StartDay/EndDay not working properly about quickfixn HOT 4 CLOSED

I think you're saying that, when the app first starts up, it does not correctly figure out whether the current time is between the StartDay and EndDay, correct?

from quickfixn.

correct, the issue is in CheckTime not accounting for the usage of StartDay & EndDay

from quickfixn.

Confirmed.

This is pretty easy to reproduce.

For example, given these settings:
StartTime=00:30:00
EndTime=01:00:00
StartDay=Monday
EndDay=Saturday

The above settings define a session as starting Monday 00:30:00 and ending Saturday at 01:00:00.

So, if it's Tuesday at 10:00:00, that is within the session, and an initiator should try to connect.

BUT -- it appears that QF/J is judging this wrong. It is ignoring the day. It is checking whether 10:00:00 is within 00:30:00-01:00:00 (e.g. a half-hour session).

TO REPRODUCE:
Configure TradeClient config file with a weeklong session similar to the above, where the EndTime is just a little after the StartTime, but the days are far apart. Then run TradeClient.exe. You'll see that TradeClient does not try to connect.

from quickfixn.

Looks like your fix broke test SessionScheduleTests.testWeeklySessionMultiDayHours(). Can you investigate and resubmit?

from quickfixn.