ESP32 Radio + Oled 0.98" scrolling + U8g2lib about esp32-radio HOT 6 OPEN

OLED is now supported.

from esp32-radio.

Ich habe das 0,98 OLED Display ("1306")

SCL an GPIO 15 und SDA an GPIO 4

DREQ habe ich ähnlich wie bei dem HetTec Beispiel von GPIO 4 auf 2 verlegt.

Radio läuft nur Display bleibt dunkel.

Wer erkennt meinen Fehler. Danke für Unterstützung.

Viele Grüße und danke für die tolle Arbeit.

from esp32-radio.

try my post of 11/08/2017
it works

from esp32-radio.

You have to be sure that the pins for SDA and SCL are in the preferences. You may do so in the config page of the webinterface. Restart the radio and look at the debug output with the serial monitor. Check if the pins match the ones you used for the connection with the display.
See also here.

from esp32-radio.

@blotfi is there any chance to update SSD1306.h ?

from esp32-radio.

I only use U8g2lib ( I didn't develop the lib) so you can update it via Arduino lib manager
I didn't worked on this project since my last post
Best regards

from esp32-radio.