Pi Zero version 1.3 about pigfx HOT 11 CLOSED

I've tested it successfully on a plain old Pi first model and Pi Zero. I thought that the 1.3 version is no different from those except for the camera connector.

It may be due to different addresses of some hardware peripherals. Can you do some tests?

from pigfx.

I have 4 RPi boards (1, 2, 3, Zero) and I will try all of them (but I don't promise).

from pigfx.

I can already tell you that it won't work on raspi 2 and 3 due to different peripheral addresses.
This can be fixed but I don't have time right now :(

from pigfx.

So, I have Pi Zero v1.3 and SD-card with PiGFX from Spencer. This kit has been started properly at once and not modified firmware or changed Pi board.

from pigfx.

So, you confirm that it works on the Pi 1.3 with the unmodified firmware you received by spencer. Right?

Can you please test the following:

• update your repo to the latest commit of pigfx/master
• copy bin/kernel.img to your raspi sd card. Leave all the other files untouched
• turn on the whole system and check if everything works

Thank you for your effort :)

from pigfx.

So, you confirm that it works on the Pi 1.3 with the unmodified firmware you received by spencer. Right?

Yep!

Please wait a few hours.

from pigfx.

Ok so it's definitely not an hardware problem. If my kernel.img works it must be related to TheCodeman toolchain/system

from pigfx.

Just reinstalled and rebuilt it all and seems ok now ?
Not sure what it was .
ken

from pigfx.

Good news!
So.. I'll close the issue.

@foxweb: the test is not needed anymore, but thank you very much for your effort 👍

from pigfx.

@fbergama @TheCodeman I have built the latest kernel.img and it works so good as unmodified firmware from Spencer.

from pigfx.

Great! Thank you

from pigfx.