Git Product home page Git Product logo

Comments (21)

SuperErnD avatar SuperErnD commented on September 22, 2024 2

Click on the install button on the magisk app. 1. On the subsequent screen, select the option “Direct install into system partition.“ 4. Click on the “Let’s go” button located next to the selected option. 5. When it’s done, click the “Restart” button shown at the bottom right. If this does not work as well let me know !

image
i dont have a direct install into ...., i have only patch boot image

from waydroid_script.

casualsnek avatar casualsnek commented on September 22, 2024 1

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

It was a brand new installation

Weird ! Can you share output of cat /proc/cmdline and uname -r ?

For me the solution was to swap to this kernel. So probably not a problem with your script https://aur.archlinux.org/packages/linux-xanmod-anbox

Yes, xanmod is must with psi=1 kernel parameter to get magisk running on waydroid on Arch !

from waydroid_script.

baptx avatar baptx commented on September 22, 2024 1

I got Magisk installed and Zygisk enabled here:
#143 (comment)

from waydroid_script.

mistrmochov avatar mistrmochov commented on September 22, 2024

Same here on archlinux with linux-zen kernel. Tried also with linux-xanmod-anbox kernel, that didn't work either.

from waydroid_script.

casualsnek avatar casualsnek commented on September 22, 2024

Click on the install button on the magisk app.
1. On the subsequent screen, select the option “Direct install into system partition.“
4. Click on the “Let’s go” button located next to the selected option.
5. When it’s done, click the “Restart” button shown at the bottom right.
If this does not work as well let me know !

from waydroid_script.

mistrmochov avatar mistrmochov commented on September 22, 2024

Hi, thanks for you reply ^^
Howewer these options aren't here at all, It seems like It completle failed to root It. I don't know If I'm doing something wrong.
Tried already on Debian, Fedora and Arch, while distro hoping.

from waydroid_script.

0a00 avatar 0a00 commented on September 22, 2024

I don't have this option in my environment either,
图片

from waydroid_script.

iFlxy avatar iFlxy commented on September 22, 2024

I'm having the same issue.

from waydroid_script.

MakandaDEV avatar MakandaDEV commented on September 22, 2024

Same Issue @casualsnek. It seems your Magisk script is outdated.

from waydroid_script.

ryanrudolfoba avatar ryanrudolfoba commented on September 22, 2024

Same behavior for me on Fedora install.

from waydroid_script.

blacklightpy avatar blacklightpy commented on September 22, 2024

Same here on Void Linux

from waydroid_script.

mistrmochov avatar mistrmochov commented on September 22, 2024

Unfortunately It doesn't work on any liznux distribution.
You can go with my script temporarily https://github.com/mistrmochov/magiskWaydroid

from waydroid_script.

ryanrudolfoba avatar ryanrudolfoba commented on September 22, 2024

Unfortunately It doesn't work on any liznux distribution. You can go with my script temporarily https://github.com/mistrmochov/magiskWaydroid

i tried yours the other day and it didnt work either. gonna try again on an older lineageos build from Nov / early Dec

from waydroid_script.

casualsnek avatar casualsnek commented on September 22, 2024

Thanks for reporting, latest magisk-delta has some issues starting on magisk. I will try downgrading magisk to get it working at the moment, till i find a way to get latest builds working again !

from waydroid_script.

casualsnek avatar casualsnek commented on September 22, 2024

It's downgraded now ! Magisk should work now. Can you test it ?

from waydroid_script.

Techwizz-somboo avatar Techwizz-somboo commented on September 22, 2024

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

from waydroid_script.

casualsnek avatar casualsnek commented on September 22, 2024

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

from waydroid_script.

Techwizz-somboo avatar Techwizz-somboo commented on September 22, 2024

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

It was a brand new installation

from waydroid_script.

casualsnek avatar casualsnek commented on September 22, 2024

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

It was a brand new installation

Weird ! Can you share output of cat /proc/cmdline and uname -r ?

from waydroid_script.

Techwizz-somboo avatar Techwizz-somboo commented on September 22, 2024

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

It was a brand new installation

Weird ! Can you share output of cat /proc/cmdline and uname -r ?

For me the solution was to swap to this kernel. So probably not a problem with your script https://aur.archlinux.org/packages/linux-xanmod-anbox

from waydroid_script.

AlecBlance avatar AlecBlance commented on September 22, 2024

I got Magisk installed and Zygisk enabled here: #143 (comment)

Thanks! I got my Zygisk this way. For now, this will suffice but, it'd be good if we will have the latest magisk-delta. Hopefully, they will sort it out.

from waydroid_script.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.