Unexplained error message about linux-dexdrive HOT 3 OPEN

After rechecking, i noticed the DC outlet was a bad one. The external diameter (negative current) of the plug was OK, but the internal diameter (positive current) was too large and didn't made any contact with the central pin of the DC inlet of my device.

It's as dumb as this. Sorry for the inconvenience. Now i have this message:

xxx@xxx-Asus-P8Z77-V-Pro:~$ sudo dexattach --check --verbose /dev/ttyUSB0
[sudo] Mot de passe de marc-mongy :
Opening /dev/ttyUSB0 and setting line discipline
Cannot set line discipline: Invalid argument

Some tunings are still needed, but my device is properly power supplied now.

Thanks anyway, Marc.

from linux-dexdrive.

Est-ce que le module est bel et bien chargé? Dixit le README :

(If you get a Cannot set line discipline: Invalid argument error, it is most
likely that the dexdrive module isn't loaded.)

(Pour vérifier, juste à rouler lsmod | grep dexdrive. Si rien n'est affiché, le module doit être chargé avec modprobe.)

from linux-dexdrive.

Bonjour @fbriere ,

Oui, j'ai bien le message suivant:

"""
Opening /dev/ttyUSB0 and setting line discipline
Device number is 252:0
"""
Donc techniquement, le logiciel fonctionne. Mais je ne suis pas plus avancé pour après. Est-ce qu'il existe des logiciels sous Linux (similaires à DexPlorer) qui font appel à votre pilote?

Bien cordialement, Marc.

from linux-dexdrive.