Git Product home page Git Product logo

Comments (9)

edward-shen avatar edward-shen commented on August 13, 2024

Please post your full config, removing any personally identifiable information (including API keys).

Are you sure you have all those modules present in your config.js? This looks like an error from MagicMirror itself, rather than MMM-pages.

from mmm-pages.

majdzik84 avatar majdzik84 commented on August 13, 2024
/* Magic Mirror Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */


var config = {
	//address: "localhost", 	// Address to listen on, can be:
	address: "0.0.0.0",
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: [],
	//ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.2.98", "::ffff:192.168.2.199"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "pl",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"],
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
			config: {
				effect: "genie",}
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "KALENDARZ",
			position: "top_left",
			config: {
                maximumEntries: 8,
                maximumNumberOfDays: 365,
                showLocation: false,
                maxTitleLength: 25,
                maxLocationTitleLength: 25,
                wrapEvents: true,
                wrapLocationEvents: false,
                maxTitleLines: 3,
                maxEventTitleLines: 3,
                animationSpeed: 2000,
                fade: false,
                fadePoint: 0.25,
                displayRepeatingCountTitle: true,
                dateFormat: "MMM Do HH:mm",
                dateEndFormat: "MMM Do HH:mm",
                //showEnd: true,
                fullyDayEventDateFormat: "MMM D",
                timeFormat: "absolute",
                getRelative: 6,
                urgency: 1,
                broadcastEvents: true,
                hidePrivate: false,
                sliceMultiDayEvents: false,
                nextDaysRelative: true,
				colored: true,
				calendars: [{
						symbol: "calendar-check-o",
						url: "xxxxics"
					},
{
						symbol: "birthday-cake",
						color: '#ebd234',
						url: "xxxcs"
					},
					
{						
						symbol: "calendar-times",
						color: "#d60000",
						url: "https://www.thunderbird.net/media/caldata/PolishHolidays.ics"
					}]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			disabled: true,
			position: "top_right",
			config: {
				location: "Potępa",
				locationID: "xx", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "xxx"
			}
		},
{
	module: "MMM-Currentweather-MQTT",
	disabled: false,
	position: "top_right",
	config: {
				location: "xxx",
				locationID: "xxx", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "xxx",
		roundTemp: false,
		degreeLabel: true,
		showWindDirection: true,
		showWindDirectionAsArrow: true,
		showHumidity: true,
		showFeelsLike: true,
		useBeaufort: false,
		useKMPHwind: true,
		logging: true,
		useWildcards: false,
		showIndoorTemperature: true,
		mqttServers: [
			{
				address: '192.168.2.98',  // Server address or IP address
				port: '1883',                // Port number if other than default
				user: 'xxx',
				password: 'xxx!',
				subscriptions: [             // for now, all seven values must be 
				                             // specified in the config, 
							     // even if they are not delivered and not displayed.
					{
						topic: 'mirror/pogoda/temperatura', // Topic to look for
						suffix: '°C',             // Displayed after the value
						decimals: 1,              // Round numbers to this number of decimals
						sortOrder: 10,            // sortOrder 10 has to contain the temperature 
						maxAgeSeconds: 18000,     // take Openweather value if older than 5 hours
					},
					{
						topic: 'mirror/pogoda/wilgotnosc',
						suffix: '%',
						decimals: 0,
						sortOrder: 20,            // sortOrder 210 has to contain the humidity
						maxAgeSeconds: 18000,
					},
					{
						topic: 'mirror/pogoda/temp_piec',
						suffix: '°C',
						decimals: 1,
						sortOrder: 30,            // sortOrder 30 has to contain the illumination
						maxAgeSeconds: 18000,
					},
					{
						topic: 'mirror/pogoda/wiatr',
						suffix: '°C',
						decimals: 1,
						sortOrder: 40,            // sortOrder 40 has to contain the wind speed
						maxAgeSeconds: 18000,
					},
					{
						topic: 'wetter/act-wind-dir',
						suffix: '°',
						decimals: 0,
						sortOrder: 50,            // sortOrder 50 has to contain the wind direction
						maxAgeSeconds: 18000,
					},
					{
						topic: 'wetter/raining',
						suffix: '',
						decimals: 0,
						sortOrder: 60,            // sortOrder 60 has to contain the boolean if its just raining
						maxAgeSeconds: 18000,
						conversions: [
							{ from: "true", to: "tak" },
							{ from: "false", to: "nie" }
						]
					},
					{
						topic: 'wetter/rain-today',
						suffix: '',
						decimals: 1,
						sortOrder: 70,            // sortOrder 70 has to contain the amount of rain today
						maxAgeSeconds: 18000,
					},

				]
			}
        ],
	}
},
		{
			module: "weatherforecast",
			disabled: false,
			position: "top_right",
			header: "Prognoza pogody",
			config: {
				lang: "pl",
				locationID: "xx", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "xxx",
				maxNumberOfDays: 5,
                                //colored: "false",
                                fade: false,
                                //fadePoint: 1,
                                showRainAmount: true,
                                scale: false,
								
			}
		},
{
    module: 'MMM-MQTT',
    position: 'top_right',
    header: '',
    config: {
        logging: false,
        useWildcards: false,
        mqttServers: [
            {
                address: '192.168.2.98',  // Server address or IP address
                port: '1883',          // Port number if other than default
                user: 'xxxx',          // Leave out for no user
                password: 'xxxx!',  // Leave out for no password
                subscriptions: [
                    {
                        topic: 'mirror/pogoda/powietrze', // Topic to look for
                        label: 'Powietrze jest', // Displayed in front of value
                        suffix: '',         // Displayed after the value
                        maxAgeSeconds: 350,    // Reduce intensity if value is older
                    },
                ]
            }
        ],
    }
},

	{
		module: 'MMM-iFrame-Ping',
		disabled: true,
		config: {
			// See 'Configuration options' for more information.
		url: "http://192.168.2.98:8123/magic-mirror/kamera", //url to display

			height:"100%", 
			width:"100%",
			autoRefresh: true, //set to false for video
			updateInterval: 1, //in min. Only if autoRefresh: true
			displayLastUpdate: false,
			width: "100%", // Optional. Default: 100%
			height: "100%", //Optional. Default: 100px
			scrolling: "no" 
			}
	},

{
        module: 'MMM-pages',
		disabled: true,
        config: {
                modules:
                    [[ "weatherforecast", "newsfeed"],
                     [ "calendar", "compliments" ]],
                fixed: [],
				homePage: 0,
        }
    },


{
  module: "MMM-NowPlayingOnSpotify",
  position: "center",
  disabled: false,
  config: {
	showCoverArt: true,
    clientID: "xxx",
    clientSecret: "xxx",
    accessToken: "xxx",
    refreshToken: "xxxxx"

  }
},
        {
		module: 'MMM-Screencast',
		position: 'bottom_center', // This position is for a hidden <div /> and not the screencast window
		config: {
			position: 'middle_center',
			x: 420,
			y: 420,
			height: 400,
			width: 600,
		}
        },
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "Wiadomości TVN24",
						url: "https://www.tvn24.pl/najnowsze.xml"
					},
					{
						title: "Wiadomości TVN24",
						url: "https://www.tvn24.pl/najwazniejsze.xml"
					}
				],
				showSourceTitle: false,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},

{
      module: 'MMM-Remote-Control',
      config: {
      }
    },


{
    module: 'MMM-MQTT',
    position: 'bottom_right',
    header: '',
    config: {
        logging: false,
        useWildcards: false,
        mqttServers: [
            {
                address: '192.168.2.98',  // Server address or IP address
                port: '1883',          // Port number if other than default
                user: 'xxx',          // Leave out for no user
                password: 'xxx!',  // Leave out for no password
                subscriptions: [
                    {
                        topic: 'mirror/pogoda/temp_piec', // Topic to look for
                        label: 'Temp.ogród: ', // Displayed in front of value
                        suffix: '°C',         // Displayed after the value
                        maxAgeSeconds: 350,    // Reduce intensity if value is older

                    },

                    {
                        topic: 'mirror/pogoda/co2', // Topic to look for
                        label: 'CO2 w salonie: ', // Displayed in front of value
                        suffix: 'ppm',         // Displayed after the value
                        maxAgeSeconds: 350,    // Reduce intensity if value is older
                         colors: [             // Value dependent colors
                            { upTo: 500, value: "green", label: "green", suffix: "green" },
                            { upTo: 600, label: "yellow", value: "yellow", suffix: "yellow" },
                            { upTo: 900, label: "#ff4d00", value: "#ff4d00", suffix: "#ff4d00" },
                            { upTo: 2000, label: "red", value: "red", suffix: "red"  }, // The last one is used for higher values too
                        ],
                    },

                ]
            }
        ],
    }
},
{
    module: 'MMM-WiFiPassword',
    position: "bottom_right",
      config: {
        //See 'Configuration options' for more information.
        network: "xxx",
        password: "xx",
		header: "WiFi - Internet",
		qrSize: 80,
		showNetwork: false,
		showPassword: false,
		showAuthType: false,
      }
  },
{
		module: 'MMM-homeassistant-sensors',
		disabled: false,
		position: 'bottom_left',
		config: {
			host: "xxx",
			port: "xx",
			https: false,
			token: "xxxx",
			prettyName: false,
			stripName: false,
			debuglogging: false,
			updateInterval: 120000,
			values: [{
					sensor: "sensor.natalka_temperature",
					alertThreshold: 26,
					icons: [{
							"default": "thermometer"
						}
					]
				},{
					sensor: "sensor.alicja_temperature",
					alertThreshold: 26,
					icons: [{
							"default": "thermometer"
						}
					]
				},{
					sensor: "sensor.sypialnia_temperature",
					alertThreshold: 26,
					icons: [{
							"default": "thermometer"
						}
					]
				},
{
					sensor: "sensor.salon_temperatura",
					alertThreshold: 26,
					icons: [{
							"default": "thermometer"
						}
					]
				},
				{
					sensor: "binary_sensor.zamek_front",
					icons: [{
							"state_off": "lock",
							"state_on": "lock-open-variant"
						}
					]
				},
				{
					sensor: "binary_sensor.zamek_tyl",
					icons: [{
							"state_off": "lock",
							"state_on": "lock-open-variant"
						}
						
					]
				},
				{
					sensor: "binary_sensor.brama_wjazdowa",
					icons: [{
							"state_off": "gate",
							"state_on": "gate-open"
						}
					]
				}, 
				{
					sensor: "binary_sensor.brama_lewa",
					icons: [{
							"state_off": "garage",
							"state_on": "garage-open"
						}
					]
				},
				{
					sensor: "binary_sensor.brama_prawa",
					icons: [{
							"state_off": "garage",
							"state_on": "garage-open"
						}
					]
				},

			]

		}
	}, /*Tu*/
	


	]
};


/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

from mmm-pages.

edward-shen avatar edward-shen commented on August 13, 2024

By chance, do you have errors about your config file? On line 224-225 (right after the weatherforcast config), you have an extra }, -- can you try removing one of them?

from mmm-pages.

majdzik84 avatar majdzik84 commented on August 13, 2024

Sorry, I got things mixed up recently. I updated the code. You can check now ?

from mmm-pages.

edward-shen avatar edward-shen commented on August 13, 2024

This looks like a problem with MMM-Remote-Control: Jopyth/MMM-Remote-Control#155. I would suggest asking there for a possible workaround instead. MMM-pages does strict type checking, so it won't accept string payloads.

To verify this, you should've gotten a log message as well in the console: [Pages]: received a notification to change to page ... where it mentions type string instead of type number.

I unfortunately don't know how others interface MMM-pages with MMM-Remote-Control, so I can't provide any help beyond this.

from mmm-pages.

majdzik84 avatar majdzik84 commented on August 13, 2024

Thank you for your help. I will then have to think about it and look for a solution.
image

from mmm-pages.

edward-shen avatar edward-shen commented on August 13, 2024

Yeah, there you go. Since it's not related to MMM-pages now, I'm going to close this issue, but feel free to continue discussion if you find a workaround.

from mmm-pages.

majdzik84 avatar majdzik84 commented on August 13, 2024

"Actually, it's working as expected. You guys have to use /api/notification/PAGE_CHANGED/2 instead of sending a payload.
That actually parse the number into an integer, and send it as a payload. ;D" - Yeah !

from mmm-pages.

edward-shen avatar edward-shen commented on August 13, 2024

Ah, glad to see it working!

from mmm-pages.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.