraft[1] flight[United 737] tuned COM1 to khz[118625] - but no ATC on frequency
--=={This application has crashed because of the plugin: Air Traffic & Control}==--

No obvious issues in the Log re AT&C other than the "TUNE WARNING". This also appears at EGSH and is folloed by

PARNIK simulations ARO: starting initialization...
PARNIK simulations ARO: reading ini file...
0:00:55.181 I/WIN: Opened window menu bar
AT&C [+ 55284] Heartbeat # 1
AT&C [+ 56298] Heartbeat # 2
AT&C [+ 57304] Heartbeat # 3
AT&C [+ 58315] Heartbeat # 4
AT&C [+ 59328] Heartbeat # 5

Could the complexity of the airport cause the Window Menu to be modified before it is created (as it's waiting for the airport ?)

from atc.

I've tested the new release and it loads with no issues, the log seems all right too. When loaded, AT&C showed in the plugins list with first level options, but I couldn't do anything. It wouldn't change frequencies to CLRDEL/GND/TWR. The AirControl menu shown arrow like it should contain further sub menu, but contains no items.
I couldn't hear anything either, but that might be because I don't know yet how to configure AT&T on linux with TTS.

I assume that properly loaded AT&C should have it's log section finished with:

AT&C [+      9421] World initialized
AT&C [+      9421] LWORLD|Assembled world with [29434] airports, [0] airspaces, [29434] control facilities

The only part which brings some questions is:

0:00:30.095 I/NAVT: Airspaces are done loading async...
Fetching plugins for Custom Scenery/KASE - Aspen/plugins

CustomSBDatarefs004 - parsing setup file
CustomSBDatarefs004 - No CustomSBDatarefs004.ini file found, will use defaults
Loaded: Custom Scenery/KASE - Aspen/plugins/CustomSBDatarefs004/64/lin.xpl (sandybarbour.projects.customsbdatarefs004).

Loaded: Custom Scenery/KASE - Aspen/plugins/GroundTraffic/64/lin.xpl (Marginal.GroundTraffic.KASE - Aspen).

Could not find tile 49 name is open-frame
Could not find tile 50 name is close-frame
 (in sign '{@L}_A_' from airport KTEX:Custom Scenery/KTEX - Telluride Regional Airport/Earth nav data/apt.dat)
Could not find tile 49 name is open-frame
Could not find tile 50 name is close-frame

from atc.

you say 'No Vulcan'?

Can you try on xplane 11.50 with Vulcan? Just curious.

from atc.

Yes, probably :) Never actually tried it as don't need it. Also to add, I do have Swift (VATSIM connector) installed normally, removed that plugin completely in case there was a fight over who was displaying aircraft but no difference.

from atc.

Vulkan makes no difference ; gets to displaying the airport you have selected, crashes, about a second later program stops.

I presume there is some kind of plugin initialise at this point (Swift announces this ; removing swift does not change the behaviour of the plugin)

from atc.