RGB30V2 cannot be shut down normally about arkos HOT 21 CLOSED

I can’t replicate this issue on my end. Did you recently try any other OS before this issue occurred? If not, does this issue happen with any other OS?

from arkos.

I was using rocknix OS before and this problem did not occur.

from arkos.

Try the stock OS and see if the issue happens there.

from arkos.

After I reinstalled ArkOS_RGB30_v2.0_10162023, I was able to shut down normally... So don't upgrade yet?

from arkos.

Update it again and see if the issue returns.

from arkos.

After updating 03302024, I started not being able to shut down again.

from arkos.

In the fat32 boot partition, Copy the .dtb file contained in the attached zip file into the boot partition overwriting the existing one there. Then boot the device and see if it can shut down properly after that. If it does, boot the device again and see if it shutdown properly again or if the issue returns. Let me know you results.

rk3566-OC.zip

from arkos.

After replacing the rk3566-OC.dtb, I was finally able to shut down normally, and then tried several times to shut down normally. Thank you for providing the solution.

from arkos.

Odd. The issue should have returned after the 2nd boot after replacing that file as the OS is supposed to check if it's a RGB30 V2 unit and replace that file with a v2 dtb for improved performance. You may run into really slow performance with dreamcast and saturn. For dreamcast, you can confirm with a game like power stone. That should run between 50fps to 60 fps. if it runs at half that speed, you're performance is capped

from arkos.

Oh correction. It wouldn't. it puts a check in place to prevent that dtb change a second time. So the issue is because of the v2 dtb. Good to know. Thanks for helping me test this. I'll have to see how best to resolve the shutdown and performance issue with v2 units.

from arkos.

I tried DOA2 and power stone, both are as smooth as before.

from arkos.

🤯

from arkos.

I just discovered that if you turn on the switch power button tap to off , pressing the switch will change it to restart again. Then if you use normal shutdown, it will also return to restart again.

from arkos.

It's strange that I can't fix the problem again using the correction file you gave me, even if I reinstall the stock system.

from arkos.

I got a v2 unit in yesterday and the unit boots and shutsdown without issue on my end

from arkos.

I discovered a very interesting thing. When I reinstalled the arkos system, I still couldn't shut it down normally. But if I use another micro sd card with a rocknix system to run it once, and then shut down and replace it with arkos. Then After that, the host can be turned on and off normally, even if it is set to shut down with one button press.

from arkos.

Very odd. I haven't used ROCKNIX on my V2 unit yet and have not experienced this issue.

from arkos.

Yes, it was very strange but the problem was finally solved. Now one set of mirco sd card is the main using system arkos and the other is rocknix as backup use.

from arkos.

If you encounter this issue again, can you try the rk3566-OC.dtb file from here and let me know if it resolves the issue for you?
#1046 (comment)

from arkos.

Since the last time the problem was fixed, the problem of not shutting down has not occurred again. Instead, I noticed that someone on reddit reported the same problem of not being able to shut down. https://www.reddit.com/r/RGB30/comments/1cc7aqj/arkos_wont_shutdown /

from arkos.

Have them try that then if possible

from arkos.