Comments (58)
Are you using 0.4.0? Can you send me the log located at sdmc:/config/sys-con/log.txt
?
from sys-con.
yes 0.4.0.
log.txt
from sys-con.
I see you've used it in previous versions, did it work then?
from sys-con.
No has always just shown the icon for controller but no inputs work. Normal xbone controller works. Also I have 3 elite ones so it should not be a specific controller issue.
from sys-con.
Can you try this build? https://files.catbox.moe/3e0jbl.rar
from sys-con.
Still no inputs working. let me know if there anything I can do to further help.
from sys-con.
I've got lots of builds to try if this doesn't work, try this one https://files.catbox.moe/sw1b9n.rar
from sys-con.
That build actually neither elite nor regular worked. both just got noticed with controller icon
from sys-con.
I have high hopes for this one: https://files.catbox.moe/ehjdrw.rar
from sys-con.
sorry, again neither normal xbone controller or elite are working. just the controller icon shows up.
from sys-con.
I switched back to your latest release 0.4.1 and normal xbone controller is working again however let me know if there is other builds to try for elite controller though!
from sys-con.
Can you tell me if this does anything? https://files.catbox.moe/7z21da.rar
from sys-con.
This seems like same result. Neither normal xbone or xbone elite controller have any inputs working.
from sys-con.
What about this one? https://files.catbox.moe/wf78gk.rar
from sys-con.
no sorry just gets noticed again for both
from sys-con.
How about now? https://files.catbox.moe/ko13p8.rar
from sys-con.
No, same result. Any other config or something i can send to help?
from sys-con.
It's just baffling to me that the elite controller doesn't work. The regular one especially. Every single build I've sent works with my Xbox One S controller. Try this https://files.catbox.moe/qlyaeo.rar
from sys-con.
im using really old first edition xbone controller if that makes a difference. ill try that build in a second, The actual release 0.4.1 works on it.
from sys-con.
No sorry still just controller plugged in icon. I tried 2 different regular controllers (non S version) and 3 elite controllers and restarted the switched 2 times and had same result each time.
from sys-con.
I also tried taking the batteries out and in on each if that makes a difference somehow.
from sys-con.
Can you try downloading one of the earliest versions of the sysmodule (0.2.0, 0.2.1) and see if the elite controller works there?
from sys-con.
Tried both. These did not even recognize the controllers with the icon or inputs. Seemed like they where not noticed at all on both versions. again tried 2 regular and 3 elite.
from sys-con.
That's weird. There was video proof showcasing an Xbox One Elite controller working just fine even with the earliest release of sys-con: https://www.youtube.com/watch?v=3Cxwyl1xYCE
The elite controller that was recognized even has the same vendor/product IDs as yours. Only explanation I can see is that a firmware update got installed to all of your xbox controllers which requires a different setup packet to be sent before it starts sending any input.
from sys-con.
maybe i can try updating mine. you think CFW matters?
from sys-con.
Switch CFW doesn't matter. If your controllers are on the latest update I don't think you can go back. But you could try, not like it gets any worse than this
from sys-con.
Actually maybe I could update my controller and see too
from sys-con.
Mine is up to date. Firmware 3.1.1221.0
from sys-con.
my elite controllers where up to date but the normal controller did receive an update.
from sys-con.
Do any of the builds that weren't working with the normal controllers work now?
from sys-con.
tried the last build you sent and no, same thing with normal. my elite controller had no update so obviously no change. really wondering what that guy with the videos different variable was.
from sys-con.
Try this version https://files.catbox.moe/3o3431.rar
from sys-con.
Hey,
I have the same issue as @Lockheed-Martini .
I tried every version posted here and it is not working.
from sys-con.
btw: the log throws out this on v0.4.1:
2019-10-10 00:00:00: Succeeded event 1118
2019-10-10 00:00:00: Interfaces size: 0; capacity: 8
2019-10-10 00:00:00: Error creating interface for product 739 with error 69
2019-10-10 00:00:00: Interface state was changed
from sys-con.
This is not 0.4.1. You're using an old version. Make sure the file located at /atmosphere/titles/690000000000000D/exefs.nsp
is replaced.
from sys-con.
I see. I just deleted the folder and extracted the archive.
Looks like v041 doesn't create a log.txt at all.
Icon is showing up, but no input is recognized.
from sys-con.
v0.2.2 does seem to work.
Log output:
New sysmodule session started
2019-10-10 00:00:00: Successfully created event 1118
2019-10-10 00:00:00: Successfully created event 1356
2019-10-10 00:00:00: Succeeded event 1118
2019-10-10 00:00:00: Interfaces size: 0; capacity: 8
2019-10-10 00:00:00: Interface created successfully on product 739
from sys-con.
Works as in, it reads input? Or just the icon?
from sys-con.
It works flawlessly :) (reads every button input)
from sys-con.
Thanks for your feedback, we're finally getting somewhere. 0.4.1 changed the log location to sdmc:/config/sys-con/log.txt
, can you send me its output?
from sys-con.
log of v0.4.1 (although it states 0.4.0):
New sysmodule session started on version 0.4.0
2019-10-10 00:00:00: Successfully created event for Dualshock 3
2019-10-10 00:00:00: Successfully created catch-all event
2019-10-10 00:00:00: Catch-all event went off
2019-10-10 00:00:00: Catch-all event went off
2019-10-10 00:00:00: Catch-all event went off
2019-10-10 00:00:00: Registering Xbox One controller
2019-10-10 00:00:00: Send a specific init packet for controller v1118 p739 with outPacket 0
2019-10-10 00:00:00: Interface created successfully
from sys-con.
That's really weird. There's only one thing that could be possibly different between these versions and I removed it, try it now: https://files.catbox.moe/g7u6sx.rar
from sys-con.
wait no
from sys-con.
This build should be identical to 0.2.2: https://files.catbox.moe/jwliyq.rar
from sys-con.
The build you posted last is still working
Log output:
New sysmodule session started on version 0.4.0
2019-10-10 00:00:00: Successfully created event for Dualshock 3
2019-10-10 00:00:00: Successfully created catch-all event
2019-10-10 00:00:00: Catch-all event went off
2019-10-10 00:00:00: Catch-all event went off
2019-10-10 00:00:00: Registering Xbox One controller
2019-10-10 00:00:00: Send a specific init packet 2 for controller v1118 p739
2019-10-10 00:00:00: Interface created successfully
2019-10-10 00:00:00: Update was called with data: 48 48 58 32 82 101 103 105 115 116 101 114 105 110 103 32 88 98 111 120 32 79 110 101 32 99 111 110 116 114 111 108 108 101 114 10 118 101 110 116 10 111 99 107 32 51 10 48 46 52 46 48 10 0 0 0 0 0 0 0 0 0 0 0
2019-10-10 00:00:00: Update was called with data: 32 0 2 29 32 0 0 0 0 0 246 6 139 247 51 4 62 243 32 0 0 0 0 0 245 6 140 247 51 4 63 243 0 12 45 88 0 0 0 0 80 3 0 8 0 0 0 0 0 208 47 88 0 0 0 0 0 0 0 0 0 0 0 1
2019-10-10 00:00:00: Update was called with data: 32 0 3 29 0 0 0 0 0 0 246 6 139 247 51 4 62 243 0 0 0 0 0 0 245 6 140 247 51 4 63 243 0 12 45 88 0 0 0 0 80 3 0 8 0 0 0 0 0 208 47 88 0 0 0 0 0 0 0 0 0 0 0 1
2019-10-10 00:00:00: Update was called with data: 32 0 4 29 0 8 0 0 0 0 246 6 139 247 51 4 62 243 0 8 0 0 0 0 245 6 140 247 51 4 63 243 0 12 45 88 0 0 0 0 80 3 0 8 0 0 0 0 0 208 47 88 0 0 0 0 0 0 0 0 0 0 0 1
... (truncated by cathery)
from sys-con.
Oh great! Have you tried the one i posted before it, by chance? does it work there?
from sys-con.
Just tested it. Build g7u6sx.rar is also working!
Log output:
New sysmodule session started on version 0.4.0
2019-10-10 00:00:00: Successfully created event for Dualshock 3
2019-10-10 00:00:00: Successfully created catch-all event
2019-10-10 00:00:00: Catch-all event went off
2019-10-10 00:00:00: Catch-all event went off
2019-10-10 00:00:00: Registering Xbox One controller
2019-10-10 00:00:00: Send a specific init packet 2 for controller v1118 p739
2019-10-10 00:00:00: Send a specific init packet 3 for controller v1118 p739
2019-10-10 00:00:00: Send a specific init packet 4 for controller v1118 p739
2019-10-10 00:00:00: Interface created successfully
2019-10-10 00:00:00: Update was called with data: 4 160 1 186 0 58 0 2 0 1 0 2 0 2 0 2 0 3 0 0 8 1 2 3 4 6 7 12 30 7 1 4 5 6 10 12 30 2 26 0 87 105 110 100 111 119 115 46 88 98 111 120 46 73 110 112 117 116 46 71 97 109 101 112
2019-10-10 00:00:00: Update was called with data: 7 32 2 2 0 91 0 0 0 0 0 0 0 0 0 0 48 3 0 8 0 0 0 0 184 134 160 68 0 0 0 0 96 29 173 68 0 0 0 0 80 3 0 8 0 0 0 0 0 208 175 68 0 0 0 0 0 0 46 71 97 109 101 1
2019-10-10 00:00:00: Update was called with data: 32 0 2 29 0 0 0 0 0 0 216 6 15 251 152 2 94 243 0 0 0 0 0 0 215 6 15 251 152 2 95 243 0 29 173 68 0 0 0 0 80 3 0 8 0 0 0 0 0 208 175 68 0 0 0 0 0 0 46 71 97 109 101 1
2019-10-10 00:00:00: Update was called with data: 32 0 3 29 0 0 0 0 0 0 216 6 115 251 152 2 94 243 0 0 0 0 0 0 215 6 115 251 152 2 95 243 0 29 173 68 0 0 0 0 80 3 0 8 0 0 0 0 0 208 175 68 0 0 0 0 0 0 46 71 97 109 101 1
... (truncated by cathery)
from sys-con.
Try this version https://files.catbox.moe/3o3431.rar
Going through the responses, tried this one and normal works great elite just noticed.
This build should be identical to 0.2.2: https://files.catbox.moe/jwliyq.rar
OH BOY.
tried this one and it works!!!!
from sys-con.
holy crap!!
from sys-con.
This will be the last build to test. Does everything work in it still? https://files.catbox.moe/ucmflq.rar
from sys-con.
Works great!
one thing i noticed but maybe it was nothing. I plugged elite in and it showed up but no inputs worked. Unplugged and plugged back in and it worked!
I also tried normal controller and docked and portable and all is working great!
Seriously thank you for your hard work man this is awesome, so happy i can use my favorite controller!
from sys-con.
Huh alright. If you unplug all your controllers and restart the console, does it still need to be plugged in twice for it to work?
from sys-con.
after a restart and plugging it back in it worked perfect first try.
from sys-con.
Nice. I'll use this version in the release
from sys-con.
I'm sorry to say this so soon after a presumed solution was found, but that latest build is giving me identical errors with an Elitev1 controller. Plugging it in has the switch recognize it as a pro controller, but none of the inputs work. :\ Resetting the console/unplugging+replugging the controller gave no change.
from sys-con.
Does this one work? https://files.catbox.moe/jwliyq.rar
from sys-con.
I'm... embarrassed to say that I'd somehow mixed up the files from latest build you shared with those of an earlier one. The 'ucmflq' build works entirely. Apologies for the false flagging.
from sys-con.
Good. I'm so relieved
from sys-con.
Related Issues (20)
- PowerA Xbox One Controller not working HOT 1
- crashing on latest firmware, 14 something
- Does it work on 14.X? HOT 1
- Xbox one controller only works when connected directly to the console. HOT 1
- 0.6.4 not working with HOS 15.0.1
- Switch Freezes while in dock mode when in sleep mode for too long HOT 2
- Compatibility with Logitech G920 HOT 6
- Unable to build HOT 1
- Getting failed to read from config in log file. HOT 1
- Not Working on FW15.0.0.3 HOT 2
- Blocks the operation of an audio Wifi connected to the USB HOT 3
- Mapping share button on Xbox Series X|S controllers to screenshot HOT 4
- [Feature Request] Guide explaining how we can create support for our own controllers. HOT 2
- Joycon controllers issui
- Joycon controllers issui HOT 2
- Stuck on the change grip interface HOT 1
- Sys-con doesn't work on latest firmwares HOT 4
- Wired Dualshock 3 controllers not working if MissionControl 0.9.1 or later is installed
- 8BitDo Ultimate C 2.4 GHz support?
- I have a problem with Sys-con, with the pdp control HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from sys-con.