Comments (11)
beckyricha
commented on July 23, 2024
If you don't want to use a hub, use the cloud version. It doesn't need a hub. The LAN version is designed to pass the commands through a hub on your LAN. I have not been updating they one, so please advise if it gives you any issues and i can try to correct them.
Becky
On Jan 3, 2017 10:58 AM, muezalmanna <[email protected]> wrote:using the rm bridge LAN , is there any way to add my devices to smartthings account without having a hub? , the bridge, the codes, the handler are fine but i dont have any hub in my location
—You are receiving this because you are subscribed to this thread.Reply to this email directly, view it on GitHub, or mute the thread.
from broadlink-rm-smartthings-alexa.
muezalmanna
commented on July 23, 2024
Thanks for the support Becky
i did what you told me and after 3 hours of resetting and configuring i got alexa to discover the devices i created, but it doesn't send any signal to my rm pro.
(the dynamic dns is fine, the eControl app works fine, the bridge is on and the ip & port are set static, the codes are learned & named in the rm bridge portal "Tv on","Tv off" & works fine, i added the device handler in smartthings and entered my ddns link and port as shown in the readme file, finally i created the device and alexa discovered it) Yet i don't see the orange blink in the rm pro when i as alexa to turn on and off.
from broadlink-rm-smartthings-alexa.
beckyricha
commented on July 23, 2024
Hi. Sorry it sounds like this had been a painful process for you. It's hard to troubleshoot this one remotely, but I'll give it a shot. What happens when you try to control the devices from your smart things app?
On Jan 4, 2017 1:05 PM, muezalmanna <[email protected]> wrote:Thanks for the support Becky
i did what you told me and after 3 hours of resetting and configuring i got alexa to discover the devices i created, but it doesn't send any signal to my rm pro.
(the dynamic dns is fine, the eControl app works fine, the bridge is on and the ip & port are set static, the codes are learned & named in the rm bridge portal "Tv on","Tv off" & works fine, i added the device handler in smartthings and entered my ddns link and port as shown in the readme file, finally i created the device and alexa discovered it) Yet i don't see the orange blink in the rm pro when i as alexa to turn on and off.
—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or mute the thread.
from broadlink-rm-smartthings-alexa.
beckyricha
commented on July 23, 2024
Also, when you set up the rm bridge and choose a port, did you also forward that port to the Android device on your router?
I'll also take another look back at those cloud based instructions when i get home tonight and make sure everything I've learned through using the LAN version since initial publication is reflected there but as well.
from broadlink-rm-smartthings-alexa.
muezalmanna
commented on July 23, 2024
When alexa send the signal to smartthing to turn on the device but it seems like smartthings can't access the rm, either the router or the bridge isn't connected properly
,,,, I did forward the port to the android static ip from the router settings
from broadlink-rm-smartthings-alexa.
beckyricha
commented on July 23, 2024
When you use the smart thing app without Alexa, can that control it?
On Jan 4, 2017 1:36 PM, muezalmanna <[email protected]> wrote:When alexa send the signal to smartthing to turn on the device but it seems like smartthings can't access the rm, either the router or the bridge isn't connected properly
,,,, I did forward the port to the android static ip from the router settings
—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or mute the thread.
from broadlink-rm-smartthings-alexa.
muezalmanna
commented on July 23, 2024
I just tried the smartthings app it didn't control it
from broadlink-rm-smartthings-alexa.
beckyricha
commented on July 23, 2024
Then i will need to take another look at the code and make sure it's OK. I'll get back to you in a few hours.
On Jan 4, 2017 4:13 PM, muezalmanna <[email protected]> wrote:I just tried the smartthings app it didn't control it
—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or mute the thread.
from broadlink-rm-smartthings-alexa.
beckyricha
commented on July 23, 2024
I tried the code as posted and it didn't work for me either, but I found and corrected a bug so that it does. Try the new device handler code, or just change line 45 in your already inserted version. Where it reads "device.displayName" that should just be device.name. I also had issues at first because I used the LAN instructions instead of cloud ones. Make sure your uri is in the format "http://username:[email protected]:yourport" or, if you have not entered security info, just http://your.ip.address:yourport. Once I got those right, mine worked fine. Sorry about that, and thanks for helping to find this, even if the unfortunate and hard way :) Please let me know whether this resolves your issue.
Becky
from broadlink-rm-smartthings-alexa.
muezalmanna
commented on July 23, 2024
Yessssss it worked finally,
Alexa and smartthings could send commands to rm pro now, even tho the TV didn't turn on, the signal was sent fine.
Later after work I'll learn the codes again and create other devices, it shall work
Thank you Becky you were great help
from broadlink-rm-smartthings-alexa.
beckyricha
commented on July 23, 2024
Sorry it was about a bug. I'm glad it works.
On Jan 4, 2017 11:00 PM, muezalmanna <[email protected]> wrote:Yessssss it worked finally,
Alexa and smartthings could send commands to rm pro now, even tho the TV didn't turn on, the signal was sent fine.
Later after work I'll learn the codes again and create other devices, it shall work
Thank you Becky you were great help
—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or mute the thread.
from broadlink-rm-smartthings-alexa.
Related Issues (20)
- Some of the devices not working from Smartthings HOT 5
- Almost certainly something I am missing. Can't get ST to control the RM2 HOT 2
- Duplicated end of comment section cause RM Bridge Switch Cloud Multikeys to fail adding as handler
- Example for RF switch
- Alexa unable to discover devices in RM Tasker plugin on Android TV box HOT 1
- Downgrade of RM pro+ can brick the device HOT 15
- Rm 2 check data failed
- Location
- Different codes while learning... normal? HOT 4
- Smarthings Hub not linking to Alexa correctly HOT 1
- RM Plugin Lite issue HOT 2
- RM Bridge not working?
- New issue with RM frequency learning HOT 1
- RM MINI 3 cant connect to internet
- error groovy.lang.MissingPropertyException HOT 1
- rm pro + no permissions
- Only the off command is working HOT 11
- java.lang.IllegalArgumentException: Text must not be null or empty @line 66 (lanResponseHandler)
- Location - Create device HOT 5
- Unable to load codes from RM Bridge host HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from broadlink-rm-smartthings-alexa.