Comments (11)
benjojo
commented on May 27, 2024
./de-ip-hdmi -interface XXX -raw | ffplay -
replace ffplay with vlc if you don't have ffmpeg installed, but you will likely need ffmpeg anyway for anything that isnt -raw mode
from de-ip-hdmi.
Heath3827
commented on May 27, 2024
No joy:
sudo de-ip-hdmi -interface wlo0 -raw | ffplay -
[sudo] password for andrew: ffplay version 3.4.6-0ubuntu0.18.04.1 Copyright (c) 2003-2019 the FFmpeg developers
built with gcc 7 (Ubuntu 7.3.0-16ubuntu3)
configuration: --prefix=/usr --extra-version=0ubuntu0.18.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
WARNING: library configuration mismatch
avcodec configuration: --prefix=/usr --extra-version=0ubuntu0.18.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared --enable-version3 --disable-doc --disable-programs --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-libtesseract --enable-libvo_amrwbenc
libavutil 55. 78.100 / 55. 78.100
libavcodec 57.107.100 / 57.107.100
libavformat 57. 83.100 / 57. 83.100
libavdevice 57. 10.100 / 57. 10.100
libavfilter 6.107.100 / 6.107.100
libavresample 3. 7. 0 / 3. 7. 0
libswscale 4. 8.100 / 4. 8.100
libswresample 2. 9.100 / 2. 9.100
libpostproc 54. 7.100 / 54. 7.100
nan : 0.000 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
pipe:: Invalid data found when processing input
sudo de-ip-hdmi -interface wlo0 -raw | vlc
VLC media player 3.0.4 Vetinari (revision 3.0.4-0-gf615db6332)
[sudo] password for andrew: [000055d37c55b570] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
[000055d37c5eb660] main playlist: playlist is empty
QObject::~QObject: Timers cannot be stopped from another thread
from de-ip-hdmi.
benjojo
commented on May 27, 2024
You are using a wireless interface there, You should connect the ethernet directly to the system for best results, otherwise MAC spoofing etc will not work
from de-ip-hdmi.
Heath3827
commented on May 27, 2024
Same results on wired.
from de-ip-hdmi.
benjojo
commented on May 27, 2024
Are you sure you entered your sudo password? I've been tripped up by that a
few times...
…On Sat, 22 Jun 2019, 17:55 Heath3827, ***@***.***> wrote:
Same results on wired.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#13?email_source=notifications&email_token=AALPK4XMVRHSBOVZUSXGMP3P3ZKR3A5CNFSM4H2XBJFKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODYKNJ5Q#issuecomment-504681718>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AALPK4WCNYF2KR7X77OQO4DP3ZKR3ANCNFSM4H2XBJFA>
.
from de-ip-hdmi.
Heath3827
commented on May 27, 2024
Yes, and am not getting wrong password errors. If it helps, I installed the .deb build. IP if the sender unit is currently 192.168.1.9.
from de-ip-hdmi.
benjojo
commented on May 27, 2024
Hmph. I think the version of the sender you have is not the one supported
by this software. Since V2 devices do not grab a IP address.
Can you look at the PCB for what version the board is? This software only
supports V2 devices, and they are much less common these days
…On Sat, 22 Jun 2019, 18:21 Heath3827, ***@***.***> wrote:
Yes, and am not getting wrong password errors. If it helps, I installed
the .deb build. IP if the sender unit is currently 192.168.1.9.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#13?email_source=notifications&email_token=AALPK4X42YDRBBOGKNMFDK3P3ZNSRA5CNFSM4H2XBJFKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODYKNYYA#issuecomment-504683616>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AALPK4T7VALKQWF6DQ63VGTP3ZNSRANCNFSM4H2XBJFA>
.
from de-ip-hdmi.
Heath3827
commented on May 27, 2024
The box has a V3 legend but the board looks to have a Ver1.0 marking. Interior looks quite different to the photo on your blog page.
from de-ip-hdmi.
benjojo
commented on May 27, 2024
That board is not compatible with this software, sorry!
…On Sat, 22 Jun 2019, 18:45 Heath3827, ***@***.***> wrote:
The box has a V3 legend but the board looks to have a Ver1.0 marking.
Interior looks quite different to the photo on your blog page.
[image: 20190623_013353]
<https://user-images.githubusercontent.com/31277724/59967095-30ce5500-9558-11e9-80b2-698094f80b1c.jpg>
[image: 20190623_013418]
<https://user-images.githubusercontent.com/31277724/59967096-3166eb80-9558-11e9-925f-9c1caefb51e9.jpg>
[image: 20190623_013438]
<https://user-images.githubusercontent.com/31277724/59967097-3166eb80-9558-11e9-977e-48a1ef11c73e.jpg>
[image: 20190623_013444]
<https://user-images.githubusercontent.com/31277724/59967098-31ff8200-9558-11e9-9adb-94d0ff57a278.jpg>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#13?email_source=notifications&email_token=AALPK4WLOBHPK6GFZ65YZJ3P3ZQMVA5CNFSM4H2XBJFKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODYKOGFI#issuecomment-504685333>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AALPK4SXOBOXK5RIVNT7RB3P3ZQMVANCNFSM4H2XBJFA>
.
from de-ip-hdmi.
Heath3827
commented on May 27, 2024
Any ideas on an alternative?
from de-ip-hdmi.
benjojo
commented on May 27, 2024
You want this: https://blog.danman.eu/new-version-of-lenkeng-hdmi-over-ip-extender-lkv373a/
from de-ip-hdmi.
Related Issues (15)
- Clues for device compatibility HOT 5
- How to use it for streaming in OBS? HOT 1
- not enough arguments in call to raw.ListenPacket HOT 1
- Raspberry compatible - compilation fails? HOT 1
- Can't retrieve video stream HOT 14
- Unable to capture output HOT 1
- Streaming to STDOUT remains empty
- BroadcastWakeups() might not be assembling packet correctly HOT 3
- Darker output could be because of gamma getting applied twice ? HOT 2
- can't build working code HOT 19
- Incorrect assignment of chunk?
- No JPEG data found in image HOT 1
- IR over IP support? HOT 3
- Support for lenking 3.0 HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from de-ip-hdmi.