Can't connect to server about q3lite HOT 6 CLOSED

There's a setting in the autoexec.cfg file that's installed with Q3lite that you may need. Try adding this line to your autoexec.cfg:
seta net_mcast6addr "ff04::696f:7175:616b:6533" // Set multicast address to use for scanning for ipv6 servers on the local network.

from q3lite.

I'm trying to connect to it from my PC using IOQuake3 via the IPv4 address.

from q3lite.

Check the server.cfg file to see if this setting exists:
seta net_enabled "3"

Also try adding the net_mcast6addr line from above to your server.cfg file.

from q3lite.

I think I might have found the issue, I was editing under /usr/local/games/quake3/baseq3 insted of ~/.q3a/baseq3

will report back...

from q3lite.

So removed it, all .q3a folders, re-installed (this time leaving the client in too), and only ran as sudo from pi user and all is looking good now. Basically I didn't RTFM very well.

from q3lite.

Glad to hear it's working. Have fun with it.

from q3lite.