Comments (16)
I will write a calibration tool for BetterJoyForCemu - perhaps over this weekend.
Until then - you can also check your controller calibration by connecting it to a Switch and calibrating the defaults from there. They would then save on the controller itself. I did that when I first got my controller. BetterJoy reads those values and uses them for the default calibration, so maybe those are off for you.
from betterjoy.
Have you tried using it wired? If it works fine wired, then you need a new bluetooth dongle. I had similar issues with my old bluetooth dongle. I found that un-pairing everything that was paired to it and re-pairing the pro controller helped a little bit and also always removing the controller from the bluetooth list when I'm done and reconnecting it next time I need it.
from betterjoy.
I haven't tried it wired, and I always remove it from the device list, also, is the only thing I use the Bluetooth for. what bugs me, is that I've been able to calibrate it for other games, but cemu stays the same.
from betterjoy.
You should plug the controller with the charging wire to your pc and launch the app it should detect it. If it works then, you know it's the dongle. I had the same experience with my old bluetooth dongle. I could use my controller fine with wiinupro or just as directinput in cemu or other games that works with directinput. But I had issues with this app. I bought a new dongle on amazon and it fixed my issues.
from betterjoy.
I've just tried that, and it worked just fine, it's a bummer becouse it's the second dongle I've tried. however, better this than a bad controller. thanks for the quick response.
from betterjoy.
Kinda late replying to this but I also have this problem. I hope this will be fixed with later versions since I like playing wireless.
from betterjoy.
I am having this issue as well. The joystick doesn't seem to put in max forward when i push the stick.
@MathBurns what dongle did you get to fix this issue?
from betterjoy.
Asus one on Amazon(USB-BT400)
I have a slight issue with it: the motion controls dont always work, but I can use padtest when I connect to see if it works. If it doesn't just close the app and relaunch. It'll work eventually.
from betterjoy.
Thanks, I will give that a shot.
from betterjoy.
I purchased the Asus USB-BT400 as well as another brand and tested it. I am still experiencing left joystick deadzone/calibration issues. I used Hitman and Dark Souls 3 as my test and in those games, when I push forward, they only go up to walking and not in running speed. Any idea/alternative solutions?
from betterjoy.
idk if it would help but when you first connect your switch controller you can calibrate it with windows. If you did maybe get the bluetooth dongle closer to you? If not then Im stumped.
from betterjoy.
I didn't read your last comment until now, but that was exactly it! It took me half a day today trying to figure out what's wrong. And it was just simply connecting to switch and calibrate there! Problem solved! Thank you and awesome tool!
from betterjoy.
Added advice to README e8ba346
from betterjoy.
Hey David, I have the issue of my pro controller up/down axis not giving full range. I calibrated it in my switch but it didn't help. I didn't understand your advice from the readme 'Switch off "also use for axes/buttons" under motion settings and set the input deadzones to 0' - is this a Cemu option? I'm having the issue in a regular PC game so would appreciate a way to configure deadzones through the app.
Thanks so much for all your hard work on this!
from betterjoy.
Hi, Mr. Davidobot, I have an issue about the motion drifting / dragging, I already try many way even add cemu to steam, not even a chance to solve it, after I saw some people comment that the better joy have calibrate button, but I have already download all kind version of betterjoy, but I still don't see any calibration button, please help, calibration in steam, nintendo switch still not solving it, will be appreciated if you can help, thank you 😊😊
from betterjoy.
@limeugene1997 you can get the calibration button if you turn on "nonOriginalController" (or something named similar depending on your version of BetterJoy) in settings.
from betterjoy.
Related Issues (20)
- [BUG] Gyro Controls Wrong (Dolpg
- Controller for switch is located but no function can be done.
- Add option to not map Special button
- Microsoft .NET Framework error at startup #360 HOT 1
- [BUG] Gyro is skewed to the left? If not that, it's seemingly just bugged. HOT 1
- Massive input lag on both joy cons HOT 1
- Hi I DESPRETLY need hepl HOT 1
- [ENHANCEMENT] Add a feature that allows you to pair controllers through betterjoy and it bypasses pins HOT 3
- crash
- i have the duplicate timestamp enqueued [BUG]
- [ENHANCEMENT] allow split joycon gyros to be mapped as two separated mouse devices
- [BUG] Picking up three controllers and the disconnecting them, when there is one or none controllers.
- Why does the app keeps pressing "home" and "capture" buttons randomly
- Controller input locks up after intense RUMBLE.
- Controller connected with USB but doesn't work
- [BUG] "Instance Already Running"
- [ENHANCEMENT] Allow controllers to be reconnected
- Better Joy by default is making my joycons act like a mouse and i can't disable it from doing that[BUG] HOT 2
- [BUG] R1 not working with switch joycons?
- Problem with locating joycons
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from betterjoy.