Comments (31)
The Linux Machine
from breath.
Within ChromeOS, post the output of lspci -v
.
from breath.
`lspci -v` output
00:00.0 Host bridge: Intel Corporation Device 31f0 (rev 06)
Subsystem: Intel Corporation Device 31f0
Flags: bus master, fast devsel, latency 0
00:00.1 Signal processing controller: Intel Corporation Device 318c (rev 06)
Subsystem: Intel Corporation Device 318c
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at c1110000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [d0] Power Management version 3
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: proc_thermal
00:02.0 VGA compatible controller: Intel Corporation Device 3184 (rev 06) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device 2212
Flags: bus master, fast devsel, latency 0, IRQ 120
Memory at c0000000 (64-bit, non-prefetchable) [size=16M]
Memory at b0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 1000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [100] Process Address Space ID (PASID)
Capabilities: [200] Address Translation Service (ATS)
Capabilities: [300] Page Request Interface (PRI)
Kernel driver in use: i915
00:0c.0 Network controller: Intel Corporation Device 31dc (rev 06)
Subsystem: Intel Corporation Device 0034
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at c1118000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
Capabilities: [100] #00
Capabilities: [14c] Latency Tolerance Reporting
Capabilities: [164] Vendor Specific Information: ID=0010 Rev=0 Len=014 <?>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
00:0e.0 Multimedia audio controller: Intel Corporation Device 3198 (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 131
Memory at c111c000 (64-bit, non-prefetchable) [size=16K]
Memory at c1000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 3
Capabilities: [80] Vendor Specific Information: Len=14 <?>
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Kernel driver in use: sof-audio-pci
Kernel modules: snd_hda_intel, sof_pci_dev
00:15.0 USB controller: Intel Corporation Device 31a8 (rev 06) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Device 31a8
Flags: bus master, medium devsel, latency 0, IRQ 121
Memory at c1100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: xhci_hcd
00:16.0 Signal processing controller: Intel Corporation Device 31ac (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at c1125000 (64-bit, non-prefetchable) [size=4K]
Memory at c1126000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:16.1 Signal processing controller: Intel Corporation Device 31ae (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at c1127000 (64-bit, non-prefetchable) [size=4K]
Memory at c1128000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:17.0 Signal processing controller: Intel Corporation Device 31b4 (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 31
Memory at c1129000 (64-bit, non-prefetchable) [size=4K]
Memory at c112a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:17.1 Signal processing controller: Intel Corporation Device 31b6 (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at c112b000 (64-bit, non-prefetchable) [size=4K]
Memory at c112c000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:17.2 Signal processing controller: Intel Corporation Device 31b8 (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 33
Memory at c112d000 (64-bit, non-prefetchable) [size=4K]
Memory at c112e000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:17.3 Signal processing controller: Intel Corporation Device 31ba (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 34
Memory at c112f000 (64-bit, non-prefetchable) [size=4K]
Memory at c1130000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:18.0 Signal processing controller: Intel Corporation Device 31bc (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 4
Memory at c1131000 (64-bit, non-prefetchable) [size=4K]
Memory at c1132000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:18.2 Signal processing controller: Intel Corporation Device 31c0 (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 6
Memory at c1133000 (64-bit, non-prefetchable) [size=4K]
Memory at c1134000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:19.0 Signal processing controller: Intel Corporation Device 31c2 (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 35
Memory at c1135000 (64-bit, non-prefetchable) [size=4K]
Memory at c1136000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:19.2 Signal processing controller: Intel Corporation Device 31c6 (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 37
Memory at c1137000 (64-bit, non-prefetchable) [size=4K]
Memory at c1138000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
00:1c.0 SD Host controller: Intel Corporation Device 31cc (rev 06) (prog-if 01)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 39
Memory at c1139000 (64-bit, non-prefetchable) [size=4K]
Memory at c113a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: sdhci-pci
00:1f.0 ISA bridge: Intel Corporation Device 3197 (rev 06)
Subsystem: Intel Corporation Device 7270
Flags: fast devsel
Kernel driver in use: lpc_ich
00:1f.1 SMBus: Intel Corporation Device 31d4 (rev 06)
Subsystem: Intel Corporation Device 31d4
Flags: medium devsel
Memory at c113b000 (64-bit, non-prefetchable) [size=256]
I/O ports at 1040 [size=32]
Kernel driver in use: i801_smbus
from breath.
Now I know your touchpad isn't connected via PCI. Could you paste the text after pressing expand in hack-33025-touchpad
in chrome://system
?
from breath.
hack-33025-touchpad
ID 9:
Device 'Synaptics TM3510-001':
Accel Max dt (0): 0.050000
Accel Min dt (1): 0.003000
Active Area Bottom (2): 1494
Active Area Left (3): 0
Active Area Right (4): 2060
Active Area Top (5): 0
Australian Scrolling (6): 40010624
Bottom Zone Size (7): 10.000000
Box Height (8): 0.000000
Box Width (9): 0.000000
Button Evaluation Timeout (10): 0.050000
Button Finger Timeout (11): 0.030000
Button Max Distance From Expected (12): 20.000000
Button Move Distance (13): 10.000000
Button Right Click Zone Enable (14): 40010624
Button Right Click Zone Size (15): 20.000000
Change Min Move Distance (16): 3.000000
Change Timeout (17): 0.200000
Click Drag Min Slope (18): 2.220000
Click Drag Pressure Diff Factor (19): 1.200000
Click Drag Pressure Diff Thresh (20): 10.000000
Compute Surface Area from Pressure (21): 40010624
Damp Scroll Min Move Factor (22): 0.200000
Delay On Possible Liftoff (23): 40010624
Device Mouse (24): 40010624
Device Node (25): "/dev/input/event10"
Device Pointing Stick (26): 40010624
Device Product ID (27): -12874
Device Touchpad (28): 40010624
Device Vendor ID (29): 1739
Drumroll Co Move Ratio (30): 1.200000
Drumroll Max Speed Change Factor (31): 15.000000
Drumroll Speed Thresh (32): 400.000000
Drumroll Suppression Enable (33): 40010624
Dump Debug Log (34): 40010624
Evaluation Timeout (35): 0.150000
Event Logging Enable (36): 40010624
Fake Timestamp Delta (37): 0.000000
Fat Finger Min Move Distance (38): 15.000000
Fat Finger Pressure Ratio (39): 1.400000
Fat Finger Width Ratio (40): 1.300000
Filter Low Pressure (41): 40010624
Finger Merge Distance Thresh (42): 140.000000
Finger Merge Filter Enabled (43): 40010624
Finger Merge Maximum Pressure (44): 83.000000
Finger Merge Min Pressure (45): 51.000000
Finger Merge Minimum Touch Major (46): 280.000000
Finger Moving Energy (47): 0.012000
Finger Moving Hysteresis (48): 0.006000
Fling Buffer Depth (49): 10
Fling Buffer Min Avg Speed (50): 10.000000
Fling Buffer Suppress Zero Length Scrolls (51): 40010624
Fling Stop Extra Delay (52): 0.055000
Fling Stop Timeout (53): 0.030000
Force Touch Count To Match Finger Count (54): 40010624
Four Finger Swipe Distance Ratio (55): 0.200000
Four Finger Swipe Distance Thresh (56): 1.500000
Horizontal Resolution (57): 20
Horizontal Scroll Snap Slope (58): 0.577350
Hysteresis Pinch Scale Resolution Squared (59): 1.050000
Input Queue Delay (60): 0.000000
Input Queue Max Delay (61): 0.017000
Input Queue Min Nonsuppression Speed (62): 200.000000
Integrated Touchpad (63): 40010624
Inter-Tap Timeout (64): 0.150000
Inward Pinch Minimum Angle (65): 0.300000
Keyboard Palm Prevent Timeout (66): 0.500000
Keyboard Touched Timeval High (67): 0
Keyboard Touched Timeval Low (68): 0
Liftoff Speed Factor (69): 5.000000
Log Path (70): "/var/log/xorg/touchpad_activity_log.txt"
Logging Notify (71): 0
Logging Reset (72): 0
Max Allowed Pressure Change Per Sec (73): 800.000000
Max Finger Stationary Speed (74): 0.000000
Max Hysteresis Pressure Per Sec (75): 600.000000
Max Pressure Change Duration (76): 0.016000
Max Stationary Move Speed (77): 0.000000
Max Stationary Move Speed Hysteresis (78): 0.000000
Max Stationary Move Suppress Distance (79): 1.000000
Merged Finger Max Age (80): 0.350000
Merged Finger Max X Move (81): 180.000000
Merged Finger Max Y Move (82): 60.000000
Merged Finger Suspicious Angle Min Displacement (83): 7.000000
Merged Finger Touch Major Pressure Ratio (84): 5.000000
Merged Finger Touch Major Thresh (85): 380.000000
Merged Finger X Jump Max Disp (86): 9.000000
Merged Finger X Jump Min Disp (87): 6.000000
Metrics Mouse Moving Time (88): 0.050000
Metrics Mouse Warmup Session (89): 100
Metrics Noisy Ground Distance (90): 10.000000
Metrics Noisy Ground Time (91): 0.100000
Min Interpolate Period (92): 0.021000
Minimum Movement Direction Detection (93): 0.003000
Minimum Pinch Scale Resolution Squared (94): 1.005000
Motion Tap Prevent Timeout (95): 0.050000
Mouse Accel Curves (96): 40010624
Mouse CPI (97): 1000.000000
Mouse Pointer Accel Curve (98): inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000
Mouse Scroll Curves (99): 40010624
Move Lock Speed (100): 10.000000
Move Report Distance (101): 0.350000
Multiple Palm Width (102): 75.000000
Old Mouse Accel Curves (103): 40010624
One Finger Click Wiggle Timeout (104): 0.200000
Orientation Maximum (105): 1
Orientation Minimum (106): 0
Palm Edge Zone Min Point Speed (107): 100.000000
Palm Edge Zone Width (108): 14.000000
Palm Eval Timeout (109): 0.100000
Palm Filter Top Edge Enable (110): 40010624
Palm Pointing Max Reverse Move Distance (111): 0.300000
Palm Pointing Min Move Distance (112): 8.000000
Palm Pressure (113): 200.000000
Palm Split Maximum Distance (114): 4.000000
Palm Stationary Distance (115): 4.000000
Palm Stationary Time (116): 2.000000
Palm Width (117): 21.200000
Pinch Certain Minimum Movement (118): 8.000000
Pinch Enable (119): 40010624
Pinch Evaluation Timeout (120): 0.100000
Pinch Guess Consistent Movement Ratio (121): 0.400000
Pinch Guess Minimum Movement (122): 2.000000
Pinch Initial Scale Time Inverse (123): 3.330000
Pinch Noise Level Squared (124): 2.000000
Pinch Thumb Minimum Movement (125): 1.410000
Pinch Zoom Maximum Angle (126): -0.400000
Pinch Zoom Minimum Events (127): 3
Point X Out Scale (128): 1.000000
Point Y Out Scale (129): 1.000000
Pointer Accel Curve (130): inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000
Pointer Acceleration (131): 40010624
Pointer Sensitivity (132): 3
Pressure Calibration Offset (133): -51.176600
Pressure Calibration Slope (134): 1.771600
Pressure Minimum Threshold (135): 0.000000
Quick Acceleration Factor (136): 0.000000
Quick Move Distance Thresh (137): 3.000000
Raw Touch Passthrough (138): 40010624
Right Click Second Finger Age Thresh (139): 0.500000
Right Click Start Time Diff Thresh (140): 0.100000
Scroll Accel Curve (141): inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000, inf, 0.000000, 1.000000, 0.000000
Scroll Minimum Angle (142): -0.200000
Scroll Sensitivity (143): 3
Scroll X Out Scale (144): 2.500000
Scroll Y Out Scale (145): 2.500000
Smooth Accel (146): 40010624
Stationary Pinch Scale Resolution Squared (147): 1.050000
Stationary Pinch Time (148): 0.100000
Stationary Wiggle Filter Enabled (149): 40010624
Suppress Immediate Tapdown (150): 40010624
T5R2 Three Finger Click Enable (151): 40010624
Tap Drag Delay (152): 0.000000
Tap Drag Enable (153): 40010624
Tap Drag Lock Enable (154): 40010624
Tap Drag Stationary Time (155): 0.000000
Tap Drag Timeout (156): 0.300000
Tap Enable (157): 40010624
Tap Exclusion Border Width (158): 8.000000
Tap Maximum Finger Age (159): 1.200000
Tap Maximum Movement (160): 0.000100
Tap Min Separation (161): 10.000000
Tap Minimum Pressure (162): 25.000000
Tap Move Distance (163): 2.000000
Tap Paused (164): 40010624
Tap Timeout (165): 0.200000
Three Finger Click Enable (166): 40010624
Three Finger Swipe Distance Ratio (167): 0.200000
Three Finger Swipe Distance Thresh (168): 1.500000
Three Finger Swipe EnableX (169): 40010624
Thumb Click Prevention Timeout (170): 0.150000
Thumb Evaluation Timeout (171): 0.060000
Thumb Movement Factor (172): 0.500000
Thumb Pinch Delay Factor (173): 9.000000
Thumb Pinch Evaluation Timeout (174): 0.250000
Thumb Pinch Minimum Movement (175): 0.800000
Thumb Pinch Movement Ratio (176): 20.000000
Thumb Pinch Threshold Ratio (177): 0.250000
Thumb Slow Pinch Similarity Ratio (178): 5.000000
Thumb Speed Factor (179): 0.500000
Top Edge Tap Exclusion Border Width (180): 3.000000
Touchpad Device Output Bias on X-Axis (181): 0.000000
Touchpad Device Output Bias on Y-Axis (182): 0.000000
Tracing Enabled (183): 40010624
Trend Classifying 2nd-order Motion Enabled (184): 40010624
Trend Classifying Filter Enabled (185): 40010624
Trend Classifying Min Num of Samples (186): 6
Trend Classifying Num of Samples (187): 20
Trend Classifying Z Threshold (188): 2.575829
Two Finger Horizontal Close Distance Thresh (189): 50.000000
Two Finger Move Distance Thresh (190): 7.000000
Two Finger Pressure Diff Factor (191): 1.650000
Two Finger Pressure Diff Thresh (192): 32.000000
Two Finger Scroll Distance Thresh (193): 1.500000
Two Finger Vertical Close Distance Thresh (194): 45.000000
Use Custom Mouse Pointer Accel Curve (195): 40010624
Use Custom Touchpad Pointer Accel Curve (196): 40010624
Use Custom Touchpad Scroll Accel Curve (197): 40010624
Vertical Resolution (198): 20
Vertical Scroll Snap Slope (199): 1.191754
Wiggle Button Down Timeout (200): 0.750000
Wiggle Max Distance (201): 5.500000
Wiggle Timeout (202): 0.075000
Zero Finger Click Enable (203): 40010624
from breath.
Should be fixed now since I compiled in Synaptic drivers. Try running bash updatekernel.sh
on your Linux PC (not your chromebook).
from breath.
Are you referring to my breath USB, or the Linux machine I used to build the USB?
from breath.
Unfortunately, updating the kernel using the script did not fix the issue.
from breath.
Could you attach the output of the commanddmesg
?
from breath.
[ 0.000000] microcode: microcode updated early to revision 0x1c, date = 2021-05-10
[ 0.000000] Linux version 4.14.249-18369-g6e52abcfeab4 (chrome-bot@chromeos-ci-legacy-us-central1-b-x32-136-38of) (Chromium OS 13.0_pre428724_p20210813-r7 clang version 13.0.0 (/var/tmp/portage/sys-devel/llvm-13.0_pre428724_p20210813-r7/work/llvm-13.0_pre428724_p20210813/clang 9968896cd62a62b11ac61085534dd598c4bd3c60)) #1 SMP PREEMPT Sun Dec 12 20:01:44 PST 2021
[ 0.000000] Command line: cros_secure console= loglevel=7 init=/sbin/init cros_secure drm.trace=0x106 root=/dev/dm-0 rootwait ro dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=1 dm="1 vroot none ro 1,0 4710400 verity payload=PARTUUID=495dafc4-484a-d345-8b18-1e5b94585823/PARTNROFF=1 hashtree=PARTUUID=495dafc4-484a-d345-8b18-1e5b94585823/PARTNROFF=1 hashstart=4710400 alg=sha256 root_hexdigest=1843c5df127bc94fbc57bf12457f5dc7d2585cc3890331ea783465718445563a salt=7abfd34c3fb5c2f9915599db5fba97f88847e1f8de9bb76ab4a04af597fbb8c6" noinitrd vt.global_cursor_default=0 kern_guid=495dafc4-484a-d345-8b18-1e5b94585823 add_efi_memmap boot=local noresume noswap i915.modeset=1 gsmi.s0ix_logging_enable=1 intel_idle.slp_s0_check=1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x00000000799f2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000799f3000-0x0000000079ffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe043fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed17fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Google Bobba/Bobba, BIOS Google_Bobba.11297.252.0 01/25/2021
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Initial usec timer 6350069
[ 0.000000] tsc: Detected 1094.400 MHz processor
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 007B000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 00B0000000 mask 7FF0000000 write-combining
[ 0.000000] 4 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 5 base 0200000000 mask 7F80000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x799f3 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8960c0099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 COREv4)
[ 0.000000] ACPI: XSDT 0x0000000079B040E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x0000000079B07340 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x0000000079B04280 0030B2 (v02 COREv4 COREBOOT 20110725 INTL 20180531)
[ 0.000000] ACPI: FACS 0x0000000079B04240 000040
[ 0.000000] ACPI: FACS 0x0000000079B04240 000040
[ 0.000000] ACPI: SSDT 0x0000000079B07440 002134 (v02 COREv4 COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x0000000079B09580 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TPM2 0x0000000079B095C0 00004C (v04 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x0000000079B09610 00006C (v02 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: NHLT 0x0000000079B09680 001A8F (v05 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x0000000079B0D110 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Reserving FACP table memory at [mem 0x79b07340-0x79b07433]
[ 0.000000] ACPI: Reserving DSDT table memory at [mem 0x79b04280-0x79b07331]
[ 0.000000] ACPI: Reserving FACS table memory at [mem 0x79b04240-0x79b0427f]
[ 0.000000] ACPI: Reserving FACS table memory at [mem 0x79b04240-0x79b0427f]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0x79b07440-0x79b09573]
[ 0.000000] ACPI: Reserving MCFG table memory at [mem 0x79b09580-0x79b095bb]
[ 0.000000] ACPI: Reserving TPM2 table memory at [mem 0x79b095c0-0x79b0960b]
[ 0.000000] ACPI: Reserving APIC table memory at [mem 0x79b09610-0x79b0967b]
[ 0.000000] ACPI: Reserving NHLT table memory at [mem 0x79b09680-0x79b0b10e]
[ 0.000000] ACPI: Reserving HPET table memory at [mem 0x79b0d110-0x79b0d147]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000012151000-0x00000000799f2fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[ 0.000000] On node 0 totalpages: 2062401
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7587 pages used for memmap
[ 0.000000] DMA32 zone: 485538 pages, LIFO batch:31
[ 0.000000] Normal zone: 24576 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] TSC deadline timer available
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0xa3/0x4d1 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 43 pages/cpu s135400 r8192 d32536 u524288
[ 0.000000] pcpu-alloc: s135400 r8192 d32536 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2030152
[ 0.000000] Kernel command line: cros_secure console= loglevel=7 init=/sbin/init cros_secure drm.trace=0x106 root=/dev/dm-0 rootwait ro dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=1 dm="1 vroot none ro 1,0 4710400 verity payload=PARTUUID=495dafc4-484a-d345-8b18-1e5b94585823/PARTNROFF=1 hashtree=PARTUUID=495dafc4-484a-d345-8b18-1e5b94585823/PARTNROFF=1 hashstart=4710400 alg=sha256 root_hexdigest=1843c5df127bc94fbc57bf12457f5dc7d2585cc3890331ea783465718445563a salt=7abfd34c3fb5c2f9915599db5fba97f88847e1f8de9bb76ab4a04af597fbb8c6" noinitrd vt.global_cursor_default=0 kern_guid=495dafc4-484a-d345-8b18-1e5b94585823 add_efi_memmap boot=local noresume noswap i915.modeset=1 gsmi.s0ix_logging_enable=1 intel_idle.slp_s0_check=1
[ 0.000000] device-mapper: init: will configure 1 devices
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Memory: 8015316K/8249604K available (12316K kernel code, 1228K rwdata, 3312K rodata, 1504K init, 676K bss, 234288K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 39352 entries in 154 pages
[ 0.001000] Preemptible hierarchical RCU implementation.
[ 0.001000] Tasks RCU enabled.
[ 0.001000] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[ 0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.001000] hpet clockevent registered
[ 0.001000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=1094400)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.001000] ACPI: Core revision 20170728
[ 0.001000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.001000] Security Framework initialized
[ 0.001000] Yama: becoming mindful.
[ 0.001000] LoadPin: ready to pin (currently enabled)
[ 0.001000] Chromium OS LSM: enabled
[ 0.001000] SELinux: Initializing.
[ 0.001000] SELinux: Starting in permissive mode
[ 0.001000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.001000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.001000] CPU0: Thermal monitoring enabled (TM1)
[ 0.001000] process: using mwait in idle threads
[ 0.001000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.001000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.001000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.001000] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.001000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.001000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.001000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.001000] Freeing SMP alternatives memory: 36K
[ 0.001000] smpboot: Max logical packages: 1
[ 0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.010963] smpboot: CPU0: Intel(R) Pentium(R) Silver N5030 CPU @ 1.10GHz (family: 0x6, model: 0x7a, stepping: 0x8)
[ 0.014007] Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.014024] ... version: 4
[ 0.014026] ... bit width: 48
[ 0.014027] ... generic registers: 4
[ 0.014028] ... value mask: 0000ffffffffffff
[ 0.014029] ... max period: 00007fffffffffff
[ 0.014030] ... fixed-purpose events: 3
[ 0.014031] ... event mask: 000000070000000f
[ 0.016003] Hierarchical SRCU implementation.
[ 0.020107] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.022003] smp: Bringing up secondary CPUs ...
[ 0.030012] x86: Booting SMP configuration:
[ 0.030014] .... node #0, CPUs: #1 #2 #3
[ 0.046719] smp: Brought up 1 node, 4 CPUs
[ 0.046719] smpboot: Total of 4 processors activated (8755.20 BogoMIPS)
[ 0.047051] CPU3: update max cpu_capacity 1024
[ 0.047558] devtmpfs: initialized
[ 0.048227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.048233] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.048280] pinctrl core: initialized pinctrl subsystem
[ 0.048399] RTC time: 22:15:54, date: 12/26/21
[ 0.049670] NET: Registered protocol family 16
[ 0.050014] cpuidle: using governor ladder
[ 0.050020] cpuidle: using governor menu
[ 0.050251] clocksource: Switched to clocksource tsc-early
[ 0.050260] ACPI: bus type PCI registered
[ 0.050324] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.050328] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.050344] PCI: Using configuration type 1 for base access
[ 0.050759] CPU1: update max cpu_capacity 1024
[ 0.052924] ACPI: Added _OSI(Module Device)
[ 0.052926] ACPI: Added _OSI(Processor Device)
[ 0.052927] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.052929] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.053170] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.055213] ACPI: EC: EC started
[ 0.055215] ACPI: EC: interrupt blocked
[ 0.055347] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.055350] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.055352] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.055353] ACPI: Interpreter enabled
[ 0.055367] ACPI: (supports S0 S3 S5)
[ 0.055369] ACPI: Using IOAPIC for interrupt routing
[ 0.055382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.055566] ACPI: Enabled 1 GPEs in block 00 to 7F
[ 0.056211] ACPI: Power Resource [PXP] (on)
[ 0.164096] ACPI: Power Resource [PXP] (on)
[ 0.272444] ACPI: Power Resource [PRIC] (on)
[ 0.294681] ACPI: Power Resource [PRIC] (on)
[ 0.319098] ACPI: Power Resource [PRIC] (on)
[ 0.374091] ACPI: Power Resource [PRIC] (on)
[ 0.461517] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.461524] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.461567] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.461692] PCI host bridge to bus 0000:00
[ 0.461695] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.461697] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
[ 0.461699] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.461701] pci_bus 0000:00: root bus resource [mem 0x7b000000-0x7fffffff window]
[ 0.461703] pci_bus 0000:00: root bus resource [mem 0x80000000-0xe0000000 window]
[ 0.461705] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.461719] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[ 0.461856] pci 0000:00:00.1: [8086:318c] type 00 class 0x118000
[ 0.461886] pci 0000:00:00.1: reg 0x10: [mem 0xc1110000-0xc1117fff 64bit]
[ 0.462054] pci 0000:00:02.0: [8086:3184] type 00 class 0x030000
[ 0.462064] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[ 0.462070] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.462074] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.462219] pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000
[ 0.462253] pci 0000:00:0c.0: reg 0x10: [mem 0xc1118000-0xc111bfff 64bit]
[ 0.462359] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
[ 0.462499] pci 0000:00:0e.0: [8086:3198] type 00 class 0x040100
[ 0.462521] pci 0000:00:0e.0: reg 0x10: [mem 0xc111c000-0xc111ffff 64bit]
[ 0.462546] pci 0000:00:0e.0: reg 0x20: [mem 0xc1000000-0xc10fffff 64bit]
[ 0.462598] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.462717] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[ 0.462739] pci 0000:00:15.0: reg 0x10: [mem 0xc1100000-0xc110ffff 64bit]
[ 0.462798] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.462918] pci 0000:00:16.0: [8086:31ac] type 00 class 0x118000
[ 0.462946] pci 0000:00:16.0: reg 0x10: [mem 0xc1125000-0xc1125fff 64bit]
[ 0.462960] pci 0000:00:16.0: reg 0x18: [mem 0xc1126000-0xc1126fff 64bit]
[ 0.463121] pci 0000:00:16.1: [8086:31ae] type 00 class 0x118000
[ 0.463149] pci 0000:00:16.1: reg 0x10: [mem 0xc1127000-0xc1127fff 64bit]
[ 0.463163] pci 0000:00:16.1: reg 0x18: [mem 0xc1128000-0xc1128fff 64bit]
[ 0.463353] pci 0000:00:17.0: [8086:31b4] type 00 class 0x118000
[ 0.463380] pci 0000:00:17.0: reg 0x10: [mem 0xc1129000-0xc1129fff 64bit]
[ 0.463395] pci 0000:00:17.0: reg 0x18: [mem 0xc112a000-0xc112afff 64bit]
[ 0.463541] pci 0000:00:17.1: [8086:31b6] type 00 class 0x118000
[ 0.463568] pci 0000:00:17.1: reg 0x10: [mem 0xc112b000-0xc112bfff 64bit]
[ 0.463583] pci 0000:00:17.1: reg 0x18: [mem 0xc112c000-0xc112cfff 64bit]
[ 0.463732] pci 0000:00:17.2: [8086:31b8] type 00 class 0x118000
[ 0.463760] pci 0000:00:17.2: reg 0x10: [mem 0xc112d000-0xc112dfff 64bit]
[ 0.463774] pci 0000:00:17.2: reg 0x18: [mem 0xc112e000-0xc112efff 64bit]
[ 0.463921] pci 0000:00:17.3: [8086:31ba] type 00 class 0x118000
[ 0.463949] pci 0000:00:17.3: reg 0x10: [mem 0xc112f000-0xc112ffff 64bit]
[ 0.463963] pci 0000:00:17.3: reg 0x18: [mem 0xc1130000-0xc1130fff 64bit]
[ 0.464131] pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
[ 0.464160] pci 0000:00:18.0: reg 0x10: [mem 0xc1131000-0xc1131fff 64bit]
[ 0.464175] pci 0000:00:18.0: reg 0x18: [mem 0xc1132000-0xc1132fff 64bit]
[ 0.464324] pci 0000:00:18.2: [8086:31c0] type 00 class 0x118000
[ 0.464353] pci 0000:00:18.2: reg 0x10: [mem 0xc1133000-0xc1133fff 64bit]
[ 0.464367] pci 0000:00:18.2: reg 0x18: [mem 0xc1134000-0xc1134fff 64bit]
[ 0.464531] pci 0000:00:19.0: [8086:31c2] type 00 class 0x118000
[ 0.464575] pci 0000:00:19.0: reg 0x10: [mem 0xc1135000-0xc1135fff 64bit]
[ 0.464589] pci 0000:00:19.0: reg 0x18: [mem 0xc1136000-0xc1136fff 64bit]
[ 0.464737] pci 0000:00:19.2: [8086:31c6] type 00 class 0x118000
[ 0.464765] pci 0000:00:19.2: reg 0x10: [mem 0xc1137000-0xc1137fff 64bit]
[ 0.464780] pci 0000:00:19.2: reg 0x18: [mem 0xc1138000-0xc1138fff 64bit]
[ 0.464948] pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501
[ 0.464975] pci 0000:00:1c.0: reg 0x10: [mem 0xc1139000-0xc1139fff 64bit]
[ 0.464989] pci 0000:00:1c.0: reg 0x18: [mem 0xc113a000-0xc113afff 64bit]
[ 0.465164] pci 0000:00:1f.0: [8086:3197] type 00 class 0x060100
[ 0.465338] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[ 0.465396] pci 0000:00:1f.1: reg 0x10: [mem 0xc113b000-0xc113b0ff 64bit]
[ 0.465458] pci 0000:00:1f.1: reg 0x20: [io 0x1040-0x105f]
[ 0.465619] pci_bus 0000:00: on NUMA node 0
[ 0.466521] gpiochip_find_base: found new base at 432
[ 0.466576] gpio gpiochip0: (INT3453:00): added GPIO chardev (254:0)
[ 0.466591] gpiochip_setup_dev: registered GPIOs 432 to 511 on device: gpiochip0 (INT3453:00)
[ 0.466595] gpio gpiochip0: (INT3453:00): created GPIO range 0->79 ==> INT3453:00 PIN 0->79
[ 0.466735] gpiochip_find_base: found new base at 352
[ 0.466770] gpio gpiochip1: (INT3453:01): added GPIO chardev (254:1)
[ 0.466786] gpiochip_setup_dev: registered GPIOs 352 to 431 on device: gpiochip1 (INT3453:01)
[ 0.466788] gpio gpiochip1: (INT3453:01): created GPIO range 0->79 ==> INT3453:01 PIN 0->79
[ 0.466898] gpiochip_find_base: found new base at 332
[ 0.466932] gpio gpiochip2: (INT3453:02): added GPIO chardev (254:2)
[ 0.466944] gpiochip_setup_dev: registered GPIOs 332 to 351 on device: gpiochip2 (INT3453:02)
[ 0.466946] gpio gpiochip2: (INT3453:02): created GPIO range 0->19 ==> INT3453:02 PIN 0->19
[ 0.467059] gpiochip_find_base: found new base at 297
[ 0.467092] gpio gpiochip3: (INT3453:03): added GPIO chardev (254:3)
[ 0.467105] gpiochip_setup_dev: registered GPIOs 297 to 331 on device: gpiochip3 (INT3453:03)
[ 0.467107] gpio gpiochip3: (INT3453:03): created GPIO range 0->34 ==> INT3453:03 PIN 0->34
[ 0.468832] ACPI: EC: interrupt unblocked
[ 0.468841] ACPI: EC: event unblocked
[ 0.468854] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.468856] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.469007] SCSI subsystem initialized
[ 0.469054] libata version 3.00 loaded.
[ 0.469082] ACPI: bus type USB registered
[ 0.469099] usbcore: registered new interface driver usbfs
[ 0.469108] usbcore: registered new interface driver hub
[ 0.469115] usbcore: registered new device driver usb
[ 0.469143] media: Linux media interface: v0.10
[ 0.469149] Linux video capture interface: v2.00
[ 0.469243] chromeos_acpi: registering CHSW 0
[ 0.469369] chromeos_acpi: registering VBNV 0
[ 0.469372] chromeos_acpi: registering VBNV 1
[ 0.469577] chromeos_acpi: truncating buffer from 3072 to 1336
[ 0.469757] chromeos_acpi: installed
[ 0.469758] chromeos_acpi: chromeos_acpi: enabling S3 USB wake
[ 0.469761] chromeos_acpi: chromeos_acpi: failed to enable S3 USB wake
[ 0.469780] Advanced Linux Sound Architecture Driver Initialized.
[ 0.469782] PCI: Using ACPI for IRQ routing
[ 0.498834] PCI: pci_cache_line_size set to 64 bytes
[ 0.498920] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.498922] e820: reserve RAM buffer [mem 0x799f3000-0x7bffffff]
[ 0.499367] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.499374] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.516666] VFS: Disk quotas dquot_6.6.0
[ 0.516695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.516761] pnp: PnP ACPI init
[ 0.516995] system 00:00: [io 0x0900-0x09fe] has been reserved
[ 0.517008] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.517050] system 00:01: [io 0x0200] has been reserved
[ 0.517053] system 00:01: [io 0x0204] has been reserved
[ 0.517055] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.517057] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.517062] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.517099] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.517976] pnp: PnP ACPI: found 3 devices
[ 0.522806] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.522858] pmc-ipc-plat INT34D2:00: io res: [io 0x0400-0x047f]
[ 0.522860] pmc-ipc-plat INT34D2:00: punit BIOS data res: [mem 0xfed17080-0xfed17083]
[ 0.522862] pmc-ipc-plat INT34D2:00: punit BIOS interface res: [mem 0xfed17084-0xfed17087]
[ 0.522880] pmc-ipc-plat INT34D2:00: ipc res: [mem 0xfe042000-0xfe043fff]
[ 0.522882] pmc-ipc-plat INT34D2:00: telemetry ssram res: [mem 0xfe900000-0xfe901fff]
[ 0.522983] intel_punit_ipc intel_punit_ipc: Invalid IRQ, using polling mode
[ 0.523006] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.523008] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
[ 0.523009] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.523011] pci_bus 0000:00: resource 7 [mem 0x7b000000-0x7fffffff window]
[ 0.523012] pci_bus 0000:00: resource 8 [mem 0x80000000-0xe0000000 window]
[ 0.523087] NET: Registered protocol family 2
[ 0.523238] IP idents hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.524315] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.524430] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.524794] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.524836] UDP hash table entries: 4096 (order: 6, 393216 bytes)
[ 0.524894] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes)
[ 0.525012] NET: Registered protocol family 1
[ 0.525039] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.525507] PCI: CLS 64 bytes, default 64
[ 0.525569] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.525571] software IO TLB: mapped [mem 0x759f3000-0x799f3000] (64MB)
[ 0.525826] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 0.525828] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.525829] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.525831] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.525832] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.526073] kvm: already loaded the other module
[ 0.526078] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.526097] clocksource: Switched to clocksource tsc
[ 0.526127] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.526560] Scanning for low memory corruption every 60 seconds
[ 0.526992] audit: initializing netlink subsys (disabled)
[ 0.527203] Initialise system trusted keyrings
[ 0.527217] audit: type=2000 audit(1640556953.526:1): state=initialized audit_enabled=0 res=1
[ 0.527245] workingset: timestamp_bits=61 max_order=21 bucket_order=0
[ 0.528735] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.528828] Registering esdfs 0.2
[ 0.528872] alt_syscall: table 'read_write_test' available.
[ 0.528883] alt_syscall: table 'android' available.
[ 0.528894] alt_syscall: table 'android_permissive' available.
[ 0.528902] alt_syscall: table 'third_party' available.
[ 0.528911] alt_syscall: table 'third_party_permissive' available.
[ 0.528919] alt_syscall: table 'complete' available.
[ 0.528927] alt_syscall: table 'complete_permissive' available.
[ 0.528929] SELinux: Registering netfilter hooks
[ 0.530120] Key type asymmetric registered
[ 0.530123] Asymmetric key parser 'x509' registered
[ 0.530134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.530136] io scheduler noop registered
[ 0.530138] io scheduler deadline registered
[ 0.530158] io scheduler cfq registered (default)
[ 0.530160] io scheduler mq-deadline registered
[ 0.530161] io scheduler kyber registered
[ 0.530303] intel_idle: MWAIT substates: 0x11242020
[ 0.530304] intel_idle: v0.4.1 model 0x7A
[ 0.530514] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.530624] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input0
[ 0.530684] ACPI: Lid Switch [LID0]
[ 0.530725] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.530753] ACPI: Sleep Button [SLP]
[ 0.530789] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.530814] ACPI: Power Button [PWRF]
[ 0.531235] Non-volatile memory driver v1.3
[ 0.531308] Linux agpgart interface v0.103
[ 0.531981] [drm] Memory usable by graphics device = 4096M
[ 0.532892] ACPI: Battery Slot [BAT0] (battery present)
[ 0.584215] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.584221] [drm] Driver supports precise vblank timestamp query.
[ 0.591713] [drm] Initialized i915 1.6.0 20170907 for 0000:00:02.0 on minor 0
[ 0.592026] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 1
[ 0.592041] usbcore: registered new interface driver udl
[ 0.593584] loop: module loaded
[ 0.593595] lkdtm: No crash points registered, enable through debugfs
[ 0.594304] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 0.596860] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 0.599386] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 0.601735] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 0.604203] idma64 idma64.4: Found Intel integrated DMA 64-bit
[ 0.605631] i2c i2c-10: failed to add I2C device ELAN0000:00 from ACPI
[ 0.607148] idma64 idma64.5: Found Intel integrated DMA 64-bit
[ 0.608816] i2c i2c-11: failed to add I2C device ELAN0001:00 from ACPI
[ 0.609018] i2c i2c-11: failed to add I2C device GTCH7502:00 from ACPI
[ 0.610362] idma64 idma64.6: Found Intel integrated DMA 64-bit
[ 0.610977] idma64 idma64.8: Found Intel integrated DMA 64-bit
[ 0.618773] cr50_spi spi-PRP0001:00: TPM ready IRQ confirmed on attempt 1.
[ 0.628497] random: fast init done
[ 0.631633] cr50_spi spi-PRP0001:00: 2.0 TPM (device-id 0x28, rev-id 0)
[ 0.725245] cr50_spi spi-PRP0001:00: Cr50 firmware version: B2-C:0 RO_B:0.0.11/4d655eab RW_B:0.5.51/cr50_v1.9311_mp.105-ccda
[ 0.725713] idma64 idma64.9: Found Intel integrated DMA 64-bit
[ 0.726409] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 0.726411] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 0.726412] mdio_bus fixed-0: lookup for GPIO reset failed
[ 0.726416] libphy: Fixed MDIO Bus: probed
[ 0.726418] PPP generic driver version 2.4.2
[ 0.726453] PPP MPPE Compression module registered
[ 0.726486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.726488] ehci-pci: EHCI PCI platform driver
[ 0.726498] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.726502] ohci-pci: OHCI PCI platform driver
[ 0.726512] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.726699] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 0.726732] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 0.727833] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.727839] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 0.727930] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.14
[ 0.727932] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.727934] usb usb1: Product: xHCI Host Controller
[ 0.727935] usb usb1: Manufacturer: Linux 4.14.249-18369-g6e52abcfeab4 xhci-hcd
[ 0.727937] usb usb1: SerialNumber: 0000:00:15.0
[ 0.728068] hub 1-0:1.0: USB hub found
[ 0.728102] hub 1-0:1.0: 9 ports detected
[ 0.728372] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 0.728403] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 0.728406] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 0.728449] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.14
[ 0.728451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.728453] usb usb2: Product: xHCI Host Controller
[ 0.728454] usb usb2: Manufacturer: Linux 4.14.249-18369-g6e52abcfeab4 xhci-hcd
[ 0.728456] usb usb2: SerialNumber: 0000:00:15.0
[ 0.728533] hub 2-0:1.0: USB hub found
[ 0.728550] hub 2-0:1.0: 7 ports detected
[ 0.728789] usbcore: registered new interface driver cdc_acm
[ 0.728790] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.728892] usbcore: registered new interface driver uas
[ 0.728911] usbcore: registered new interface driver usb-storage
[ 0.728920] usbcore: registered new interface driver ums-realtek
[ 0.728941] usbcore: registered new interface driver usbserial
[ 0.728948] usbcore: registered new interface driver usbserial_generic
[ 0.728953] usbserial: USB Serial support registered for generic
[ 0.728977] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.728978] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.729521] i8042: Warning: Keylock active
[ 0.729757] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.730523] raydium_ts i2c-RAYD0001:00: GPIO lookup for consumer reset
[ 0.730525] raydium_ts i2c-RAYD0001:00: using ACPI for GPIO lookup
[ 0.730526] acpi RAYD0001:00: GPIO: looking up reset-gpios
[ 0.730529] acpi RAYD0001:00: GPIO: _DSD returned RAYD0001:00 0 0 0
[ 0.733381] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.734142] random: crng init done
[ 0.889870] input: Raydium Touchscreen as /devices/pci0000:00/0000:00:17.3/i2c_designware.5/i2c-11/i2c-RAYD0001:00/input/input4
[ 0.890233] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.890715] rtc_cmos rtc_cmos: registered as rtc0
[ 0.890731] rtc_cmos rtc_cmos: alarms up to one month, 114 bytes nvram
[ 0.890755] i2c /dev entries driver
[ 0.891268] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A
[ 0.891270] i801_smbus 0000:00:1f.1: PCI INT A: no GSI
[ 0.891294] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 0.891325] genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 00015a00 (timer)
[ 0.891328] i801_smbus 0000:00:1f.1: Failed to allocate irq 0: -16
[ 0.891330] i801_smbus 0000:00:1f.1: SMBus using polling
[ 0.891500] IR NEC protocol handler initialized
[ 0.891501] IR RC5(x/sz) protocol handler initialized
[ 0.891503] IR RC6 protocol handler initialized
[ 0.891504] IR JVC protocol handler initialized
[ 0.891505] IR Sony protocol handler initialized
[ 0.891506] IR SANYO protocol handler initialized
[ 0.891508] IR Sharp protocol handler initialized
[ 0.891509] IR MCE Keyboard/mouse protocol handler initialized
[ 0.891510] IR XMP protocol handler initialized
[ 0.893033] proc_thermal 0000:00:00.1: Creating sysfs group for PROC_THERMAL_PCI
[ 0.893069] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 0.893087] iTCO_wdt: Found a Apollo Lake SoC TCO device (Version=5, TCOBASE=0x0460)
[ 0.893142] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 0.893151] iTCO_vendor_support: vendor-support=0
[ 0.893223] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[ 0.893325] device-mapper: verity-chromeos: dm-verity-chromeos registered
[ 0.893333] intel_pstate: Intel P-state driver initializing
[ 0.893665] sdhci: Secure Digital Host Controller Interface driver
[ 0.893666] sdhci: Copyright(c) Pierre Ossman
[ 0.893700] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6)
[ 0.894121] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[ 0.894537] Registered efivars operations
[ 0.894541] gsmi version 1.0 loaded
[ 0.895015] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.895130] usbcore: registered new interface driver usbhid
[ 0.895131] usbhid: USB HID core driver
[ 0.970134] usb 1-7: new high-speed USB device number 2 using xhci_hcd
[ 0.996941] mmc0: new HS400 MMC card at address 0001
[ 0.997173] mmcblk0: mmc0:0001 DA4064 58.2 GiB
[ 0.997299] mmcblk0boot0: mmc0:0001 DA4064 partition 1 4.00 MiB
[ 0.997361] mmcblk0boot1: mmc0:0001 DA4064 partition 2 4.00 MiB
[ 0.997418] mmcblk0rpmb: mmc0:0001 DA4064 partition 3 16.0 MiB, chardev (243:0)
[ 0.999339] input: WCOM50C1:00 2D1F:0069 as /devices/pci0000:00/0000:00:16.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:0069.0001/input/input5
[ 0.999423] hid-generic 0018:2D1F:0069.0001: input,hidraw0: I2C HID v1.00 Device [WCOM50C1:00 2D1F:0069] on i2c-WCOM50C1:00
[ 1.000351] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
[ 1.068518] ashmem: initialized
[ 1.068522] intel_telemetry_core Init
[ 1.068524] intel_telemetry: version 1.0.0 loaded
[ 1.069277] chromeos ramoops using acpi device.
[ 1.069311] persistent_ram: no valid data in buffer (sig = 0xcfb8ce29)
[ 1.069315] persistent_ram: no valid data in buffer (sig = 0xe1c7e197)
[ 1.069318] persistent_ram: no valid data in buffer (sig = 0x78a168e0)
[ 1.069320] persistent_ram: no valid data in buffer (sig = 0x82eb93ea)
[ 1.069322] persistent_ram: no valid data in buffer (sig = 0x32a9b3a8)
[ 1.069382] pstore: using zlib compression
[ 1.069699] console [pstore-1] enabled
[ 1.069731] pstore: Registered ramoops as persistent store backend
[ 1.069734] ramoops: attached 0x100000@0x79a04000, ecc: 0/0
[ 1.069805] input: Tablet Mode Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/PNP0C09:00/GOOG0006:00/input/input6
[ 1.073103] cros_ec_lpcs GOOG0004:00: MKBP support version 2
[ 1.104580] cros_ec_lpcs GOOG0004:00: Chrome EC device registered
[ 1.104961] intel_rapl: Found RAPL domain package
[ 1.104965] intel_rapl: Found RAPL domain core
[ 1.104968] intel_rapl: Found RAPL domain uncore
[ 1.104972] intel_rapl: Found RAPL domain dram
[ 1.105819] GACT probability NOT on
[ 1.105823] Netfilter messages via NETLINK v0.30.
[ 1.106062] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 1.106133] ctnetlink v0.93: registering with nfnetlink.
[ 1.106321] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.106417] Initializing XFRM netlink socket
[ 1.106505] NET: Registered protocol family 10
[ 1.106890] Segment Routing with IPv6
[ 1.106908] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.106973] NET: Registered protocol family 17
[ 1.106978] NET: Registered protocol family 15
[ 1.107696] usb 1-7: New USB device found, idVendor=04f2, idProduct=b567, bcdDevice=32.69
[ 1.107699] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.107702] usb 1-7: Product: HD WebCam
[ 1.107704] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.107910] mce: Using 7 MCE banks
[ 1.107959] microcode: sig=0x706a8, pf=0x1, revision=0x1c
[ 1.108099] microcode: Microcode Update Driver: v2.2.
[ 1.108108] SSE version of gcm_enc/dec engaged.
[ 1.109214] sched_clock: Marking stable (1109208842, 0)->(1322467933, -213259091)
[ 1.109323] registered taskstats version 1
[ 1.109326] Loading compiled-in X.509 certificates
[ 1.109592] Key type encrypted registered
[ 1.117958] Magic number: 1:48:301
[ 1.118425] input: PRP0001:01 as /devices/pci0000:00/0000:00:16.0/PRP0001:01/input/input7
[ 1.118629] ALSA device list:
[ 1.118632] No soundcards found.
[ 1.118648] Warning: unable to open an initial console.
[ 1.118658] device-mapper: init: attempting early device configuration.
[ 1.118902] device-mapper: init: adding target '0 4710400 verity payload=PARTUUID=495dafc4-484a-d345-8b18-1e5b94585823/PARTNROFF=1 hashtree=PARTUUID=495dafc4-484a-d345-8b18-1e5b94585823/PARTNROFF=1 hashstart=4710400 alg=sha256 root_hexdigest=1843c5df127bc94fbc57bf12457f5dc7d2585cc3890331ea783465718445563a salt=7abfd34c3fb5c2f9915599db5fba97f88847e1f8de9bb76ab4a04af597fbb8c6'
[ 1.118909] device-mapper: verity: Argument 0: 'payload=PARTUUID=495dafc4-484a-d345-8b18-1e5b94585823/PARTNROFF=1'
[ 1.118911] device-mapper: verity: Argument 1: 'hashtree=PARTUUID=495dafc4-484a-d345-8b18-1e5b94585823/PARTNROFF=1'
[ 1.118913] device-mapper: verity: Argument 2: 'hashstart=4710400'
[ 1.118915] device-mapper: verity: Argument 3: 'alg=sha256'
[ 1.118917] device-mapper: verity: Argument 4: 'root_hexdigest=1843c5df127bc94fbc57bf12457f5dc7d2585cc3890331ea783465718445563a'
[ 1.118919] device-mapper: verity: Argument 5: 'salt=7abfd34c3fb5c2f9915599db5fba97f88847e1f8de9bb76ab4a04af597fbb8c6'
[ 1.120730] device-mapper: init: dm-0 is ready
[ 1.136777] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
[ 1.138155] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
[ 1.138166] VFS: Mounted root (ext2 filesystem) readonly on device 254:0.
[ 1.141998] devtmpfs: mounted
[ 1.216269] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.345878] usb 2-3: New USB device found, idVendor=0bda, idProduct=5647, bcdDevice= 0.15
[ 1.345881] usb 2-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.345883] usb 2-3: Product: 8MP World Facing
[ 1.345885] usb 2-3: Manufacturer: Generic
[ 1.345887] usb 2-3: SerialNumber: 200901010001
[ 1.347044] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 1.503122] usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[ 1.503125] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.531313] Freeing unused kernel memory: 1504K
[ 1.531317] Write protecting the kernel read-only data: 18432k
[ 1.533282] Freeing unused kernel memory: 1980K
[ 1.534773] Freeing unused kernel memory: 784K
[ 1.616165] usb 2-6: new SuperSpeed USB device number 3 using xhci_hcd
[ 1.631092] usb 2-6: New USB device found, idVendor=05e3, idProduct=0747, bcdDevice= 8.19
[ 1.631101] usb 2-6: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 1.631104] usb 2-6: Product: USB Storage
[ 1.631107] usb 2-6: Manufacturer: Generic
[ 1.631109] usb 2-6: SerialNumber: 000000000819
[ 1.638499] usb-storage 2-6:1.0: USB Mass Storage device detected
[ 1.638784] scsi host0: usb-storage 2-6:1.0
[ 1.646912] LoadPin: dev(254,0): read-only
[ 1.646923] LoadPin: load pinning engaged.
[ 1.646934] LoadPin: firmware pinned obj="/lib/firmware/i915/glk_dmc_ver1_04.bin" pid=34 cmdline=""
[ 1.650363] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 1.702176] audit: type=1404 audit(1640556954.701:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 1.731207] SELinux: 8192 avtab hash slots, 29557 rules.
[ 1.736478] SELinux: 8192 avtab hash slots, 29557 rules.
[ 1.737858] SELinux: 1 users, 4 roles, 1902 types, 0 bools, 1 sens, 1024 cats
[ 1.737860] SELinux: 99 classes, 29557 rules
[ 1.739030] SELinux: policy capability network_peer_controls=1
[ 1.739036] SELinux: policy capability open_perms=1
[ 1.739038] SELinux: policy capability extended_socket_class=1
[ 1.739039] SELinux: policy capability always_check_network=0
[ 1.739041] SELinux: policy capability cgroup_seclabel=0
[ 1.739042] SELinux: policy capability nnp_nosuid_transition=1
[ 1.739044] SELinux: Completing initialization.
[ 1.739044] SELinux: Setting up existing superblocks.
[ 1.760350] [drm] RC6 on
[ 1.777053] audit: type=1403 audit(1640556954.775:3): policy loaded auid=4294967295 ses=4294967295
[ 1.944836] audit: type=1400 audit(1640556954.943:4): avc: granted { execute } for pid=152 comm="sh" name="crash_reporter" dev="dm-0" ino=49373 scontext=u:r:cros_init_scripts:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file
[ 2.136168] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 2.144999] udevd[173]: starting version 225
[ 2.164287] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 304
[ 2.164294] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 307
[ 2.164295] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 300
[ 2.164297] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 305
[ 2.164299] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 309
[ 2.164301] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 308
[ 2.164302] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 302
[ 2.164304] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 311
[ 2.164306] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 1000
[ 2.412452] EXT4-fs (mmcblk0p1): recovery complete
[ 2.412780] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600,discard
[ 2.416490] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[ 2.546648] frecon[307]: Frecon using drm driver i915, version 1.6, date(20170907), desc(Intel Graphics) using atomic
[ 2.576571] frecon[307]: could not find atomic property CTM
[ 2.576586] frecon[307]: could not find atomic property DEGAMMA_LUT
[ 2.576597] frecon[307]: could not find atomic property GAMMA_LUT
[ 2.659456] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
[ 2.786071] EXT4-fs (dm-1): recovery complete
[ 2.787404] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard,commit=600
[ 2.975684] audit: type=1400 audit(1640556955.974:5): avc: granted { execute } for pid=352 comm="chromeos_startu" name="crash_reporter" dev="dm-0" ino=49373 scontext=u:r:chromeos_startup:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file
[ 3.225297] sd 0:0:0:0: [sda] 125042688 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 3.225729] sd 0:0:0:0: [sda] Write Protect is off
[ 3.225733] sd 0:0:0:0: [sda] Mode Sense: 87 00 00 00
[ 3.227627] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.241539] sda: sda1 sda2
[ 3.242965] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.317389] EXT4-fs (mmcblk0p1): re-mounted. Opts: discard,resgid=20119,commit=600,data=ordered
[ 3.395805] low_mem: threshold[0] 407 MB
[ 3.395811] low_mem: threshold[1] 3132 MB
[ 3.464835] zram: Added device: zram0
[ 3.473986] Intel(R) Wireless WiFi driver for Linux
[ 3.479015] iwlwifi debug config: FW_DBG_PRESET=1 => FW_DBG_DOMAIN=0x20000
[ 3.489636] zram0: detected capacity change from 0 to 12029431808
[ 3.498217] iwlwifi 0000:00:0c.0: WRT: Overriding region id 0
[ 3.498224] iwlwifi 0000:00:0c.0: WRT: Overriding region id 1
[ 3.498227] iwlwifi 0000:00:0c.0: WRT: Overriding region id 2
[ 3.498229] iwlwifi 0000:00:0c.0: WRT: Overriding region id 3
[ 3.498232] iwlwifi 0000:00:0c.0: WRT: Overriding region id 4
[ 3.498234] iwlwifi 0000:00:0c.0: WRT: Overriding region id 6
[ 3.498236] iwlwifi 0000:00:0c.0: WRT: Overriding region id 8
[ 3.498238] iwlwifi 0000:00:0c.0: WRT: Overriding region id 9
[ 3.498240] iwlwifi 0000:00:0c.0: WRT: Overriding region id 10
[ 3.498242] iwlwifi 0000:00:0c.0: WRT: Overriding region id 11
[ 3.498244] iwlwifi 0000:00:0c.0: WRT: Overriding region id 15
[ 3.498246] iwlwifi 0000:00:0c.0: WRT: Overriding region id 16
[ 3.498249] iwlwifi 0000:00:0c.0: WRT: Overriding region id 18
[ 3.498251] iwlwifi 0000:00:0c.0: WRT: Overriding region id 19
[ 3.498253] iwlwifi 0000:00:0c.0: WRT: Overriding region id 20
[ 3.498255] iwlwifi 0000:00:0c.0: WRT: Overriding region id 21
[ 3.498257] iwlwifi 0000:00:0c.0: WRT: Overriding region id 28
[ 3.498261] iwlwifi 0000:00:0c.0: WRT: Overriding region id 29
[ 3.498744] iwlwifi 0000:00:0c.0: loaded firmware version 46.c794e81b.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
[ 3.502718] Adding 11747488k swap on /dev/zram0. Priority:-2 extents:1 across:11747488k SS
[ 3.526257] iwlwifi 0000:00:0c.0: Detected Intel(R) Wireless-AC 9560 160MHz, REV=0x318
[ 3.526348] thermal thermal_zone6: failed to read out thermal zone (-61)
[ 3.532635] iwlwifi 0000:00:0c.0: WRT: Failed to allocate fragment size 8388608
[ 3.580657] iwlwifi 0000:00:0c.0: base HW address: c8:b2:9b:f7:51:07
[ 3.648272] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.893041] udevd[704]: Process '/sbin/restorecon ' failed with exit code 255.
[ 4.183471] cros-ec-dev cros-ec-dev.0.auto: cros_ec_pd_get_polarity: port:0 enabled:1, role:0, polarity:0, state:5
[ 4.185316] cros-ec-dev cros-ec-dev.0.auto: cros_ec_pd_get_polarity: port:1 enabled:1, role:0, polarity:0, state:38
[ 4.242900] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3510-001, fw id: 2998990
[ 4.315618] input: Synaptics TM3510-001 as /devices/pci0000:00/0000:00:17.2/i2c_designware.4/i2c-10/i2c-PNP0C50:00/0018:06CB:CDB6.0002/input/input8
[ 4.316319] hid-rmi 0018:06CB:CDB6.0002: input,hidraw1: I2C HID v1.00 Mouse [PNP0C50:00 06CB:CDB6] on i2c-PNP0C50:00
[ 5.169034] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.829993] init: failsafe-delay main process (696) killed by TERM signal
[ 5.837729] fuse init (API version 7.26)
[ 6.088746] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 6.221564] udevd[2373]: Process '/sbin/restorecon ' failed with exit code 255.
[ 6.313687] sof-audio-pci 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if 0x040100
[ 6.313933] sof-audio-pci 0000:00:0e.0: use msi interrupt mode
[ 6.323433] sof-audio-pci 0000:00:0e.0: Linked as a consumer to 0000:00:02.0
[ 6.323451] sof-audio-pci 0000:00:0e.0: bound 0000:00:02.0 (ops 0xffffffff99ca0e40)
[ 6.331297] sof-audio-pci 0000:00:0e.0: hda codecs found, mask 4
[ 6.365816] udevd[2395]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1c.0/power/wakeup} for writing: Permission denied
[ 6.384434] sof-audio-pci 0000:00:0e.0: Firmware info: version 1:1:0-42e25
[ 6.384443] sof-audio-pci 0000:00:0e.0: Firmware: ABI 3:8:0 Kernel ABI 3:4:0
[ 6.384447] sof-audio-pci 0000:00:0e.0: warn: FW ABI is more recent than kernel
[ 6.384451] sof-audio-pci 0000:00:0e.0: Firmware debug build 1 on Jun 24 2021-23:30:04 - options:
GDB: disabled
lock debug: disabled
lock vdebug: disabled
[ 6.384676] sof-audio-pci 0000:00:0e.0: firmware boot complete
[ 6.572628] udevd[2376]: Process '/bin/chown -R root:wilco_dtc /sys/firmware/dmi/tables' failed with exit code 1.
[ 6.595596] HDMI HDA Codec ehdaudio0D2: Max dais supported: 3
[ 6.597848] bxt_da7219_max98357a glk_da7219_max98357a: info: override FE DAI link SSP1-Codec
[ 6.597856] bxt_da7219_max98357a glk_da7219_max98357a: info: override FE DAI link SSP2-Codec
[ 6.597859] bxt_da7219_max98357a glk_da7219_max98357a: info: override FE DAI link dmic01
[ 6.597862] bxt_da7219_max98357a glk_da7219_max98357a: info: override FE DAI link iDisp1
[ 6.597865] bxt_da7219_max98357a glk_da7219_max98357a: info: override FE DAI link iDisp2
[ 6.597867] bxt_da7219_max98357a glk_da7219_max98357a: info: override FE DAI link iDisp3
[ 6.604856] sof-audio-pci 0000:00:0e.0: Topology: ABI 3:7:0 Kernel ABI 3:4:0
[ 6.604864] sof-audio-pci 0000:00:0e.0: warn: topology ABI is more recent than kernel
[ 6.604874] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name ssp1 Tx not handled
[ 6.606727] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name ssp2 Rx not handled
[ 6.608118] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name ssp2 Tx not handled
[ 6.608786] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name DMIC01 Rx not handled
[ 6.611084] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name DMic not handled
[ 6.611789] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name dmic01_hifi not handled
[ 6.613343] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name hif5-0 Output not handled
[ 6.615239] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name hif6-0 Output not handled
[ 6.615249] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name hif7-0 Output not handled
[ 6.615254] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name iDisp3_out not handled
[ 6.615259] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name iDisp2_out not handled
[ 6.615262] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name iDisp1_out not handled
[ 6.615266] sof-audio-pci 0000:00:0e.0: warning: widget type 1 name codec0_out not handled
[ 6.615270] sof-audio-pci 0000:00:0e.0: warning: widget type 1 name codec1_out not handled
[ 6.615274] sof-audio-pci 0000:00:0e.0: warning: widget type 0 name codec0_in not handled
[ 6.615277] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name iDisp3 Tx not handled
[ 6.615281] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name iDisp2 Tx not handled
[ 6.615290] sof-audio-pci 0000:00:0e.0: warning: widget type 7 name iDisp1 Tx not handled
[ 6.619888] sof-audio-pci 0000:00:0e.0: ASoC: Parent card not yet available, widget card binding deferred
[ 6.620645] max98357a MX98357A:00: GPIO lookup for consumer sdmode
[ 6.620648] max98357a MX98357A:00: using ACPI for GPIO lookup
[ 6.620651] acpi MX98357A:00: GPIO: looking up sdmode-gpios
[ 6.620654] acpi MX98357A:00: GPIO: looking up sdmode-gpio
[ 6.620659] acpi MX98357A:00: GPIO: _DSD returned MX98357A:00 0 0 0
[ 6.620807] da7219 i2c-DLGS7219:00: Invalid VDDIO voltage
[ 6.621355] da7219 i2c-DLGS7219:00: Using default DAI clk names: da7219-dai-wclk, da7219-dai-bclk
[ 6.627791] dmic-codec dmic-codec: GPIO lookup for consumer dmicen
[ 6.627795] dmic-codec dmic-codec: using lookup tables for GPIO lookup
[ 6.627797] dmic-codec dmic-codec: lookup for GPIO dmicen failed
[ 6.628631] HDMI HDA Codec ehdaudio0D2: ASoC: sink widget hif5-0 Output overwritten
[ 6.630064] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 5:0
[ 6.630159] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 6:0
[ 6.630239] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 7:0
[ 6.630449] bxt_da7219_max98357a glk_da7219_max98357a: HiFi <-> SSP1 Pin mapping ok
[ 6.630603] bxt_da7219_max98357a glk_da7219_max98357a: da7219-hifi <-> SSP2 Pin mapping ok
[ 6.630621] bxt_da7219_max98357a glk_da7219_max98357a: dmic-hifi <-> DMIC01 Pin mapping ok
[ 6.630641] bxt_da7219_max98357a glk_da7219_max98357a: intel-hdmi-hifi1 <-> iDisp1 Pin mapping ok
[ 6.630657] bxt_da7219_max98357a glk_da7219_max98357a: intel-hdmi-hifi2 <-> iDisp2 Pin mapping ok
[ 6.630674] bxt_da7219_max98357a glk_da7219_max98357a: intel-hdmi-hifi3 <-> iDisp3 Pin mapping ok
[ 6.630781] bxt_da7219_max98357a glk_da7219_max98357a: snd-soc-dummy-dai <-> Speakers 0 mapping ok
[ 6.630857] bxt_da7219_max98357a glk_da7219_max98357a: snd-soc-dummy-dai <-> Headset 1 mapping ok
[ 6.630909] bxt_da7219_max98357a glk_da7219_max98357a: snd-soc-dummy-dai <-> DMIC01 99 mapping ok
[ 6.630960] bxt_da7219_max98357a glk_da7219_max98357a: snd-soc-dummy-dai <-> HDMI1 5 mapping ok
[ 6.631022] bxt_da7219_max98357a glk_da7219_max98357a: snd-soc-dummy-dai <-> HDMI2 6 mapping ok
[ 6.631074] bxt_da7219_max98357a glk_da7219_max98357a: snd-soc-dummy-dai <-> HDMI3 7 mapping ok
[ 6.631176] bxt_da7219_max98357a glk_da7219_max98357a: ASoC: sink widget DMic overwritten
[ 6.631182] bxt_da7219_max98357a glk_da7219_max98357a: ASoC: source widget hif5-0 Output overwritten
[ 6.631187] bxt_da7219_max98357a glk_da7219_max98357a: ASoC: source widget hif6-0 Output overwritten
[ 6.631193] bxt_da7219_max98357a glk_da7219_max98357a: ASoC: source widget hif7-0 Output overwritten
[ 6.631245] bxt_da7219_max98357a glk_da7219_max98357a: ASoC: source widget Capture overwritten
[ 6.631283] bxt_da7219_max98357a glk_da7219_max98357a: ASoC: source widget hif5-0 Output overwritten
[ 6.632522] input: sof-glkda7219max Headset Jack as /devices/pci0000:00/0000:00:0e.0/glk_da7219_max98357a/sound/card0/input9
[ 6.632724] input: sof-glkda7219max HDMI/DP, pcm=5 Jack as /devices/pci0000:00/0000:00:0e.0/glk_da7219_max98357a/sound/card0/input10
[ 6.632866] input: sof-glkda7219max HDMI/DP, pcm=6 Jack as /devices/pci0000:00/0000:00:0e.0/glk_da7219_max98357a/sound/card0/input11
[ 6.633159] input: sof-glkda7219max HDMI/DP, pcm=7 Jack as /devices/pci0000:00/0000:00:0e.0/glk_da7219_max98357a/sound/card0/input12
[ 6.886773] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b567)
[ 6.901279] uvcvideo: Found UVC 1.00 device 8MP World Facing (0bda:5647)
[ 6.933803] usbcore: registered new interface driver uvcvideo
[ 6.933811] USB Video Class driver (1.1.1)
[ 6.940407] sof-audio-pci 0000:00:0e.0: firmware boot complete
[ 7.024088] Bluetooth: bt_init() Core ver 2.22
[ 7.025625] NET: Registered protocol family 31
[ 7.025633] Bluetooth: bt_init() HCI device and connection manager initialized
[ 7.025642] Bluetooth: hci_sock_init() HCI socket layer initialized
[ 7.025647] Bluetooth: l2cap_init_sockets() L2CAP socket layer initialized
[ 7.025688] Bluetooth: sco_init() SCO socket layer initialized
[ 7.035355] usb 1-9: GPIO lookup for consumer reset
[ 7.035359] usb 1-9: using ACPI for GPIO lookup
[ 7.035363] acpi device:1d: GPIO: looking up reset-gpios
[ 7.035365] acpi device:1d: GPIO: looking up reset-gpio
[ 7.035369] acpi device:1d: GPIO: _DSD returned device:1d 0 0 1
[ 7.035724] usbcore: registered new interface driver btusb
[ 7.037227] Bluetooth: btintel_version_info() hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 7.038446] Bluetooth: btintel_read_boot_params() hci0: Device revision is 2
[ 7.038452] Bluetooth: btintel_read_boot_params() hci0: Secure boot is enabled
[ 7.038455] Bluetooth: btintel_read_boot_params() hci0: OTP lock is enabled
[ 7.038458] Bluetooth: btintel_read_boot_params() hci0: API lock is enabled
[ 7.038460] Bluetooth: btintel_read_boot_params() hci0: Debug lock is disabled
[ 7.038463] Bluetooth: btintel_read_boot_params() hci0: Minimum firmware build 1 week 10 2014
[ 7.045578] Bluetooth: btusb_setup_intel_new() hci0: Found device firmware: intel/ibt-17-16-1.sfi
[ 7.354866] init: send-powerwash-metrics main process (2704) terminated with status 1
[ 7.843776] IPv6: ADDRCONF(NETDEV_UP): veth0: link is not ready
[ 7.852653] IPv6: ADDRCONF(NETDEV_UP): arc_ns0: link is not ready
[ 7.852671] IPv6: ADDRCONF(NETDEV_CHANGE): arc_ns0: link becomes ready
[ 7.852733] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[ 8.006821] init: ml-service (mojo_service) post-start process (3378) terminated with status 2
[ 8.037472] IPv6: ADDRCONF(NETDEV_UP): veth1: link is not ready
[ 8.041784] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[ 8.282856] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
[ 8.456840] Bluetooth: btusb_setup_intel_new() hci0: Waiting for firmware download to complete
[ 8.457416] Bluetooth: hci_vendor_evt() Manufacturer ID 0x0002:
[ 8.457419] Bluetooth: btusb_setup_intel_new() hci0: Firmware loaded in 1388416 usecs
[ 8.457427] Bluetooth: hci_vendor_evt() Unknown Evt ID: 00 data: 00 00 00
[ 8.457500] Bluetooth: btusb_setup_intel_new() hci0: Waiting for device to boot
[ 8.471429] Bluetooth: hci_vendor_evt() Manufacturer ID 0x0002:
[ 8.471436] Bluetooth: btusb_setup_intel_new() hci0: Device booted in 13632 usecs
[ 8.471441] Bluetooth: hci_vendor_evt() Unknown Evt ID: 00 data: 02 01 02 FF 01
[ 8.471825] Bluetooth: btintel_load_ddc_config() hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[ 8.473455] Bluetooth: btintel_load_ddc_config() hci0: Applying Intel DDC parameters completed
[ 8.474429] Bluetooth: btintel_version_info() hci0: Firmware revision 0.1 build 166 week 30 2021
[ 8.489563] wlan0: authenticate with 38:2c:4a:e5:46:60
[ 8.489693] wlan0: bad/missing VHT capabilities, disabling VHT
[ 8.489696] wlan0: 80 MHz not supported, disabling VHT
[ 8.493032] wlan0: send auth to 38:2c:4a:e5:46:60 (try 1/3)
[ 8.528423] Bluetooth: msft_le_set_advertisement_filter_enable_cb() hci0: MSFT filter_enable is already on
[ 8.532052] wlan0: authenticated
[ 8.533416] wlan0: associate with 38:2c:4a:e5:46:60 (try 1/3)
[ 8.537560] wlan0: RX AssocResp from 38:2c:4a:e5:46:60 (capab=0x1411 status=0 aid=6)
[ 8.545728] wlan0: associated
[ 8.561965] NET: Registered protocol family 38
[ 8.573478] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
[ 8.736461] Bluetooth: rfcomm_init_sockets() RFCOMM socket layer initialized
[ 8.736505] Bluetooth: rfcomm_init() RFCOMM ver 1.11
[ 9.697415] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 10.671704] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
[ 10.688049] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
[ 13.208843] Bluetooth: set_quality_report_func() quality report enable 0 changed 0
[ 13.881255] NET: Registered protocol family 40
[ 14.014557] new mount options do not match the existing superblock, will be ignored
[ 14.258556] binder: 3854:3854 ioctl 4018620d 7ffce4aa4ba0 returned -22
[ 14.421329] Chromium OS LSM: nosymfollow option should be changed to MS_NOSYMFOLLOW flag.
[ 14.438649] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
[ 14.610453] EXT4-fs (mmcblk0p1): re-mounted. Opts:
[ 16.709275] sof-audio-pci 0000:00:0e.0: firmware boot complete
[ 17.065338] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
[ 17.471136] tun: Universal TUN/TAP device driver, 1.6
[ 17.522268] IPv6: ADDRCONF(NETDEV_UP): arc0: link is not ready
[ 17.534600] IPv6: ADDRCONF(NETDEV_UP): vetharc0: link is not ready
[ 17.534625] IPv6: ADDRCONF(NETDEV_CHANGE): vetharc0: link becomes ready
[ 17.534699] IPv6: ADDRCONF(NETDEV_CHANGE): arc0: link becomes ready
[ 17.582281] arcbr0: port 1(vetharc0) entered blocking state
[ 17.582288] arcbr0: port 1(vetharc0) entered disabled state
[ 17.582381] device vetharc0 entered promiscuous mode
[ 17.582438] arcbr0: port 1(vetharc0) entered blocking state
[ 17.582442] arcbr0: port 1(vetharc0) entered forwarding state
[ 17.732697] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.743048] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.743680] arc_wlan0: port 1(vethwlan0) entered blocking state
[ 17.743687] arc_wlan0: port 1(vethwlan0) entered disabled state
[ 17.743776] device vethwlan0 entered promiscuous mode
[ 17.743829] arc_wlan0: port 1(vethwlan0) entered blocking state
[ 17.743832] arc_wlan0: port 1(vethwlan0) entered forwarding state
[ 17.987434] IPv6: ADDRCONF(NETDEV_UP): veth2: link is not ready
[ 17.999139] IPv6: ADDRCONF(NETDEV_CHANGE): veth2: link becomes ready
[ 18.029296] ESDFS-fs (esdfs): mounted on top of /opt/google/containers/android/rootfs/android-data/data/media type ext4
[ 18.029717] ESDFS-fs (esdfs): mounted on top of /opt/google/containers/android/rootfs/android-data/data/media type ext4
[ 18.029997] ESDFS-fs (esdfs): mounted on top of /opt/google/containers/android/rootfs/android-data/data/media type ext4
[ 18.428031] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
[ 32.001810] binder_alloc: 5177: binder_alloc_buf size 1056768 failed, no address space
[ 32.001819] binder_alloc: allocated: 7936 (num: 13 largest: 3392), free: 1032448 (num: 5 largest: 1031392)
[ 32.001825] binder: 5191:5623 transaction failed 29201/-28, size 1056768-0 line 2912
from breath.
Sorry, I meant a dmesg
from Breath on the chromebook.
from breath.
`dmesg` output
[ 0.000000] Linux version 5.10.88 (milkydeveloper@GF63) (gcc (Ubuntu 11.2.0-13ubuntu1) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.37) #6 SMP PREEMPT Sun Dec 26 14:02:47 CST 2021
[ 0.000000] Command line: cros_secure console=tty1 root=/dev/sda2 i915.modeset=1 rootwait rw fbcon=logo-pos:center,logo-count:1 loglevel=0 splash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x00000000799f2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000799f3000-0x0000000079ffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe043fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed17fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Google Bobba/Bobba, BIOS Google_Bobba.11297.252.0 01/25/2021
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Initial usec timer 4978540
[ 0.000000] tsc: Detected 1094.400 MHz processor
[ 0.000014] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000017] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000023] last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.000027] MTRR default type: uncachable
[ 0.000028] MTRR fixed ranges enabled:
[ 0.000029] 00000-9FFFF write-back
[ 0.000030] A0000-BFFFF uncachable
[ 0.000032] C0000-FFFFF write-back
[ 0.000033] MTRR variable ranges enabled:
[ 0.000034] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000036] 1 base 007B000000 mask 7FFF000000 uncachable
[ 0.000037] 2 base 007C000000 mask 7FFC000000 uncachable
[ 0.000038] 3 base 00B0000000 mask 7FF0000000 write-combining
[ 0.000039] 4 base 0100000000 mask 7F00000000 write-back
[ 0.000040] 5 base 0200000000 mask 7F80000000 write-back
[ 0.000041] 6 disabled
[ 0.000041] 7 disabled
[ 0.000042] 8 disabled
[ 0.000043] 9 disabled
[ 0.000141] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000251] last_pfn = 0x799f3 max_arch_pfn = 0x400000000
[ 0.003917] Using GB pages for direct mapping
[ 0.004317] ACPI: Early table checksum verification disabled
[ 0.004321] ACPI: RSDP 0x00000000000F0000 000024 (v02 COREv4)
[ 0.004325] ACPI: XSDT 0x0000000079B040E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.004332] ACPI: FACP 0x0000000079B07340 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.004338] ACPI: DSDT 0x0000000079B04280 0030B2 (v02 COREv4 COREBOOT 20110725 INTL 20180531)
[ 0.004343] ACPI: FACS 0x0000000079B04240 000040
[ 0.004346] ACPI: FACS 0x0000000079B04240 000040
[ 0.004349] ACPI: SSDT 0x0000000079B07440 002134 (v02 COREv4 COREBOOT 0000002A CORE 0000002A)
[ 0.004353] ACPI: MCFG 0x0000000079B09580 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.004356] ACPI: TPM2 0x0000000079B095C0 00004C (v04 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.004359] ACPI: APIC 0x0000000079B09610 00006C (v02 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.004363] ACPI: NHLT 0x0000000079B09680 001A8F (v05 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.004367] ACPI: HPET 0x0000000079B0D110 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.004370] ACPI: Reserving FACP table memory at [mem 0x79b07340-0x79b07433]
[ 0.004372] ACPI: Reserving DSDT table memory at [mem 0x79b04280-0x79b07331]
[ 0.004373] ACPI: Reserving FACS table memory at [mem 0x79b04240-0x79b0427f]
[ 0.004374] ACPI: Reserving FACS table memory at [mem 0x79b04240-0x79b0427f]
[ 0.004375] ACPI: Reserving SSDT table memory at [mem 0x79b07440-0x79b09573]
[ 0.004376] ACPI: Reserving MCFG table memory at [mem 0x79b09580-0x79b095bb]
[ 0.004377] ACPI: Reserving TPM2 table memory at [mem 0x79b095c0-0x79b0960b]
[ 0.004378] ACPI: Reserving APIC table memory at [mem 0x79b09610-0x79b0967b]
[ 0.004379] ACPI: Reserving NHLT table memory at [mem 0x79b09680-0x79b0b10e]
[ 0.004380] ACPI: Reserving HPET table memory at [mem 0x79b0d110-0x79b0d147]
[ 0.004393] ACPI: Local APIC address 0xfee00000
[ 0.004494] No NUMA configuration found
[ 0.004496] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.004505] NODE_DATA(0) allocated [mem 0x27ffee000-0x27fffffff]
[ 0.004538] Zone ranges:
[ 0.004540] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.004542] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.004544] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.004546] Movable zone start for each node
[ 0.004548] Early memory node ranges
[ 0.004549] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.004550] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.004551] node 0: [mem 0x0000000012151000-0x00000000799f2fff]
[ 0.004552] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.004555] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[ 0.004557] On node 0 totalpages: 2062401
[ 0.004559] DMA zone: 64 pages used for memmap
[ 0.004560] DMA zone: 22 pages reserved
[ 0.004561] DMA zone: 3999 pages, LIFO batch:0
[ 0.004562] DMA32 zone: 7587 pages used for memmap
[ 0.004563] DMA32 zone: 485538 pages, LIFO batch:63
[ 0.004564] Normal zone: 24576 pages used for memmap
[ 0.004565] Normal zone: 1572864 pages, LIFO batch:63
[ 0.004569] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.004600] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.008631] On node 0, zone DMA32: 8529 pages in unavailable ranges
[ 0.021819] On node 0, zone Normal: 26125 pages in unavailable ranges
[ 0.021845] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.022001] ACPI: PM-Timer IO Port: 0x408
[ 0.022003] ACPI: Local APIC address 0xfee00000
[ 0.022042] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.022045] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.022047] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.022049] ACPI: IRQ0 used by override.
[ 0.022050] ACPI: IRQ9 used by override.
[ 0.022052] Using ACPI (MADT) for SMP configuration information
[ 0.022054] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.022061] TSC deadline timer available
[ 0.022063] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.022084] [mem 0x80000000-0xcfffffff] available for PCI devices
[ 0.022089] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.028579] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.028913] percpu: Embedded 57 pages/cpu s195304 r8192 d29976 u524288
[ 0.028920] pcpu-alloc: s195304 r8192 d29976 u524288 alloc=1*2097152
[ 0.028923] pcpu-alloc: [0] 0 1 2 3
[ 0.028952] Built 1 zonelists, mobility grouping on. Total pages: 2030152
[ 0.028954] Policy zone: Normal
[ 0.028957] Kernel command line: cros_secure console=tty1 root=/dev/sda2 i915.modeset=1 rootwait rw fbcon=logo-pos:center,logo-count:1 loglevel=0 splash
[ 0.030034] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.030551] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.030595] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.073702] Memory: 8001668K/8249604K available (16399K kernel code, 2813K rwdata, 5600K rodata, 1932K init, 2192K bss, 247680K reserved, 0K cma-reserved)
[ 0.073762] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.073779] ftrace: allocating 50518 entries in 198 pages
[ 0.092554] ftrace: allocated 198 pages with 4 groups
[ 0.092663] rcu: Preemptible hierarchical RCU implementation.
[ 0.092665] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.092666] Trampoline variant of Tasks RCU enabled.
[ 0.092666] Rude variant of Tasks RCU enabled.
[ 0.092667] Tracing variant of Tasks RCU enabled.
[ 0.092669] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.092670] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.097936] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[ 0.098423] random: get_random_bytes called from start_kernel+0x368/0x538 with crng_init=0
[ 0.098454] Console: colour dummy device 80x25
[ 0.098466] printk: console [tty1] enabled
[ 0.098484] ACPI: Core revision 20200925
[ 0.098666] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.098710] APIC: Switch to symmetric I/O mode setup
[ 0.103169] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.107716] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.107723] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=1094400)
[ 0.107726] pid_max: default: 32768 minimum: 301
[ 0.107747] LSM: Security Framework initializing
[ 0.107757] Yama: becoming mindful.
[ 0.107762] SELinux: Initializing.
[ 0.107801] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.107819] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.108112] CPU0: Thermal monitoring enabled (TM1)
[ 0.108114] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.108213] process: using mwait in idle threads
[ 0.108215] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.108216] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.108221] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.108222] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.108223] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.108225] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.108227] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.108406] Freeing SMP alternatives memory: 40K
[ 0.109775] smpboot: CPU0: Intel(R) Pentium(R) Silver N5030 CPU @ 1.10GHz (family: 0x6, model: 0x7a, stepping: 0x8)
[ 0.109971] Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.109985] ... version: 4
[ 0.109985] ... bit width: 48
[ 0.109986] ... generic registers: 4
[ 0.109987] ... value mask: 0000ffffffffffff
[ 0.109988] ... max period: 00007fffffffffff
[ 0.109989] ... fixed-purpose events: 3
[ 0.109989] ... event mask: 000000070000000f
[ 0.110096] rcu: Hierarchical SRCU implementation.
[ 0.110729] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.110803] smp: Bringing up secondary CPUs ...
[ 0.110929] x86: Booting SMP configuration:
[ 0.110931] .... node #0, CPUs: #1 #2 #3
[ 0.113576] smp: Brought up 1 node, 4 CPUs
[ 0.113724] smpboot: Max logical packages: 1
[ 0.113725] smpboot: Total of 4 processors activated (8755.20 BogoMIPS)
[ 0.114364] devtmpfs: initialized
[ 0.114364] x86/mm: Memory block size: 128MB
[ 0.115417] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.115417] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.115417] pinctrl core: initialized pinctrl subsystem
[ 0.115724] PM: RTC time: 22:25:54, date: 2021-12-26
[ 0.115831] NET: Registered protocol family 16
[ 0.115943] audit: initializing netlink subsys (disabled)
[ 0.115952] audit: type=2000 audit(1640557554.013:1): state=initialized audit_enabled=0 res=1
[ 0.115952] thermal_sys: Registered thermal governor 'step_wise'
[ 0.115952] thermal_sys: Registered thermal governor 'user_space'
[ 0.115952] cpuidle: using governor ladder
[ 0.115952] cpuidle: using governor menu
[ 0.115952] ACPI: bus type PCI registered
[ 0.115952] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.115952] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.115952] PCI: Using configuration type 1 for base access
[ 0.119247] Kprobes globally optimized
[ 0.119743] cryptd: max_cpu_qlen set to 1000
[ 0.120803] ACPI: Added _OSI(Module Device)
[ 0.120804] ACPI: Added _OSI(Processor Device)
[ 0.120805] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.120807] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.120808] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.120809] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.120811] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.122147] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.123338] ACPI: EC: EC started
[ 0.123339] ACPI: EC: interrupt blocked
[ 0.123462] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.123465] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.123466] ACPI: Interpreter enabled
[ 0.123481] ACPI: (supports S0 S3 S5)
[ 0.123482] ACPI: Using IOAPIC for interrupt routing
[ 0.123495] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.123696] ACPI: Enabled 1 GPEs in block 00 to 7F
[ 0.124409] ACPI: Power Resource [PXP] (on)
[ 0.232823] ACPI: Power Resource [PXP] (on)
[ 0.342189] ACPI: Power Resource [PRIC] (on)
[ 0.365443] ACPI: Power Resource [PRIC] (on)
[ 0.390819] ACPI: Power Resource [PRIC] (on)
[ 0.446816] ACPI: Power Resource [PRIC] (on)
[ 0.530952] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.530960] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.531008] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.531150] PCI host bridge to bus 0000:00
[ 0.531153] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.531155] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
[ 0.531156] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.531158] pci_bus 0000:00: root bus resource [mem 0x7b000000-0x7fffffff window]
[ 0.531159] pci_bus 0000:00: root bus resource [mem 0x80000000-0xe0000000 window]
[ 0.531161] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.531182] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[ 0.531339] pci 0000:00:00.1: [8086:318c] type 00 class 0x118000
[ 0.531361] pci 0000:00:00.1: reg 0x10: [mem 0xc1110000-0xc1117fff 64bit]
[ 0.531548] pci 0000:00:02.0: [8086:3184] type 00 class 0x030000
[ 0.531557] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[ 0.531562] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.531567] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.531744] pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000
[ 0.531768] pci 0000:00:0c.0: reg 0x10: [mem 0xc1118000-0xc111bfff 64bit]
[ 0.531885] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
[ 0.532057] pci 0000:00:0e.0: [8086:3198] type 00 class 0x040100
[ 0.532077] pci 0000:00:0e.0: reg 0x10: [mem 0xc111c000-0xc111ffff 64bit]
[ 0.532101] pci 0000:00:0e.0: reg 0x20: [mem 0xc1000000-0xc10fffff 64bit]
[ 0.532162] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.532301] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[ 0.532317] pci 0000:00:15.0: reg 0x10: [mem 0xc1100000-0xc110ffff 64bit]
[ 0.532379] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.532522] pci 0000:00:16.0: [8086:31ac] type 00 class 0x118000
[ 0.532544] pci 0000:00:16.0: reg 0x10: [mem 0xc1125000-0xc1125fff 64bit]
[ 0.532559] pci 0000:00:16.0: reg 0x18: [mem 0xc1126000-0xc1126fff 64bit]
[ 0.532731] pci 0000:00:16.1: [8086:31ae] type 00 class 0x118000
[ 0.532753] pci 0000:00:16.1: reg 0x10: [mem 0xc1127000-0xc1127fff 64bit]
[ 0.532768] pci 0000:00:16.1: reg 0x18: [mem 0xc1128000-0xc1128fff 64bit]
[ 0.532963] pci 0000:00:17.0: [8086:31b4] type 00 class 0x118000
[ 0.532985] pci 0000:00:17.0: reg 0x10: [mem 0xc1129000-0xc1129fff 64bit]
[ 0.533000] pci 0000:00:17.0: reg 0x18: [mem 0xc112a000-0xc112afff 64bit]
[ 0.533191] pci 0000:00:17.1: [8086:31b6] type 00 class 0x118000
[ 0.533212] pci 0000:00:17.1: reg 0x10: [mem 0xc112b000-0xc112bfff 64bit]
[ 0.533227] pci 0000:00:17.1: reg 0x18: [mem 0xc112c000-0xc112cfff 64bit]
[ 0.533400] pci 0000:00:17.2: [8086:31b8] type 00 class 0x118000
[ 0.533423] pci 0000:00:17.2: reg 0x10: [mem 0xc112d000-0xc112dfff 64bit]
[ 0.533437] pci 0000:00:17.2: reg 0x18: [mem 0xc112e000-0xc112efff 64bit]
[ 0.533607] pci 0000:00:17.3: [8086:31ba] type 00 class 0x118000
[ 0.533628] pci 0000:00:17.3: reg 0x10: [mem 0xc112f000-0xc112ffff 64bit]
[ 0.533643] pci 0000:00:17.3: reg 0x18: [mem 0xc1130000-0xc1130fff 64bit]
[ 0.533828] pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
[ 0.533850] pci 0000:00:18.0: reg 0x10: [mem 0xc1131000-0xc1131fff 64bit]
[ 0.533866] pci 0000:00:18.0: reg 0x18: [mem 0xc1132000-0xc1132fff 64bit]
[ 0.534041] pci 0000:00:18.2: [8086:31c0] type 00 class 0x118000
[ 0.534063] pci 0000:00:18.2: reg 0x10: [mem 0xc1133000-0xc1133fff 64bit]
[ 0.534077] pci 0000:00:18.2: reg 0x18: [mem 0xc1134000-0xc1134fff 64bit]
[ 0.534267] pci 0000:00:19.0: [8086:31c2] type 00 class 0x118000
[ 0.534289] pci 0000:00:19.0: reg 0x10: [mem 0xc1135000-0xc1135fff 64bit]
[ 0.534303] pci 0000:00:19.0: reg 0x18: [mem 0xc1136000-0xc1136fff 64bit]
[ 0.534496] pci 0000:00:19.2: [8086:31c6] type 00 class 0x118000
[ 0.534518] pci 0000:00:19.2: reg 0x10: [mem 0xc1137000-0xc1137fff 64bit]
[ 0.534533] pci 0000:00:19.2: reg 0x18: [mem 0xc1138000-0xc1138fff 64bit]
[ 0.534733] pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501
[ 0.534754] pci 0000:00:1c.0: reg 0x10: [mem 0xc1139000-0xc1139fff 64bit]
[ 0.534768] pci 0000:00:1c.0: reg 0x18: [mem 0xc113a000-0xc113afff 64bit]
[ 0.534963] pci 0000:00:1f.0: [8086:3197] type 00 class 0x060100
[ 0.535153] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[ 0.535207] pci 0000:00:1f.1: reg 0x10: [mem 0xc113b000-0xc113b0ff 64bit]
[ 0.535272] pci 0000:00:1f.1: reg 0x20: [io 0x1040-0x105f]
[ 0.536442] gpiochip_find_base: found new base at 432
[ 0.536900] gpio gpiochip0: (INT3453:00): created GPIO range 0->31 ==> INT3453:00 PIN 0->31
[ 0.536902] gpio gpiochip0: (INT3453:00): created GPIO range 32->63 ==> INT3453:00 PIN 32->63
[ 0.536904] gpio gpiochip0: (INT3453:00): created GPIO range 64->79 ==> INT3453:00 PIN 64->79
[ 0.537754] gpio gpiochip0: (INT3453:00): added GPIO chardev (254:0)
[ 0.537754] gpio gpiochip0: registered GPIOs 432 to 511 on INT3453:00
[ 0.537876] gpiochip_find_base: found new base at 352
[ 0.538321] gpio gpiochip1: (INT3453:01): created GPIO range 0->31 ==> INT3453:01 PIN 0->31
[ 0.538323] gpio gpiochip1: (INT3453:01): created GPIO range 32->63 ==> INT3453:01 PIN 32->63
[ 0.538324] gpio gpiochip1: (INT3453:01): created GPIO range 64->79 ==> INT3453:01 PIN 64->79
[ 0.538353] gpio gpiochip1: (INT3453:01): added GPIO chardev (254:1)
[ 0.538353] gpio gpiochip1: registered GPIOs 352 to 431 on INT3453:01
[ 0.538353] gpiochip_find_base: found new base at 332
[ 0.538353] gpio gpiochip2: (INT3453:02): created GPIO range 0->19 ==> INT3453:02 PIN 0->19
[ 0.538725] gpio gpiochip2: (INT3453:02): added GPIO chardev (254:2)
[ 0.538740] gpio gpiochip2: registered GPIOs 332 to 351 on INT3453:02
[ 0.538861] gpiochip_find_base: found new base at 297
[ 0.539044] gpio gpiochip3: (INT3453:03): created GPIO range 0->31 ==> INT3453:03 PIN 0->31
[ 0.539046] gpio gpiochip3: (INT3453:03): created GPIO range 32->34 ==> INT3453:03 PIN 32->34
[ 0.539073] gpio gpiochip3: (INT3453:03): added GPIO chardev (254:3)
[ 0.539073] gpio gpiochip3: registered GPIOs 297 to 331 on INT3453:03
[ 0.540040] ACPI: EC: interrupt unblocked
[ 0.540041] ACPI: EC: event unblocked
[ 0.540053] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.540054] ACPI: EC: GPE=0x14
[ 0.540056] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 0.540058] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.540742] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.540742] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.540742] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.540742] vgaarb: loaded
[ 0.540819] SCSI subsystem initialized
[ 0.540826] libata version 3.00 loaded.
[ 0.540826] ACPI: bus type USB registered
[ 0.540826] usbcore: registered new interface driver usbfs
[ 0.540826] usbcore: registered new interface driver hub
[ 0.540826] usbcore: registered new device driver usb
[ 0.540830] mc: Linux media interface: v0.10
[ 0.540836] videodev: Linux video capture interface: v2.00
[ 0.540842] pps_core: LinuxPPS API ver. 1 registered
[ 0.540843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.540846] PTP clock support registered
[ 0.540945] chromeos_acpi: registering CHSW 0
[ 0.541082] chromeos_acpi: registering VBNV 0
[ 0.541084] chromeos_acpi: registering VBNV 1
[ 0.541084] chromeos_acpi: truncating buffer from 3072 to 1336
[ 0.541097] chromeos_acpi: installed
[ 0.541120] Advanced Linux Sound Architecture Driver Initialized.
[ 0.541756] PCI: Using ACPI for IRQ routing
[ 0.570188] PCI: pci_cache_line_size set to 64 bytes
[ 0.570298] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.570300] e820: reserve RAM buffer [mem 0x799f3000-0x7bffffff]
[ 0.570780] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.570788] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.572747] clocksource: Switched to clocksource tsc-early
[ 0.596863] VFS: Disk quotas dquot_6.6.0
[ 0.596884] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.596930] pnp: PnP ACPI init
[ 0.597174] system 00:00: [io 0x0900-0x09fe] has been reserved
[ 0.597183] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.597228] system 00:01: [io 0x0200] has been reserved
[ 0.597230] system 00:01: [io 0x0204] has been reserved
[ 0.597231] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.597233] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.597237] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.597274] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.598248] pnp: PnP ACPI: found 3 devices
[ 0.605099] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.605202] NET: Registered protocol family 2
[ 0.605356] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.606651] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[ 0.606681] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.606815] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.607179] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.607227] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 0.607286] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 0.607391] NET: Registered protocol family 1
[ 0.607697] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.607699] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
[ 0.607701] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.607702] pci_bus 0000:00: resource 7 [mem 0x7b000000-0x7fffffff window]
[ 0.607704] pci_bus 0000:00: resource 8 [mem 0x80000000-0xe0000000 window]
[ 0.607788] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.608267] PCI: CLS 64 bytes, default 64
[ 0.608329] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.608331] software IO TLB: mapped [mem 0x00000000759f3000-0x00000000799f3000] (64MB)
[ 0.608428] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 0.608429] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.608430] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.608431] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.608432] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.608773] kvm: already loaded the other module
[ 0.608778] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.608798] clocksource: Switched to clocksource tsc
[ 0.608820] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.609837] Initialise system trusted keyrings
[ 0.609891] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[ 0.611428] zbud: loaded
[ 0.611747] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.611830] Registering esdfs 0.2
[ 0.620176] Key type asymmetric registered
[ 0.620177] Asymmetric key parser 'x509' registered
[ 0.620187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.620188] io scheduler mq-deadline registered
[ 0.620190] io scheduler kyber registered
[ 0.620401] intel_idle: MWAIT substates: 0x11242020
[ 0.620403] intel_idle: v0.5.1 model 0x7A
[ 0.620948] intel_idle: Local APIC timer is reliable in all C-states
[ 0.621037] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input0
[ 0.621816] ACPI: Lid Switch [LID0]
[ 0.621886] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.622793] ACPI: Sleep Button [SLP]
[ 0.622853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.623802] ACPI: Power Button [PWRF]
[ 0.624696] Non-volatile memory driver v1.3
[ 0.625275] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.642794] ACPI: bus type drm_connector registered
[ 0.642919] pci 0000:00:02.0: attach allowed to drvr i915 [internal device]
[ 0.643195] i915 0000:00:02.0: [drm] Unknown revid 0x06
[ 0.643562] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 0.693945] i915 0000:00:02.0: [drm] couldn't get memory information
[ 0.694630] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.711602] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 0.712092] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 1
[ 0.712105] usbcore: registered new interface driver udl
[ 0.713652] fbcon: i915 (fb0) is primary device
[ 0.714373] loop: module loaded
[ 0.714466] lkdtm: No crash points registered, enable through debugfs
[ 0.714541] pci 0000:00:1f.0: attach allowed to drvr lpc_ich [internal device]
[ 0.714628] pci 0000:00:16.0: attach allowed to drvr intel-lpss [internal device]
[ 0.715005] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 0.716679] i2c_designware i2c_designware.0: GPIO lookup for consumer scl
[ 0.716680] i2c_designware i2c_designware.0: using ACPI for GPIO lookup
[ 0.716682] acpi device:0b: GPIO: looking up scl-gpios
[ 0.716684] acpi device:0b: GPIO: looking up scl-gpio
[ 0.716685] i2c_designware i2c_designware.0: using lookup tables for GPIO lookup
[ 0.716687] i2c_designware i2c_designware.0: No GPIO consumer scl found
[ 0.717799] pci 0000:00:16.1: attach allowed to drvr intel-lpss [internal device]
[ 0.718113] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 0.719847] i2c_designware i2c_designware.1: GPIO lookup for consumer scl
[ 0.719849] i2c_designware i2c_designware.1: using ACPI for GPIO lookup
[ 0.719852] acpi device:0c: GPIO: looking up scl-gpios
[ 0.719854] acpi device:0c: GPIO: looking up scl-gpio
[ 0.719855] i2c_designware i2c_designware.1: using lookup tables for GPIO lookup
[ 0.719856] i2c_designware i2c_designware.1: No GPIO consumer scl found
[ 0.721094] pci 0000:00:17.0: attach allowed to drvr intel-lpss [internal device]
[ 0.721519] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 0.723492] i2c_designware i2c_designware.2: GPIO lookup for consumer scl
[ 0.723494] i2c_designware i2c_designware.2: using ACPI for GPIO lookup
[ 0.723498] acpi device:0f: GPIO: looking up scl-gpios
[ 0.723500] acpi device:0f: GPIO: looking up scl-gpio
[ 0.723501] i2c_designware i2c_designware.2: using lookup tables for GPIO lookup
[ 0.723502] i2c_designware i2c_designware.2: No GPIO consumer scl found
[ 0.724868] pci 0000:00:17.1: attach allowed to drvr intel-lpss [internal device]
[ 0.725313] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 0.727199] i2c_designware i2c_designware.3: GPIO lookup for consumer scl
[ 0.727202] i2c_designware i2c_designware.3: using ACPI for GPIO lookup
[ 0.727205] acpi device:10: GPIO: looking up scl-gpios
[ 0.727207] acpi device:10: GPIO: looking up scl-gpio
[ 0.727208] i2c_designware i2c_designware.3: using lookup tables for GPIO lookup
[ 0.727209] i2c_designware i2c_designware.3: No GPIO consumer scl found
[ 0.728639] pci 0000:00:17.2: attach allowed to drvr intel-lpss [internal device]
[ 0.729097] idma64 idma64.4: Found Intel integrated DMA 64-bit
[ 0.731043] i2c_designware i2c_designware.4: GPIO lookup for consumer scl
[ 0.731045] i2c_designware i2c_designware.4: using ACPI for GPIO lookup
[ 0.731048] acpi device:11: GPIO: looking up scl-gpios
[ 0.731050] acpi device:11: GPIO: looking up scl-gpio
[ 0.731051] i2c_designware i2c_designware.4: using lookup tables for GPIO lookup
[ 0.731053] i2c_designware i2c_designware.4: No GPIO consumer scl found
[ 0.731314] i2c i2c-10: failed to add I2C device ELAN0000:00 from ACPI
[ 0.732658] pci 0000:00:17.3: attach allowed to drvr intel-lpss [internal device]
[ 0.733124] idma64 idma64.5: Found Intel integrated DMA 64-bit
[ 0.735134] i2c_designware i2c_designware.5: GPIO lookup for consumer scl
[ 0.735136] i2c_designware i2c_designware.5: using ACPI for GPIO lookup
[ 0.735139] acpi device:12: GPIO: looking up scl-gpios
[ 0.735141] acpi device:12: GPIO: looking up scl-gpio
[ 0.735142] i2c_designware i2c_designware.5: using lookup tables for GPIO lookup
[ 0.735143] i2c_designware i2c_designware.5: No GPIO consumer scl found
[ 0.735367] i2c i2c-11: failed to add I2C device ELAN0001:00 from ACPI
[ 0.735696] i2c i2c-11: failed to add I2C device GTCH7502:00 from ACPI
[ 0.736828] pci 0000:00:18.0: attach allowed to drvr intel-lpss [internal device]
[ 0.737247] idma64 idma64.6: Found Intel integrated DMA 64-bit
[ 0.737362] pci 0000:00:18.2: attach allowed to drvr intel-lpss [internal device]
[ 0.737599] pci 0000:00:19.0: attach allowed to drvr intel-lpss [internal device]
[ 0.738025] idma64 idma64.8: Found Intel integrated DMA 64-bit
[ 0.739638] pci 0000:00:19.2: attach allowed to drvr intel-lpss [internal device]
[ 0.740134] idma64 idma64.9: Found Intel integrated DMA 64-bit
[ 0.743083] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 0.743085] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 0.743086] mdio_bus fixed-0: No GPIO consumer reset found
[ 0.743091] libphy: Fixed MDIO Bus: probed
[ 0.743099] PPP generic driver version 2.4.2
[ 0.743264] PPP MPPE Compression module registered
[ 0.743438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.743440] ehci-pci: EHCI PCI platform driver
[ 0.743449] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.743453] ohci-pci: OHCI PCI platform driver
[ 0.743462] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.743483] pci 0000:00:15.0: attach allowed to drvr xhci_hcd [internal device]
[ 0.743784] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 0.743912] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 0.743973] Console: switching to colour frame buffer device 170x57
[ 0.744994] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.745000] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 0.745217] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 0.745219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745220] usb usb1: Product: xHCI Host Controller
[ 0.745222] usb usb1: Manufacturer: Linux 5.10.88 xhci-hcd
[ 0.745223] usb usb1: SerialNumber: 0000:00:15.0
[ 0.745371] hub 1-0:1.0: USB hub found
[ 0.745385] hub 1-0:1.0: 9 ports detected
[ 0.745710] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 0.745787] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 0.745789] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 0.745830] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 0.745831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745832] usb usb2: Product: xHCI Host Controller
[ 0.745833] usb usb2: Manufacturer: Linux 5.10.88 xhci-hcd
[ 0.745834] usb usb2: SerialNumber: 0000:00:15.0
[ 0.745955] hub 2-0:1.0: USB hub found
[ 0.745968] hub 2-0:1.0: 7 ports detected
[ 0.746240] usbcore: registered new interface driver cdc_acm
[ 0.746241] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.746310] usbcore: registered new interface driver uas
[ 0.746324] usbcore: registered new interface driver usb-storage
[ 0.746334] usbcore: registered new interface driver ums-realtek
[ 0.746351] usbcore: registered new interface driver usbserial_generic
[ 0.746356] usbserial: USB Serial support registered for generic
[ 0.746379] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.746380] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.746913] i8042: Warning: Keylock active
[ 0.747116] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.747415] usbcore: registered new interface driver synaptics_usb
[ 0.747567] raydium_ts i2c-RAYD0001:00: GPIO lookup for consumer reset
[ 0.747569] raydium_ts i2c-RAYD0001:00: using ACPI for GPIO lookup
[ 0.747571] acpi RAYD0001:00: GPIO: looking up reset-gpios
[ 0.747573] acpi RAYD0001:00: GPIO: _DSD returned RAYD0001:00 0 0 0
[ 0.747636] gpio gpiochip1: Persistence not supported for GPIO 29
[ 0.752397] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.764761] i915 0000:00:02.0: [drm] fb0: i915 frame buffer device
[ 0.905342] input: Raydium Touchscreen as /devices/pci0000:00/0000:00:17.3/i2c_designware.5/i2c-11/i2c-RAYD0001:00/input/input4
[ 0.905869] usbcore: registered new interface driver sur40
[ 0.905946] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.906578] rtc_cmos rtc_cmos: registered as rtc0
[ 0.906582] rtc_cmos rtc_cmos: GPIO lookup for consumer wp
[ 0.906583] rtc_cmos rtc_cmos: using lookup tables for GPIO lookup
[ 0.906585] rtc_cmos rtc_cmos: No GPIO consumer wp found
[ 0.906601] rtc_cmos rtc_cmos: alarms up to one month, 114 bytes nvram
[ 0.906624] i2c /dev entries driver
[ 0.907532] pci 0000:00:1f.1: attach allowed to drvr i801_smbus [internal device]
[ 0.907746] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A
[ 0.907747] i801_smbus 0000:00:1f.1: PCI INT A: no GSI
[ 0.907772] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 0.907799] genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 00015a00 (timer)
[ 0.907802] i801_smbus 0000:00:1f.1: Failed to allocate irq 0: -16
[ 0.907803] i801_smbus 0000:00:1f.1: SMBus using polling
[ 0.907877] i2c i2c-12: 4/4 memory slots populated (from DMI)
[ 0.983984] usb 1-7: new high-speed USB device number 2 using xhci_hcd
[ 1.114817] pci 0000:00:00.1: attach allowed to drvr proc_thermal [internal device]
[ 1.115282] proc_thermal 0000:00:00.1: Creating sysfs group for PROC_THERMAL_PCI
[ 1.115422] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.115434] iTCO_vendor_support: vendor-support=0
[ 1.115469] device-mapper: uevent: version 1.0.3
[ 1.115539] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [email protected]
[ 1.115650] intel_pstate: Intel P-state driver initializing
[ 1.116088] sdhci: Secure Digital Host Controller Interface driver
[ 1.116089] sdhci: Copyright(c) Pierre Ossman
[ 1.116100] pci 0000:00:1c.0: attach allowed to drvr sdhci-pci [internal device]
[ 1.116112] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6)
[ 1.116408] mmc0: CQHCI version 5.10
[ 1.116583] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[ 1.117050] Registered efivars operations
[ 1.117054] gsmi version 1.0 loaded
[ 1.117595] EFI Variables Facility v0.08 2004-May-17
[ 1.117637] gsmi: exec 0x02ef: Not supported
[ 1.117638] gsmi: Get Next Variable Name failed
[ 1.117639] efivars: get_next_variable: status=8000000000000001
[ 1.117683] gsmi: exec 0x02ef: Not supported
[ 1.117684] gsmi: Get Next Variable Name failed
[ 1.117684] efivars: get_next_variable: status=8000000000000001
[ 1.117687] pstore: Registered efi as persistent store backend
[ 1.117701] hid: raw HID events driver (C) Jiri Kosina
[ 1.117819] usbcore: registered new interface driver usbhid
[ 1.117820] usbhid: USB HID core driver
[ 1.117891] chromeos ramoops using acpi device.
[ 1.118007] pstore: ignoring unexpected backend 'ramoops'
[ 1.118008] ramoops: registering with pstore failed
[ 1.118018] ramoops: probe of ramoops.0 failed with error -1
[ 1.118075] input: Tablet Mode Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/PNP0C09:00/GOOG0006:00/input/input5
[ 1.120285] usb 1-7: New USB device found, idVendor=04f2, idProduct=b567, bcdDevice=32.69
[ 1.120287] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.120289] usb 1-7: Product: HD WebCam
[ 1.120290] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.126925] cros_ec_lpcs GOOG0004:00: Chrome EC device registered
[ 1.135024] cros-usbpd-notify-acpi GOOG0003:00: Couldn't get Chrome EC device pointer.
[ 1.135108] intel_rapl_common: Found RAPL domain package
[ 1.135111] intel_rapl_common: Found RAPL domain core
[ 1.135114] intel_rapl_common: Found RAPL domain uncore
[ 1.135116] intel_rapl_common: Found RAPL domain dram
[ 1.136627] GACT probability NOT on
[ 1.137937] Initializing XFRM netlink socket
[ 1.138039] NET: Registered protocol family 10
[ 1.138328] Segment Routing with IPv6
[ 1.138427] NET: Registered protocol family 17
[ 1.138432] NET: Registered protocol family 15
[ 1.138457] NET: Registered protocol family 36
[ 1.138810] microcode: sig=0x706a8, pf=0x1, revision=0x16
[ 1.138924] microcode: Microcode Update Driver: v2.2.
[ 1.138930] IPI shorthand broadcast: enabled
[ 1.138938] SSE version of gcm_enc/dec engaged.
[ 1.139605] sched_clock: Marking stable (1135166479, 4431333)->(1142522557, -2924745)
[ 1.139706] registered taskstats version 1
[ 1.139709] Loading compiled-in X.509 certificates
[ 1.139736] zswap: loaded using pool lzo/zbud
[ 1.139822] Key type ._fscrypt registered
[ 1.139823] Key type .fscrypt registered
[ 1.139824] Key type fscrypt-provisioning registered
[ 1.139901] pstore: Using crash dump compression: deflate
[ 1.140233] Key type encrypted registered
[ 1.140991] PM: Magic number: 1:701:452
[ 1.154252] gpio gpiochip1: Persistence not supported for GPIO 69
[ 1.154401] input: PRP0001:01 as /devices/pci0000:00/0000:00:16.0/PRP0001:01/input/input6
[ 1.154675] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.155641] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.155699] ALSA device list:
[ 1.155701] No soundcards found.
[ 1.155760] Waiting for root device /dev/sda2...
[ 1.155820] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.155822] cfg80211: failed to load regulatory.db
[ 1.227531] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.285170] random: fast init done
[ 1.290462] mmc0: Command Queue Engine enabled
[ 1.290473] mmc0: new HS400 MMC card at address 0001
[ 1.290751] mmcblk0: mmc0:0001 DA4064 58.2 GiB
[ 1.290804] mmcblk0boot0: mmc0:0001 DA4064 partition 1 4.00 MiB
[ 1.290854] mmcblk0boot1: mmc0:0001 DA4064 partition 2 4.00 MiB
[ 1.290950] mmcblk0rpmb: mmc0:0001 DA4064 partition 3 16.0 MiB, chardev (242:0)
[ 1.294657] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
[ 1.354647] usb 2-3: New USB device found, idVendor=0bda, idProduct=5647, bcdDevice= 0.15
[ 1.354651] usb 2-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.354652] usb 2-3: Product: 8MP World Facing
[ 1.354654] usb 2-3: Manufacturer: Generic
[ 1.354655] usb 2-3: SerialNumber: 200901010001
[ 1.357853] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 1.485521] usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[ 1.485528] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.598163] usb 2-6: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 1.614911] usb 2-6: New USB device found, idVendor=05e3, idProduct=0747, bcdDevice= 8.19
[ 1.614915] usb 2-6: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 1.614916] usb 2-6: Product: USB Storage
[ 1.614918] usb 2-6: Manufacturer: Generic
[ 1.614919] usb 2-6: SerialNumber: 000000000819
[ 1.623884] usb-storage 2-6:1.0: USB Mass Storage device detected
[ 1.624331] scsi host0: usb-storage 2-6:1.0
[ 2.633444] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
[ 3.213798] sd 0:0:0:0: [sda] 125042688 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 3.214539] sd 0:0:0:0: [sda] Write Protect is off
[ 3.214543] sd 0:0:0:0: [sda] Mode Sense: 87 00 00 00
[ 3.216493] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.235317] sda: sda1 sda2
[ 3.238564] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.250392] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.250405] VFS: Mounted root (ext4 filesystem) on device 8:2.
[ 3.269832] devtmpfs: mounted
[ 3.271031] Freeing unused kernel image (initmem) memory: 1932K
[ 3.271034] Write protecting the kernel read-only data: 24576k
[ 3.271736] Freeing unused kernel image (text/rodata gap) memory: 2032K
[ 3.271933] Freeing unused kernel image (rodata/data gap) memory: 544K
[ 3.271940] Run /sbin/init as init process
[ 3.271941] with arguments:
[ 3.271942] /sbin/init
[ 3.271942] cros_secure
[ 3.271943] splash
[ 3.271944] with environment:
[ 3.271944] HOME=/
[ 3.271945] TERM=linux
[ 3.301065] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 3.568104] systemd[1]: Failed to find module 'autofs4'
[ 3.586720] systemd[1]: systemd 247.3-3ubuntu3.6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.599400] systemd[1]: Detected architecture x86-64.
[ 3.619904] systemd[1]: Set hostname to <ubuntu>.
[ 3.924745] random: lvmconfig: uninitialized urandom read (4 bytes read)
[ 4.218422] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 4.287081] random: crng init done
[ 4.293578] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.294072] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 4.294076] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 4.308357] systemd[1]: Created slice system-modprobe.slice.
[ 4.309191] systemd[1]: Created slice User and Session Slice.
[ 4.309391] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.309612] systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported.
[ 4.309875] systemd[1]: Reached target Slices.
[ 4.309988] systemd[1]: Reached target Swap.
[ 4.310196] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.310476] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4.310668] systemd[1]: Listening on multipathd control socket.
[ 4.310930] systemd[1]: Listening on Syslog Socket.
[ 4.311150] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.311315] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.311672] systemd[1]: Listening on Journal Audit Socket.
[ 4.311908] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.312186] systemd[1]: Listening on Journal Socket.
[ 4.312481] systemd[1]: Listening on Network Service Netlink Socket.
[ 4.312769] systemd[1]: Listening on udev Control Socket.
[ 4.312993] systemd[1]: Listening on udev Kernel Socket.
[ 4.313222] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 4.314508] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.316076] systemd[1]: Mounting Kernel Debug File System...
[ 4.317546] systemd[1]: Mounting Kernel Trace File System...
[ 4.319776] systemd[1]: Starting Journal Service...
[ 4.321704] systemd[1]: Starting Set the console keyboard layout...
[ 4.323623] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 4.325316] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 4.326885] systemd[1]: Starting Load Kernel Module configfs...
[ 4.329784] systemd[1]: Starting Load Kernel Module drm...
[ 4.331253] systemd[1]: Starting Load Kernel Module fuse...
[ 4.331488] systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped.
[ 4.333619] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 4.333700] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 4.337929] systemd[1]: Starting Load Kernel Modules...
[ 4.339590] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.341318] systemd[1]: Starting Coldplug All udev Devices...
[ 4.343008] systemd[1]: Starting Uncomplicated firewall...
[ 4.346214] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.346515] systemd[1]: Mounted Kernel Debug File System.
[ 4.346731] systemd[1]: Mounted Kernel Trace File System.
[ 4.347773] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 4.348345] systemd[1]: [email protected]: Succeeded.
[ 4.348947] systemd[1]: Finished Load Kernel Module configfs.
[ 4.349456] systemd[1]: [email protected]: Succeeded.
[ 4.350057] systemd[1]: Finished Load Kernel Module drm.
[ 4.351994] systemd[1]: Mounting Kernel Configuration File System...
[ 4.355219] systemd[1]: Mounted Kernel Configuration File System.
[ 4.364261] systemd[1]: Finished Uncomplicated firewall.
[ 4.417320] fuse: init (API version 7.32)
[ 4.418312] systemd[1]: [email protected]: Succeeded.
[ 4.418864] systemd[1]: Finished Load Kernel Module fuse.
[ 4.420513] systemd[1]: Mounting FUSE Control File System...
[ 4.423842] systemd[1]: Mounted FUSE Control File System.
[ 4.453580] systemd[1]: Finished Set the console keyboard layout.
[ 4.520562] systemd[1]: Started Journal Service.
[ 4.587330] Intel(R) Wireless WiFi driver for Linux
[ 4.587352] pci 0000:00:0c.0: attach allowed to drvr iwlwifi [internal device]
[ 4.611904] iwlwifi 0000:00:0c.0: WRT: Overriding region id 0
[ 4.611909] iwlwifi 0000:00:0c.0: WRT: Overriding region id 1
[ 4.611911] iwlwifi 0000:00:0c.0: WRT: Overriding region id 2
[ 4.611912] iwlwifi 0000:00:0c.0: WRT: Overriding region id 3
[ 4.611913] iwlwifi 0000:00:0c.0: WRT: Overriding region id 4
[ 4.611914] iwlwifi 0000:00:0c.0: WRT: Overriding region id 6
[ 4.611916] iwlwifi 0000:00:0c.0: WRT: Overriding region id 8
[ 4.611917] iwlwifi 0000:00:0c.0: WRT: Overriding region id 9
[ 4.611918] iwlwifi 0000:00:0c.0: WRT: Overriding region id 10
[ 4.611919] iwlwifi 0000:00:0c.0: WRT: Overriding region id 11
[ 4.611921] iwlwifi 0000:00:0c.0: WRT: Overriding region id 15
[ 4.611922] iwlwifi 0000:00:0c.0: WRT: Overriding region id 16
[ 4.611923] iwlwifi 0000:00:0c.0: WRT: Overriding region id 18
[ 4.611924] iwlwifi 0000:00:0c.0: WRT: Overriding region id 19
[ 4.611925] iwlwifi 0000:00:0c.0: WRT: Overriding region id 20
[ 4.611927] iwlwifi 0000:00:0c.0: WRT: Overriding region id 21
[ 4.611928] iwlwifi 0000:00:0c.0: WRT: Overriding region id 28
[ 4.612348] iwlwifi 0000:00:0c.0: loaded firmware version 46.6f9f215c.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
[ 4.794595] systemd-journald[188]: Received client request to flush runtime journal.
[ 4.840812] iwlwifi 0000:00:0c.0: Detected Intel(R) Wireless-AC 9560 160MHz, REV=0x318
[ 4.894809] iwlwifi 0000:00:0c.0: base HW address: c8:b2:9b:f7:51:07
[ 4.961958] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.962419] thermal thermal_zone6: failed to read out thermal zone (-61)
[ 19.361014] usb 1-2: new full-speed USB device number 4 using xhci_hcd
[ 19.491707] usb 1-2: New USB device found, idVendor=046d, idProduct=c53f, bcdDevice=44.01
[ 19.491712] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 19.491714] usb 1-2: Product: USB Receiver
[ 19.491716] usb 1-2: Manufacturer: Logitech
[ 19.497345] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.0/0003:046D:C53F.0001/input/input7
[ 19.549433] hid-generic 0003:046D:C53F.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:15.0-2/input0
[ 19.552359] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.1/0003:046D:C53F.0002/input/input8
[ 19.552468] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.1/0003:046D:C53F.0002/input/input9
[ 19.604239] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.1/0003:046D:C53F.0002/input/input10
[ 19.604371] hid-generic 0003:046D:C53F.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:15.0-2/input1
[ 19.607059] hid-generic 0003:046D:C53F.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:15.0-2/input2
[ 20.900104] max98357a MX98357A:00: GPIO lookup for consumer sdmode
[ 20.900108] max98357a MX98357A:00: using ACPI for GPIO lookup
[ 20.900110] acpi MX98357A:00: GPIO: looking up sdmode-gpios
[ 20.900113] acpi MX98357A:00: GPIO: looking up sdmode-gpio
[ 20.900116] acpi MX98357A:00: GPIO: _DSD returned MX98357A:00 0 0 0
[ 20.900189] gpio gpiochip1: Persistence not supported for GPIO 15
[ 20.919501] da7219 i2c-DLGS7219:00: Using default DAI clk names: da7219-dai-wclk, da7219-dai-bclk
[ 21.048785] pci 0000:00:0e.0: attach allowed to drvr snd_hda_intel [internal device]
[ 21.048816] snd_hda_intel 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 21.133011] Could not create tracefs 'cros_ec_sensorhub_filter' directory
[ 21.133018] Could not create tracefs 'cros_ec_sensorhub_filter' directory
[ 21.133022] Could not create tracefs 'cros_ec_sensorhub_data' directory
[ 21.133024] Could not create tracefs 'cros_ec_sensorhub_data' directory
[ 21.133028] Could not create tracefs 'cros_ec_sensorhub_timestamp' directory
[ 21.133030] Could not create tracefs 'cros_ec_sensorhub_timestamp' directory
[ 21.133033] Could not create tracefs 'cros_ec_request_done' directory
[ 21.133036] Could not create tracefs 'cros_ec_request_done' directory
[ 21.133039] Could not create tracefs 'cros_ec_request_start' directory
[ 21.133041] Could not create tracefs 'cros_ec_request_start' directory
[ 21.201562] iwlwifi 0000:00:0c.0 wlp0s12f0: renamed from wlan0
[ 21.305425] Bluetooth: bt_init() Core ver 2.22
[ 21.305469] NET: Registered protocol family 31
[ 21.305471] Bluetooth: bt_init() HCI device and connection manager initialized
[ 21.305477] Bluetooth: hci_sock_init() HCI socket layer initialized
[ 21.305480] Bluetooth: l2cap_init_sockets() L2CAP socket layer initialized
[ 21.305486] Bluetooth: sco_init() SCO socket layer initialized
[ 21.333819] logitech-djreceiver 0003:046D:C53F.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:15.0-2/input0
[ 21.425279] logitech-djreceiver 0003:046D:C53F.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:15.0-2/input1
[ 21.455369] usb 1-7: GPIO lookup for consumer privacy
[ 21.455373] usb 1-7: using ACPI for GPIO lookup
[ 21.455376] acpi device:1b: GPIO: looking up privacy-gpios
[ 21.455378] acpi device:1b: GPIO: looking up privacy-gpio
[ 21.455380] usb 1-7: using lookup tables for GPIO lookup
[ 21.455381] usb 1-7: No GPIO consumer privacy found
[ 21.455383] usb 1-7: Found UVC 1.00 device HD WebCam (04f2:b567)
[ 21.477128] logitech-djreceiver 0003:046D:C53F.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:15.0-2/input2
[ 21.480008] usb 2-3: GPIO lookup for consumer privacy
[ 21.480011] usb 2-3: using ACPI for GPIO lookup
[ 21.480014] acpi device:20: GPIO: looking up privacy-gpios
[ 21.480017] acpi device:20: GPIO: looking up privacy-gpio
[ 21.480018] usb 2-3: using lookup tables for GPIO lookup
[ 21.480020] usb 2-3: No GPIO consumer privacy found
[ 21.480023] usb 2-3: Found UVC 1.00 device 8MP World Facing (0bda:5647)
[ 21.529725] logitech-djreceiver 0003:046D:C53F.0003: device of type eQUAD Lightspeed 1.1 (0x0d) connected on slot 1
[ 21.530187] input: Logitech Wireless Mouse PID:4074 Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.2/0003:046D:C53F.0003/0003:046D:4074.0004/input/input12
[ 21.530386] input: Logitech Wireless Mouse PID:4074 Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.2/0003:046D:C53F.0003/0003:046D:4074.0004/input/input13
[ 21.530469] hid-generic 0003:046D:4074.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Mouse PID:4074] on usb-0000:00:15.0-2/input2:1
[ 21.541557] usbcore: registered new interface driver uvcvideo
[ 21.573184] pci 0000:00:0e.0: attach allowed to drvr snd_soc_skl [internal device]
[ 21.573221] snd_soc_skl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 21.574988] usb 1-9: GPIO lookup for consumer reset
[ 21.574991] usb 1-9: using ACPI for GPIO lookup
[ 21.574994] acpi device:1d: GPIO: looking up reset-gpios
[ 21.574997] acpi device:1d: GPIO: looking up reset-gpio
[ 21.575001] acpi device:1d: GPIO: _DSD returned device:1d 0 0 1
[ 21.575079] gpio gpiochip1: Persistence not supported for GPIO 33
[ 21.575293] usbcore: registered new interface driver btusb
[ 21.575790] Bluetooth: btintel_version_info() hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 21.576749] Bluetooth: btintel_read_boot_params() hci0: Device revision is 2
[ 21.576751] Bluetooth: btintel_read_boot_params() hci0: Secure boot is enabled
[ 21.576753] Bluetooth: btintel_read_boot_params() hci0: OTP lock is enabled
[ 21.576753] Bluetooth: btintel_read_boot_params() hci0: API lock is enabled
[ 21.576754] Bluetooth: btintel_read_boot_params() hci0: Debug lock is disabled
[ 21.576756] Bluetooth: btintel_read_boot_params() hci0: Minimum firmware build 1 week 10 2014
[ 21.595887] Bluetooth: btintel_download_fw() hci0: Found device firmware: intel/ibt-17-16-1.sfi
[ 21.730819] input: Logitech G305 as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.2/0003:046D:C53F.0003/0003:046D:4074.0004/input/input17
[ 21.731054] logitech-hidpp-device 0003:046D:4074.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech G305] on usb-0000:00:15.0-2/input2:1
[ 21.819051] pci 0000:00:0e.0: attach allowed to drvr sof-audio-pci-intel-apl [internal device]
[ 21.819091] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 21.819331] sof-audio-pci-intel-apl 0000:00:0e.0: DSP detected with PCI class/subclass/prog-if 0x040100
[ 21.819477] sof-audio-pci-intel-apl 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
[ 21.824848] sof-audio-pci-intel-apl 0000:00:0e.0: use msi interrupt mode
[ 21.834628] sof-audio-pci-intel-apl 0000:00:0e.0: codec #2 probe error, ret: -2
[ 21.834782] sof-audio-pci-intel-apl 0000:00:0e.0: no hda codecs found!
[ 21.837660] sof-audio-pci-intel-apl 0000:00:0e.0: Direct firmware load for intel/sof/community/sof-glk.ri failed with error -2
[ 21.837664] sof-audio-pci-intel-apl 0000:00:0e.0: error: request firmware intel/sof/community/sof-glk.ri failed err: -2
[ 21.837669] sof-audio-pci-intel-apl 0000:00:0e.0: you may need to download the firmware from https://github.com/thesofproject/sof-bin/
[ 21.837671] sof-audio-pci-intel-apl 0000:00:0e.0: error: failed to load DSP firmware -2
[ 21.841552] sof-audio-pci-intel-apl 0000:00:0e.0: error: sof_probe_work failed err: -2
[ 23.000181] Bluetooth: btintel_download_wait() hci0: Waiting for firmware download to complete
[ 23.000710] Bluetooth: btintel_download_wait() hci0: Firmware loaded in 1371893 usecs
[ 23.000767] Bluetooth: btintel_boot_wait() hci0: Waiting for device to boot
[ 23.014721] Bluetooth: btintel_boot_wait() hci0: Device booted in 13643 usecs
[ 23.014730] Bluetooth: msft_skb_pull() hci0: Malformed MSFT vendor event: 0x02
[ 23.019738] Bluetooth: btintel_load_ddc_config() hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[ 23.021791] Bluetooth: btintel_load_ddc_config() hci0: Applying Intel DDC parameters completed
[ 23.025764] Bluetooth: btintel_set_debug_features() hci0: set debug features: trace_enable 0x02 mask 0x7f
[ 23.026766] Bluetooth: btintel_version_info() hci0: Firmware revision 0.1 build 168 week 48 2020
[ 23.085750] Bluetooth: msft_le_set_advertisement_filter_enable_cb() hci0: MSFT filter_enable is already on
[ 32.187797] logitech-hidpp-device 0003:046D:4074.0004: HID++ 4.2 device connected.
[ 33.754737] rfkill: input handler disabled
[ 40.838908] rfkill: input handler enabled
[ 43.335987] rfkill: input handler disabled
from breath.
Try running bash updatekernel.sh on your Linux PC (not your chromebook) again.
from breath.
This did not work as well.
from breath.
While not exact, this might be relevant. It looks like there is a bug in the kernel for these types of touchpads?
from breath.
Could you post the output of lsmod
within ChromeOS?
from breath.
`lsmod` output
Module Size Used by
snd_seq_dummy 16384 0
snd_seq 57344 5 snd_seq_dummy
snd_seq_device 16384 1 snd_seq
bridge 110592 0
stp 16384 1 bridge
llc 16384 2 bridge,stp
tun 36864 0
nf_nat_tftp 16384 0
nf_conntrack_tftp 16384 1 nf_nat_tftp
nf_nat_ftp 16384 0
nf_conntrack_ftp 16384 1 nf_nat_ftp
xfrm6_mode_tunnel 16384 0
xfrm6_mode_transport 16384 0
xfrm4_mode_tunnel 16384 0
xfrm4_mode_transport 16384 0
esp6 20480 0
ah6 20480 0
ip6t_REJECT 16384 2
ip6t_ipv6header 16384 0
vhost_vsock 20480 5
vhost 36864 1 vhost_vsock
vmw_vsock_virtio_transport_common 24576 1 vhost_vsock
vsock 36864 7 vmw_vsock_virtio_transport_common,vhost_vsock
ccm 20480 9
rfcomm 45056 2
cmac 16384 3
veth 16384 0
algif_hash 16384 1
algif_skcipher 16384 1
af_alg 20480 6 algif_hash,algif_skcipher
uinput 20480 0
xt_cgroup 16384 2
ipt_MASQUERADE 16384 1
nf_nat_masquerade_ipv4 16384 1 ipt_MASQUERADE
xt_mark 16384 96
uvcvideo 86016 0
videobuf2_vmalloc 16384 1 uvcvideo
snd_soc_sst_bxt_da7219_max98357a 24576 3
snd_soc_hdac_hdmi 28672 1 snd_soc_sst_bxt_da7219_max98357a
snd_soc_dmic 16384 1
sof_pci_dev 16384 0
snd_sof_xtensa_dsp 16384 1 sof_pci_dev
snd_sof_intel_hda_common 49152 1 sof_pci_dev
snd_sof_intel_hda 16384 1 snd_sof_intel_hda_common
snd_soc_hdac_hda 20480 1 snd_sof_intel_hda_common
snd_sof 73728 2 snd_sof_intel_hda_common,sof_pci_dev
snd_soc_acpi_intel_match 28672 2 snd_sof_intel_hda_common,sof_pci_dev
snd_soc_acpi 16384 2 snd_soc_acpi_intel_match,sof_pci_dev
snd_hda_ext_core 20480 4 snd_sof_intel_hda_common,snd_soc_hdac_hdmi,snd_soc_hdac_hda,snd_sof_intel_hda
snd_hda_codec 106496 1 snd_soc_hdac_hda
snd_hwdep 16384 1 snd_hda_codec
snd_hda_core 61440 6 snd_hda_ext_core,snd_hda_codec,snd_sof_intel_hda_common,snd_soc_hdac_hdmi,snd_soc_hdac_hda,snd_sof_intel_hda
snd_soc_max98357a 16384 1
snd_soc_da7219 65536 2 snd_soc_sst_bxt_da7219_max98357a
ip6table_nat 16384 1
nf_nat_ipv6 16384 1 ip6table_nat
fuse 102400 20
hid_rmi 16384 0
rmi_core 45056 1 hid_rmi
iio_trig_sysfs 16384 0
cros_ec_lid_angle 16384 0
cros_ec_sensors_sync 16384 0
cros_ec_sensors 16384 0
cros_ec_sensors_core 16384 3 cros_ec_sensors,cros_ec_lid_angle,cros_ec_sensors_sync
industrialio_triggered_buffer 16384 2 cros_ec_lid_angle,cros_ec_sensors_core
kfifo_buf 16384 2 industrialio_triggered_buffer,cros_ec_sensors_core
industrialio 57344 7 industrialio_triggered_buffer,cros_ec_sensors,cros_ec_lid_angle,kfifo_buf,iio_trig_sysfs,cros_ec_sensors_sync,cros_ec_sensors_core
cros_ec_sensorhub 20480 1 cros_ec_sensors_core
iwlmvm 438272 0
iwl7000_mac80211 704512 1 iwlmvm
lzo_rle 16384 4
lzo_compress 16384 1 lzo_rle
zram 20480 1
iwlwifi 368640 1 iwlmvm
cfg80211 536576 3 iwl7000_mac80211,iwlmvm,iwlwifi
btusb 45056 0
btrtl 16384 1 btusb
btintel 24576 1 btusb
btbcm 16384 1 btusb
bluetooth 442368 32 btrtl,btintel,btbcm,btusb,rfcomm
ecdh_generic 24576 1 bluetooth
joydev 24576 0
from breath.
Could you run ls /sys/bus/i2c/devices
within ChromeOS and Breath?
from breath.
ChromeOS - `ls /sys/bus/i2c/devices`
i2c-0
i2c-1
i2c-10
i2c-11
i2c-12
i2c-2
i2c-3
i2c-4
i2c-5
i2c-6
i2c-7
i2c-8
i2c-9
i2c-DLGS7219:00
i2c-PNP0C50:00
i2c-RAYD0001:00
i2c-STH9310:00
i2c-WCOM50C1:00
Breath - `ls /sys/bus/i2c/devices`
i2c-0
i2c-1
i2c-10
i2c-11
i2c-12
i2c-2
i2c-3
i2c-4
i2c-5
i2c-6
i2c-7
i2c-8
i2c-9
i2c-DLGS7219:00
i2c-PNP0C50:00
i2c-RAYD0001:00
i2c-STH9310:00
i2c-WCOM50C1:00
from breath.
Got it.
from breath.
Must be something with pinctrl
, the i2c drivers are working.
from breath.
Sorry, I'm not familiar with pinctrl
.
from breath.
The more I research this issue, the more it appears to be a kernel bug. I'm not knowledgeable about the Linux kernel, and honestly may be conflating different issues as the same. https://forum.manjaro.org/t/etps-2-touchpad-not-working-kernel-bug-on-tigerlake/74132/7
I'm not sure, is it possible to integrate a patch into the chromeos kernel?
from breath.
I think I'll use a factory (default) kernel for octopus chromebooks. Expect a fix to be out by tomorrow.
from breath.
On second thought, factory kernels forbid audio from working. I suspect this problem has to do with my kernel configuration.
from breath.
I saw some of your latest commit was changing flags on what looked like touchpad devices. Would that happen to be your current fix?
from breath.
Yeah, I was just enabling random options related to synaptic, PS/2, and i2c touchpads. Plug in the Breath USB and try running bash updatekernel.sh
again.
from breath.
I was hoping, but that didn't work.
from breath.
As a last try, run VERSION=5.4 bash updatekernel.sh
and post the output of dmesg
from breath.
Lol, new issue. Something is corrupting the boot. It looks like this;
It usually crashes, but sometimes I get to login and then it crashes. 🙃 So it might be a while before I can get you that 'dmesg' output.
from breath.
Issue moved to #29. Your issue is not closed, I'm just tracking similar errors in one page.
from breath.
Related Issues (20)
- Can't boot from Breath USB - Acer 713 i5 Tiger Lake HOT 2
- Can't boot from Breath USB - Asus C433 i5 HOT 2
- black screen bootup HOT 11
- Black screen - not booting on HP 11 G6 EE HOT 2
- reboots after few minutes of usage HOT 2
- No Audio - Lenovo IdeaPad Flex 3i Chromebook Gen 6 (11" Intel N4500) (BOTENFLEX) HOT 2
- No Audio - Acer CB317-1H-C994 (Jasper Lake) HOT 1
- Audio fault on Lenovo 100E Gen 2 Intel Celelron N4020 HOT 7
- HP Chromebook 11 G6 EE Celeron - no sound HOT 1
- apl-sof-setup-audio doesn't run on debian 11 HOT 11
- How to create an UEFI Image HOT 3
- Samsung Chromebook Pro (Caroline) - setup-audio not working
- Can't expand USB image to use available space HOT 2
- No Audio (via speakers OR headphones) Samsung Galaxy Chromebook Comet Lake
- Wireguard doesn't work HOT 1
- no password requested HOT 1
- Arch KDE cannot be built with CROSTINI HOT 2
- Dead? HOT 2
- Hearphone jack sound not working in [LARS] Chromebook 14 For Work HOT 2
- Blank screen on Lenovo Gaming Chromebook 16 "Taniks" (Alder Lake) HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from breath.