Use what software on Windows to compile for ESP8266 about colorchord HOT 17 CLOSED

Hmm, I was trying to get it to work with TCC in windows. I'll try it again and report back.

from colorchord.

from colorchord.

from colorchord.

TCC is funny. It's in VERY active development. Literally daily commits. Just no one's made a release.

I think I have it almost 100% windows compatible. Please check it out again, then look in colorchord2/windows/compile.bat

You will need to install TCC 0.9.26 to C:\tcc to use it.

On my Windows system it seems not to get any sound data from the sound callback. Could you check?

Re: ESP8266. I will consider that. I have a few tweaks I want to bring into the trunk. Will begin shortly.

To compile for the ESP8266, it is much easier to use Ubuntu.

from colorchord.

from colorchord.

from colorchord.

That's really good that it works. Really bad that it doesn't work on my Windows installation. I spent most of my time trying to figure that out :(.

Windows 10 does not support monitor as a default devices anymore. You'll have to install Cable. http://www.vb-audio.com/Cable/#DownloadCable

There's a flag like WinAudioNumber or something like that in the default.ini.

The binaries are sitting in the main folder for esp are sitting in the root embedded8266 folder. If you have an old board, you may need to also flash it's init.bin files. I don't know how to do that from Windows though :-/

Closing issue. You may continue to comment, though.

from colorchord.

from colorchord.

This is what I got in the sirial monitor as I try to go to 192.168.4.1

esp82XX Web-GUI
Version: v0.5-26-gfaf53-dev - Build Mon, May 22 2017, 21:56:04 -0400 with -DICACHE_FLASH -DSK6812 -DWEB_PORT=80 -DCOM_PORT=7777 -DBACKEND_PORT=7878 -DSLOWTICK_MS=50�Loading Settings: af / 0 / 69 / 69
Settings Loaded: ESP_17B8D2 / Default
Opmode: 2
Default SoftAP mode: "ESP_17B8D2":""
Boot Ok.
IGMP Joining: 0104a8c0 fb0000e0
MFS Not found at regular address (ffffffff).
MFS Not found at alternative address (ffffffffffffffff).
MFS Found at: 00000000
404(index.html)
MFS Not found at regular address (ffffffff).
MFS Not found at alternative address (ffffffffffffffff).
MFS Found at: 00000000
404(favicon.ico)

from colorchord.

I forgot you will need to flash the web binary.

You may either flash it to exactly 0x10000 (65536) or 0x100000 (1MB boundary). https://github.com/cnlohr/colorchord/blob/master/embedded8266/web/page.mpfs

from colorchord.

from colorchord.

If you can experiment with the Windows build and see if you can get it working with CABLE. Also, if you had any problems please let me know since I still can't get it to work on my Windows install.

from colorchord.

Thanks for your help.
What do you mean by CABLE? I do not have linux installed and I am pretty terrable at coding. I tried to change the audio input source but got no response. I also tried an USB sound card and set it as defult but got no sound. It seems to work only with the built in microphone.

I do have another problem with embedded ESP8266 but I will ask under another issue.

from colorchord.

http://www.vb-audio.com/Cable/#DownloadCable ... and you should be able to select default sound device in Windows to pick which one. But that's an interesting observation. Maybe that feature isn't working right for me, and I'm only able to capture from a null device.

from colorchord.

Anyways, the ESP8266 is working perfectly. THANK YOU!

from colorchord.

@cnlohr I was able to get Cable working with ColorChord on Windows 10.
https://hastebin.com/icehafarun.config
This was my config-- and I ended up setting the VAC output to the default, then setting a loopback on the recording device to output to my speakers. Hacky, but it works.
https://cdn.discordapp.com/attachments/262128321314291712/422647281720754176/2018-03-12_00-49-00.mkv demonstration- proof is in the pudding!

from colorchord.

@hatf0 can you make a new issue for this?

from colorchord.