ah yeah sorry. those things showing up should never happen on a real Raspberry pi. Im going to push a new release you can try fairly shortly.

from farmbot_os.

any ETA when can we expect the new release?

from farmbot_os.

Your on a pi3 correct?
this release should work: here

from farmbot_os.

Sorry, It dosent work, it does not scan and show the home wifi SSID

from farmbot_os.

@mrmadhu Can you try opening the JavaScript console and tell me if you see any errors? That might have additional information about what the issue is.

from farmbot_os.

Javascript console is ctrl + shift + J on Linux and Windows. I forget what the hotkey is on Mac.

from farmbot_os.

Please find the attached screen shot

from farmbot_os.

@jokosup @mrmadhu

Ok- we're looking into the issue right now. The weird thing is that if your WiFi configurator is running, the server on port 4000 should, in theory be running also.

A few other questions:

• What OS are you both on?
• What kind of router do you have? (I'd like to google and see if your router does any sort of port blocking)
• Is there any firewall software installed locally or on your router?

One theory I have (but can't confirm really) would be that your wifi router is blocking port 4000? This would be strange, since your router obviously allows port 80, though. Do you think that is possible? Have you been able to run other services over your LAN?

from farmbot_os.

Thanks Rick,

1. I am using ubuntu and windows 7.
2. Ubee cable modem with router
3. no firewall software.

i did try with setting up my firewall protection to low in my router as well.

from farmbot_os.

The wifi sometime work, sometime doesn't.

from farmbot_os.

Ah i see. That is actually a common problem so far. It is a power issue. The PI3 requires more power than previous pis. Something to the tune of 2.5 amps

from farmbot_os.

hello 
i'm still stuck, with the same problem even after disabling firewall and higher amps power supply 
i'm using a raspberry pi 3 
is there any way to ssh to the farmbot os, if yes which ip address ?
Madhu

  From: Connor Rigby <[email protected]>

To: FarmBot/farmbot_os [email protected]
Cc: mrmadhu [email protected]; Mention [email protected]
Sent: Thursday, 20 October 2016, 8:38
Subject: Re: [FarmBot/farmbot_os] Unable to save Wifi configuration (#186)

Closed #186.—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or mute the thread.

from farmbot_os.

There is no ssh into it yet.
(tho it is a feature we are working on)

But i made it on the latest release be able to plug a mouse and keyboard and use the shell over hdmi.

What is the amperage of you power supply?

from farmbot_os.

i am using 2.1A usb from the power plug.

it works fine when i run Raspbian Jessie, but not the farmbot_os.
what makes farmbot_os needs more power?

from farmbot_os.

Im beginning to think it is not a power issue. 2.1 amps should be enough. I can't reproduce locally so i am going to be testing some things on other peoples environments.

from farmbot_os.

relevant kernel logs:

brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
brcmfmac_sdio mmc0:0001:1: Direct firmware load for brcm/brcmfmac4330-sdio.txt failed with error -2
brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50

from farmbot_os.

@jokosup @mrmadhu We're still investigating, but thanks for all the great information so far. It appears to be a driver issue.

from farmbot_os.

@jokosup can you try to boot your pi without a hdmi cable plugged in?

from farmbot_os.

yes, i have tried that. same results.

from farmbot_os.

Same result for me as well

from farmbot_os.

@jokosup and @mrmadhu

can you guys please try flashing the pre-release for me?
get it here
Try it with and without HDMI plugged in.

from farmbot_os.

Hi
just tried, its able to connect to home wifi and gets an IP

but no luck with my.farmbot.io connectivity or no way to login to the OS, via SSH

Madhu

from farmbot_os.

@mrmadhu have you created an account on my.farmbot.io first?

from farmbot_os.

yes and the id was configured on the wificonfigurator page

from farmbot_os.

can you try creating an account on http://staging.farmbot.io and using those same credentials on configurator?

from farmbot_os.

do i need to re-image the sd card again ?

from farmbot_os.

If wifi configurator comes up you dont, but if its 'bricked' then you will

from farmbot_os.

@ConnorRigby it connects to staging and gets a message that "BOT status OK , but no control of stepper

from farmbot_os.

I am able to connect to the FarmbotConfigurator, but when i click Save Configuration, it got the "TRYING TO LOGIN" response. then lost the WiFi.
i deleted the files from AppData and restart it again, WiFi came back.

from farmbot_os.

Finally, i see the BOT status OK too.. and able to shutdown my device from the web. I haven't install my motors yet.. will test again later...

from farmbot_os.

@ConnorRigby , still stuck, i'm able to shutdown pi from the web, and there is a success message for every command send from the web like absolute x move, but no movement at the stepper, any way to find out what exactly is happening with arduino communication ?

from farmbot_os.

i am having the same issue as @mrmadhu. no movement at the stepper.

from farmbot_os.

sorry guys my last comment got lost in transit I guess.

Two things.

1. Your Arduins need an update. The hardware is all working fine, the Arduino just doesn't have matching firmware. If you guys run Linux I can walk you thru updating them being that In the alpha release I gave you, the OTA updates are broken.
2. The wifi issue is in fact power related. If it happens again you will need to source a good 5v 2.5 amp power supply.

from farmbot_os.

@ConnorRigby will get a linux Vbox, request you to please share the steps

from farmbot_os.

ok.

• install a ubuntu 16.04 image in vbox
• Make sure you can access your arduino from inside the vbox.
• find the location of your arduino. (from a terminal you can run ls /dev/ttyACM0 or ls /dev/ttyUSB0)
  • it will probably be one of:
    • /dev/ttyACM0
    • /dev/ttyUSB0
• run this inside a terminal: wget https://gist.githubusercontent.com/ConnorRigby/b8acfeb91d1c087680efeb489d9c926c/raw/c89db6f40e44fca484635007bf7b1733ecf7fd64/update.sh -qO- | bash -s

from farmbot_os.

@mrmadhu @jokosup
I made a beta release you can try instetad of the above steps.
When your bot boots you should be able to hit the Firmware Updates Available button and it will update your arduino.

NOTE

Do NOT hit the Controller Updates Available button. It will actually make your bot go back to an older release. (because the image your using is beta)

from farmbot_os.

unable to update the Firmware, it seems stuck in updating FW

from farmbot_os.

by the way, the stepper motor is now working. toggle switch tools (vacuum, water valve and led) are working as well. I only tested one motor as i only have 1 stepper motor driver right now (will have more tomorrow). Camera does not work, what should i put the value for camera's url?

from farmbot_os.

@jokosup, the camera widget on the web app works with any webcam stream URL, but you have to setup a stream yourself. Right now the OS does not automatically stream the pi camera or a USB camera video, though that would be a nice feature! In the meantime if you set up something external, you can use that.

By the way, do you know the reason why the motors were not working for you before?

from farmbot_os.

still stuck with stepper motor issue, even after updating with new firmware. @ConnorRigby - the new image that you have uploaded with arduino fix has wifi configuration issue again

from farmbot_os.

@roryaronson ok. the new firmware fixed it.

@mrmadhu
try update the Arduino firmware with this command:
wget https://gist.githubusercontent.com/ConnorRigby/b8acfeb91d1c087680efeb489d9c926c/raw/c89db6f40e44fca484635007bf7b1733ecf7fd64/update.sh -qO- | bash -s
and also deploy the beta version of farmbot_os.
Can you also make sure that the stepper drivers and motors are installed and connected properly.

from farmbot_os.

So the WiFi issue is power related actually. My latest beta image just shaves some power requirements off. You need at MINIMUM 2.5 amps from a 5 volt power supply. We will be shipping with a 3 amp psu.

from farmbot_os.

Perfect @ConnorRigby all well with the new image 2.1.0, all works well with 2.1 amps, great job ....

from farmbot_os.

there are issues with web app, not sure if we need to put this into a new issue

from farmbot_os.

@mrmadhu Yes, please do. Preferably at the Repository for the frontend: https://github.com/FarmBot/farmbot-web-frontend

Thanks for all your help so far.

from farmbot_os.

Thanks for your patience guys!

from farmbot_os.

@mrmadhu Ah this is good news. Your arduino needs an update though and
github is down due to DNS errors i believe. (Github hosts our arduino
firmware releases)

@Joko when you connect, you will loose wifi. (The raspberry pi can not
operate in wifi hotspot mode, and client mode at the same time) Does it
scan for networks? if you provided good credentials you will no longer see
FarmbotConfigurator.

On Fri, Oct 21, 2016 at 9:23 AM, Joko [email protected] wrote:

I am able to connect to the FarmbotConfigurator, but when i click Save
Configuration, it got the "TRYING TO LOGIN" response. then lost the WiFi.
i deleted the files from AppData and restart it again, WiFi came back.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
#186 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AUK8bqV_WIv4oKI8thNxCaeDQVwWi3Oaks5q2OcUgaJpZM4KXpzj
.

from farmbot_os.

Yes unfortunately your arduinos will need an update but if i remember
correctly the button to make them update is broken. If you guys run linux i
can walk you thru updating them from your normal pc

On Sat, Oct 22, 2016 at 9:54 AM, Joko [email protected] wrote:

i am having the same issue as @mrmadhu https://github.com/mrmadhu. no
movement at the stepper.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
#186 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AUK8bhq08GTKWcL6IWY60gR9D9VcmRyZks5q2j_OgaJpZM4KXpzj
.

from farmbot_os.

@ConnorRigby i found that my router setting needs to be adjusted. the PSK is not enabled in my guest network.

Do you make any updates on the staging site this morning, none of the features are working. BOT is connected, but when clicking any buttons or setting, it throwing an errors.

from farmbot_os.

@jokosup you probably need to reboot your bot.

from farmbot_os.

i have tried to reboot several times and still not working.

from farmbot_os.