Define GPIO pins for VS1053 about esp32-radio HOT 2 OPEN

Some of the pins have a default assignment, see table progpin[] in main.cpp.
For example pins 18,19,21,22,23:
{ 18, false, false, "", false }, // Default for SPI CLK
{ 19, false, false, "", false }, // Default for SPI MISO
{ 21, false, false, "", false }, // Also Wire SDA
{ 22, false, false, "", false }, // Also Wire SCL
{ 23, false, false, "", false }, // Default for SPI MOSI

In the config page, you only have to specify pins that differ from the default.

from esp32-radio.

Really thank you for your reply. As my upper table shows I have used the same pins (even if I have defined them again) but I'm not able to figure out what is the issue. I have the webpage showing the radio playing but I have no sound and I have no image on the oled. I have checked wiring and continuity at least 10 times now, everything is by the book.
If you have a few tips what to check it would be awsome

from esp32-radio.