Git Product home page Git Product logo

Comments (8)

avatar commented on May 14, 2024

When i trigger it on and off in homekit, homekit shows it turning on and off, but nothing actually happens to the switch. This error is reported in Homebridge logs:

[18/12/2020, 16:18:59] [Bedside Lamp] Failed to POST to the Meross Device MSS210 at 192.168.1.158: Error: connect EHOSTUNREACH 192.168.1.158:80
at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1146:16) {
errno: -113,
code: 'EHOSTUNREACH',
syscall: 'connect',
address: '192.168.1.158',
port: 80

Edit: i uninstalled everything and reinstalled one switch, and it is unchanged. When i first pressed the button to turn it on it switched off then on very quickly, and is now responsive. I'm confident i have the correct IP address and other details.

from homebridge-meross.

megabashment avatar megabashment commented on May 14, 2024

I got the same problem. I have the MS 310 working without a problem. Now adding new MS 210 for my christmas tree but it doesn´t work.


[24/12/2020, 14:49:50] xx 3] Failed to POST to the Meross Device MSS210 at 192.168 178.76: Error: connect ETIMEDOUT 192.0.0.168:80
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1146:16) {
  errno: -110,
  code: 'ETIMEDOUT',
  syscall: 'connect',
  address: '192.0.0.168',
  port: 80
}
[24/12/2020, 14:49:51] xx 3] Failed to POST to the Meross Device MSS210 at 192.168 178.76: Error: connect ETIMEDOUT 192.0.0.168:80
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1146:16) {
  errno: -110,
  code: 'ETIMEDOUT',
  syscall: 'connect',
  address: '192.0.0.168',
  port: 80
}
[24/12/2020, 14:49:54] xx 3] Failed to POST to the Meross Device MSS210 at 192.168 178.76: Error: connect ETIMEDOUT 192.0.0.168:80
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1146:16) {
  errno: -110,
  code: 'ETIMEDOUT',
  syscall: 'connect',
  address: '192.0.0.168',
  port: 80
}
[24/12/2020, 14:49:59] xx 3] Failed to POST to the Meross Device MSS210 at 192.168 178.76: Error: connect ETIMEDOUT 192.0.0.168:80
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1146:16) {
  errno: -110,
  code: 'ETIMEDOUT',
  syscall: 'connect',
  address: '192.0.0.168',
  port: 80
}
[24/12/2020, 14:49:59] xx 3] Failed to POST to the Meross Device MSS210 at 192.168 178.76: Error: connect ETIMEDOUT 192.0.0.168:80
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1146:16) {
  errno: -110,
  code: 'ETIMEDOUT',
  syscall: 'connect',
  address: '192.0.0.168',
  port: 80
}
[24/12/2020, 14:49:59] xx 3] Set failed: false
[24/12/2020, 14:50:01] xx 3] Failed to POST to the Meross Device MSS210 at 192.168 178.76: Error: connect ETIMEDOUT 192.0.0.168:80
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1146:16) {
  errno: -110,
  code: 'ETIMEDOUT',
  syscall: 'connect',
  address: '192.0.0.168',
  port: 80
}
[24/12/2020, 14:50:05] xx 3] Failed to POST to the Meross Device MSS210 at 192.168 178.76: Error: connect ETIMEDOUT 192.0.0.168:80
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1146:16) {
  errno: -110,
  code: 'ETIMEDOUT',
  syscall: 'connect',
  address: '192.0.0.168',
  port: 80
}
[24/12/2020, 14:50:06] xx 3] Failed to POST to the Meross Device MSS210 at 192.168 178.76: Error: connect ETIMEDOUT 192.0.0.168:80
    at TCPConnectWrap.afterConnect [as oncomplete] (net.js:1146:16) {
  errno: -110,
  code: 'ETIMEDOUT',
  syscall: 'connect',
  address: '192.0.0.168',
  port
```: 80
}

from homebridge-meross.

tonystower avatar tonystower commented on May 14, 2024

Same here! With two MSS210 plugs. V frustrating, hope a solution can be found soon.

from homebridge-meross.

donavanbecker avatar donavanbecker commented on May 14, 2024

See #151

from homebridge-meross.

hectorkd avatar hectorkd commented on May 14, 2024

My mss210 plugs are working perfectly in HomeKit but it shows they have an update available in the Meross app but when I go there it says they're all up to date?
IMG_1514
IMG_1516

from homebridge-meross.

avatar commented on May 14, 2024

My mss210 plugs are working perfectly in HomeKit

Worth pointing out there are at least 2 flavours of MSS201, one HomeKit natively enabled and one not. I would suggest you don’t connect your HK enabled MSS210 through home bridge, just connect straight to Home

from homebridge-meross.

hectorkd avatar hectorkd commented on May 14, 2024

My mss210 plugs are working perfectly in HomeKit

Worth pointing out there are at least 2 flavours of MSS201, one HomeKit natively enabled and one not. I would suggest you don’t connect your HK enabled MSS210 through home bridge, just connect straight to Home

These are the MSS210 plugs that don't natively work with HomeKit, which is why I am using home bridge to get them into HomeKit

from homebridge-meross.

caseypugh avatar caseypugh commented on May 14, 2024

I'm also getting this same exact error with MSG200 (smart garage opener, firmware 2.1.3 - hardware 2.0.0). When I first set this up, it was working great for a couple weeks. As of today it has completely stopped and getting this message non-stop in Homebridge logs

[1/26/2021, 4:36:13 PM] [Right Garage Door] Error: socket hang up
[1/26/2021, 4:36:14 PM] [Left Garage Door] Failed to POST to the Meross Device MSG200 at 192.168.0.162: Error: socket hang up
    at connResetException (internal/errors.js:607:14)
    at Socket.socketOnEnd (_http_client.js:493:23)
    at Socket.emit (events.js:327:22)
    at endReadableNT (internal/streams/readable.js:1327:12)
    at processTicksAndRejections (internal/process/task_queues.js:80:21) {
  code: 'ECONNRESET'
}
[1/26/2021, 4:36:14 PM] [Left Garage Door] Error: socket hang up
[1/26/2021, 4:36:14 PM] [Right Garage Door] Failed to POST to the Meross Device MSG200 at 192.168.0.162: Error: read ECONNRESET
    at TCP.onStreamRead (internal/stream_base_commons.js:209:20) {
  errno: -104,
  code: 'ECONNRESET',
  syscall: 'read'
}
[1/26/2021, 4:36:14 PM] [Right Garage Door] Error: read ECONNRESET

My config

"accessories": [
        {
            "model": "MSG200",
            "name": "Left Garage Door",
            "firmwareRevision": "2.1.3",
            "deviceUrl": "192.168.0.162",
            "channel": 1,
            "messageId": "09b...5ffb",
            "timestamp": 0,
            "sign": "bcdb...5a0d",
            "garageDoorOpeningTime": 13,
            "accessory": "Meross"
        },
        {
            "model": "MSG200",
            "name": "Right Garage Door",
            "firmwareRevision": "2.1.3",
            "deviceUrl": "192.168.0.162",
            "channel": 2,
            "messageId": "09b...5ffb",
            "timestamp": 0,
            "sign": "bcdb...5a0d",
            "garageDoorOpeningTime": 13,
            "accessory": "Meross"
        }
    ],

I wonder if it got a firmware update automatically and the API format has changed? I also tried to update the login credentials but that also did not work.

from homebridge-meross.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.